Dtc/circuit Diagnosis (C1f05-49 Front Camera Unit ... C1f70-87 Ethernet Circuit)
- C1f05-49 Front Camera Unit
- C1f05-4b Front Camera Unit
- C1f05-54 Front Camera Unit
- C1f05-82 Front Camera Unit
- C1f36-55 Configuration
- C1f43-04 Around View Monitor Control Unit
- C1f48-16 Abs/tcs/vdc System
- C1f48-62 Abs/tcs/vdc System
- C1f5f-04 Distance Sensor
- C1f70-87 Ethernet Circuit
C1f05-49 Front Camera Unit Nissan Pathfinder
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F05 | 49 | Front camera unit (Front camera unit) |
Diagnosis condition | When engine is running |
| Signal (terminal) | — | |||
| Threshold | If front camera unit is malfunctioning | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
Front camera unit
FAIL-SAFE
The following systems are canceled.
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Steering wheel assistance function
AEB
LDW
I-LI
I-BSI
TSR
CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine.
Perform “Diagnosis (One System)” of "ICC/ADAS 2" with CONSULT.
Check if the “C1F05-49” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F05-49” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1 >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC confirmation procedure again. Refer to DTC Description.
Is “C1F05-49” detected as the current malfunction?
YES>>Replace the front camera unit. Refer to Removal and Installation.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
C1f05-4b Front Camera Unit Nissan Pathfinder Fifth generation
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F05 | 4B | Front camera unit (Front camera unit) |
Diagnosis condition |
|
| Signal (terminal) | — | |||
| Threshold | Temperature around front camera unit is excessively high | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
Interior room temperature is excessively high
FAIL-SAFE
The following systems are canceled.
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Steering wheel assistance function
AEB
LDW
I-LI
I-BSI
TSR
CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
Turn the ignition switch OFF.
Wait for 10 minutes or more.
Start the engine.
Turn the AEB system ON.
Perform “All DTC Reading” with CONSULT.
Check if the “C1F05-4B” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F05-4B” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1 >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK ADAS CONTROL UNIT 2 SELF-DIAGNOSIS RESULTS
Erase all self-diagnosis results with CONSULT.
Perform “All DTC Reading”.
Check if the “C1F05-4B” is detected in “Self Diagnostic Result” of “ICC/ADAS 2”
Is “C1F05-4B” detected?
YES>>Replace the front camera unit. Refer to Removal and Installation.
NO>>INSPECTION END
C1f05-54 Front Camera Unit Nissan Pathfinder SUV
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F05 | 54 | Front camera unit (Front camera unit) |
Diagnosis condition |
|
| Signal (terminal) | — | |||
| Threshold | Camera aiming is not completed | |||
| Diagnosis delay time | 10 seconds or more | |||
POSSIBLE CAUSE
Front camera unit aiming is not adjusted
Front camera unit aiming adjustment has been interrupted
FAIL-SAFE
The following systems are canceled.
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Steering wheel assistance function
AEB
LDW
I-LI
I-BSI
TSR
CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine.
Drive the Nissan Pathfinder vehicle at 5 km/h or more.
Perform “All DTC Reading” with CONSULT.
Check if the “C1F05-54” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F05-54” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1 >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2 >>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CAMERA AIMING ADJUSTMENT
Perform the camera aiming. Refer to Work Procedure.
Erase all self-diagnosis results with CONSULT.
Perform “All DTC Reading”.
Check if the “C1F05-54” is detected in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F05-54” detected?
YES>>Replace the front camera unit. Refer to Removal and Installation.
NO>>INSPECTION END
C1f05-82 Front Camera Unit Nissan Pathfinder
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F05 | 82 | Front camera unit (Front camera unit) |
Diagnosis condition |
|
| Signal (terminal) | CAN communication signal | |||
| Threshold | ADAS control unit 2 detects an error signal that is received from lane camera via CAN communication | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
Front camera unit
FAIL-SAFE
The following systems are canceled.
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Steering wheel assistance function
AEB
LDW
I-LI
I-BSI
TSR
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F05-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine.
Turn the AEB system ON.
Perform “All DTC Reading” with CONSULT.
