Fuel and Exhaust System

Fuel pump

~1min read

GENERAL INFORMATION

The pump is removed together with the fuel level sensor (see subsection 6.2.9). Removal

PROCEDURE

1. If necessary, remove the filter from the bracket at the bottom of the pump. Bend back the tabs and remove the pump from the plastic housing.

2. Clean the pump, check the condition of the filter, and replace it if necessary.

Installation

PROCEDURE

1. Install the pump in the plastic housing and install the filter.

2. Assemble the pump with the sensor (see figure in subsection 6.2.9).

Test yourself

A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.