Check if the “C1F05-82” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F05-82” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1 >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2 >>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F05-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
CHECK FRONT CAMERA UNIT SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “LANE CAMERA”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
C1f36-55 Configuration Nissan Pathfinder 2026
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F36 | 55 | CONFIG UNFINISHED (Configuration unfinished) |
Diagnosis condition |
|
| Signal (terminal) | — | |||
| Threshold | The Nissan Pathfinder vehicle specifications of ADAS control unit 2 is incomplete. | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
Vehicle specifications for ADAS control unit 2 is incomplete.
FAIL-SAFE
The following systems are canceled.
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Steering wheel assistance function
AEB
RAB
I-FCW
LDW
I-LI
I-BSI
TSR
I-DA
CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine.
Turn the AEB system ON.
Perform “All DTC Reading” with CONSULT.
Check if the “C1F36-55” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F36-55” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1 >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
PERFORM CONFIGURATION OF ADAS CONTROL UNIT 2
Perform configuration of ADAS control unit 2 when DTC “C1F36-55” is detected.
>>Perform configuration of ADAS control unit 2. Refer to Work Procedure.
C1f43-04 Around View Monitor Control Unit Nissan Pathfinder SUV
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F43 | 04 | Around view control unit (Around view control unit) |
Diagnosis condition | When AEB system is ON |
| Signal (terminal) | — | |||
| Threshold | If around view monitor control unit is malfunctioning | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
Around view monitor control unit
ADAS control unit 2
FAIL-SAFE
None
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F43-04” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine.
Turn the AEB system ON.
Perform “All DTC Reading” with CONSULT.
Check if the “C1F43-04” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F43-04” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F43-04” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM SELF-DIAGNOSIS OF AROUND VIEW MONITOR CONTROL UNIT
Check if any DTC is detected in “Self Diagnostic Result” of “AVM”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
C1f48-16 Abs/tcs/vdc System Nissan Pathfinder
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F48 | 16 | ABS/TCS/VDC CIRC (Anti-lock braking system/Traction control system/Nissan Pathfinder Vehicle dynamics control system circuit) |
Diagnosis condition |
|
| Signal (terminal) | — | |||
| Threshold | ABS actuator and electric unit (control unit) power supply voltage is excessively low | |||
| Diagnosis delay time | 60 seconds or more | |||
POSSIBLE CAUSE
ABS actuator and electric unit (control unit) power supply circuit
ABS actuator and electric unit (control unit)
FAIL-SAFE
The following systems are canceled.
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Steering wheel assistance function
AEB
RAB
I-FCW
LDW
I-LI
I-BSI
TSR
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F48–16” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine.
Turn the AEB system ON.
Perform “All DTC Reading” with CONSULT.
Check if the “C1F48–16” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F48–16” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F48–16” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
CHECK POWER SUPPLY CIRCUIT OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Check power supply circuit of ABS actuator and electric unit (control unit).
Is the inspection result normal?
YES>>Perform self-diagnosis of ABS actuator and electric unit (control unit). Refer to DTC Index.
NO>>Repair the harnesses or connectors.
C1f48-62 Abs/tcs/vdc System Nissan Pathfinder Fifth generation
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F48 | 62 | ABS/TCS/VDC CIRC (Anti-lock braking system/Traction control system/Nissan Pathfinder Vehicle dynamics control system circuit) |
Diagnosis condition |
|
| Signal (terminal) | CAN communication signal | |||
| Threshold | If the Nissan Pathfinder vehicle speed signal (wheel speed) from ABS actuator and electric unit (control unit) and the output speed sensor signal from TCM, received by the ADAS control unit 2 via CAN communication, are inconsistent | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
Wheel speed sensor
ABS actuator and electric unit (control unit)
Output speed sensor
TCM
ADAS control unit 2
FAIL-SAFE
The following systems are canceled.
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Steering wheel assistance function
AEB
RAB
I-FCW
LDW
I-LI
I-BSI
TSR
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F48-62” is displayed with Network-DTC, “C1F48-04” first diagnose the Network-DTC, “C1F48-04”.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable.
Network-DTC: Refer to DTC Index.
C1F48-04: Refer to DTC Description.
GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine.
Turn the AEB system ON.
Drive the Nissan Pathfinder vehicle at 30 km/h or more.
Stop the Nissan Pathfinder vehicle.
Perform “All DTC Reading” with CONSULT.
Check if the “C1F48-62” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F48-62” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1 >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2 >>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F48-62” is displayed with Network-DTC, “C1F48-04” first diagnose the Network-DTC, “C1F48-04”.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable.
Network-DTC: Refer to DTC Index.
C1F48-04: Refer to DTC Description.
GO TO 2. .
CHECK TCM SELF-DIAGNOSIS RESULTS
Perform “All DTC Reading”.
Check if any DTC is detected in “Self Diagnostic Result” of “TRANSMISSION”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>GO TO 3.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “ABS”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
C1f5f-04 Distance Sensor Nissan Pathfinder Fifth generation
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F5F | 04 | Distance sensor (Distance sensor) |
Diagnosis condition | When engine is running |
| Signal (terminal) | — | |||
| Threshold | Distance sensor is malfunctioning | |||
| Diagnosis delay time | 5 seconds or more | |||
POSSIBLE CAUSE
Distance sensor
ADAS control unit 2
FAIL-SAFE
The following systems are canceled.
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Steering wheel assistance function
AEB
I-FCW
CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine.
Perform “All DTC Reading” with CONSULT.
Check if the “C1F5F-04” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F5F-04” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DISTANCE SENSOR SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “LASER/RADAR”.
Is any DTC detected?
YES>>Refer to DTC Index.
NO>>GO TO 2.
CHECK ADAS CONTROL UNIT 2 SELF-DIAGNOSIS RESULTS
Check if the “C1F5F-04” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F5F-04” detected?
YES>>Replace ADAS control unit 2. Refer to Removal and Installation.
NO>>INSPECTION END
C1f70-87 Ethernet Circuit Nissan Pathfinder Fifth generation
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F70 | 87 | Ethernet circuit (Ethernet circuit) |
Diagnosis condition | When engine is running |
| Signal (terminal) | Ethernet | |||
| Threshold | If ADAS control unit 2 is not receiving ethernet communication signal from front camera unit | |||
| Diagnosis delay time | 5 seconds or more | |||
POSSIBLE CAUSE
Ethernet harness
ADAS control unit 2
Front camera unit
FAIL-SAFE
The following systems are canceled.
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Steering wheel assistance function
AEB
RAB
I-FCW
LDW
I-LI
I-BSI
TSR
I-DA
CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine and wait at least 5 seconds.
Perform “All DTC Reading” with CONSULT.
Check if the DTC “C1F70-87” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is DTC “C1F70-87” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK CONNECTOR
Ignition switch OFF.
Check the ethernet harness connectors and terminals of ADAS control unit 2 and front camera unit for damage or looseness.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunction part, securely lock the harness connector.
PERFORM ALL DTC READING
Ignition switch ON.
Perform “All DTC Reading” with CONSULT.
Check if any DTCs of ethernet (DTC “C250C-88” and/or “U276B-88”) are detected in “Self Diagnostic Result” of “LANE CAMERA”
Are any DTCs of ethernet detected?
YES>>Replace the ADAS control unit 2 (Refer to Removal and Installation.), and GO TO 3.
NO>>Replace the front camera unit. Refer to Removal and Installation.
PERFORM DTC CONFIRMATION PROCEDURE-1
Erases all self-diagnosis results with CONSULT.
Perform DTC confirmation procedure again. Refer to DTC Description.
Is DTC “C1F70-87” detected as the current malfunction?
YES>>Replace the front camera unit (Refer to Removal and Installation), and GO TO 4.
NO>>INSPECTION END
PERFORM DTC CONFIRMATION PROCEDURE-2
Erases all self-diagnosis results with CONSULT.
Perform DTC confirmation procedure again. Refer to DTC Description.
Is DTC “C1F70-87” detected as the current malfunction?
YES>>Replace the ethernet harness between ADAS control unit 2 and front camera unit.
NO>>INSPECTION END