Audio, Visual & Navigation System - Basic Inspection
- Diagnosis and Repair Workflow
- Additional Service When Replacing Av Control Unit
- Additional Service When Replacing Bose Speaker Amp.
- Configuration (av Control Unit)
- Configuration (bose Speaker Amp.)
Diagnosis and Repair Workflow Nissan Pathfinder Fifth generation
Work Flow
OVERALL SEQUENCE

DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred).
>>GO TO 2.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition when the symptom is detected.
>>GO TO 3.
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON and wait for 2 seconds or more.
Select "Self Diagnostic Result" mode of "MULTI AV" and "AUDIO AMP.".
Are any DTCs displayed?
YES>>Refer to DTC Index (AV Control Unit) or DTC Index (Bose Speaker Amp.).
NO>>GO TO 4.
PERFORM SYMPTOM DIAGNOSIS
Refer to Symptom Table.
>>GO TO 5.
FINAL CHECK
Refer to symptom described by the customer in step 1.
Is the symptom still present?
YES>>GO TO 2.
NO>>Inspection End.
Additional Service When Replacing Av Control Unit Nissan Pathfinder SUV
Description
BEFORE REPLACEMENT
When replacing AV control unit, save or print current vehicle specification with CONSULT configuration before replacement.
AFTER REPLACEMENT
Complete the procedure of “After Replace ECU” in order.
If you set incorrect “After Replace ECU”, incidents might occur.
Configuration is different for each Nissan Pathfinder vehicle model. Confirm configuration of each vehicle model.
Work Procedure
SAVE VIN DATA (AV CONTROL UNIT)
CONSULT work support
Perform “SAVE VIN DATA” to save current VIN data.
>>GO TO 2.
SAVE “OPERATION LOG”
CONSULT
Save Operation Log, according to the procedure of “Programming” in CONSULT Operation Manual.
>>GO TO 3.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to Removal and Installation.
>>GO TO 4.
CHECK “OPERATION LOG”
CONSULT
Check “Operation Log” saved before replacing the AV control unit, according to the procedure of “Programming” in CONSULT Operation Manual.
Is there an applicable Operation Log in the Saved Data List?
YES>>GO TO 5.
NO>>GO TO 6.
PERFORM AV CONTROL UNIT PROGRAMMING
CONSULT
Perform AV control unit programming, according to “Programming” of CONSULT Operation Manual. Refer to CONSULT Operation Manual.
Ignition switch: ON
Electric load: OFF
Brake pedal: Not depressed
12V battery voltage: 12 – 13.5 V (Check the value displayed on the CONSULT screen.)
GO TO 8.
READ IN AV CONTROL UNIT PART NUMBER BY “FAST LINKED”
Obtain AV control unit part number by NISSAN PARTS CATALOGUE GLOBAL Web-FAST, according to the procedure of “FAST linked” in CONSULT Operation Manual. Refer to CONSULT Operation Manual.
>>GO TO 7.
PERFORM PROGRAMMING (FAST LINKED)
CONSULT
Perform AV control unit programming according to the procedure of FAST linked in CONSULT Operation Manual. Refer to CONSULT Operation Manual.
Ignition switch: ON
Electric load: OFF
Brake pedal: Not depressed
12V battery voltage: 12 – 13.5 V (Check the value displayed on the CONSULT screen.)
GO TO 8.
CONFIGURATION (AV CONTROL UNIT)
CONSULT Configuration
Perform configuration. Refer to Work Procedure.
>>GO TO 9.
WRITE VIN DATA (AV CONTROL UNIT)
CONSULT work support
Perform “WRITE VIN (SAVED DATA)” or “WRITE VIN (MANUAL INPUT)” to write VIN data.
>>GO TO 10.
CHECK NETWORK INITIAL SETTINGS
CONSULT work support
Perform “NETWORK INITIAL SETTINGS”.
YES>>Work End.
Additional Service When Replacing Bose Speaker Amp. Nissan Pathfinder 5th Gen
Description
BEFORE REPLACEMENT
When replacing Bose speaker amp., save or print current vehicle specification with CONSULT configuration before replacement.
AFTER REPLACEMENT
Complete the procedure of “After Replace ECU” in order.
If you set incorrect “After Replace ECU”, incidents might occur.
Configuration is different for each Nissan Pathfinder vehicle model. Confirm configuration of each vehicle model.
Work Procedure
REPLACE BOSE SPEAKER AMP.
Replace Bose speaker amp. Refer to Removal and Installation.
YES>>GO TO 2.
CONFIGURATION (BOSE SPEAKER AMP.)
Perform Bose speaker amp. configuration. Refer to Work Procedure.
YES>>Work end.
Configuration (av Control Unit) Nissan Pathfinder SUV
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing AV control unit.
Configuration has three functions as follows:
| Function | Description |
|---|---|
| "Before Replace ECU" |
|
| "After Replace ECU" | Writes the Nissan Pathfinder vehicle configuration with manual selection. |
| "Select Saved Data List" | Writes the Nissan Pathfinder vehicle configuration with saved data. |
Work Procedure
WRITING MODE SELECTION
CONSULT Configuration
Select “Re/programming, Configuration” of "MULTI AV".
When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.
WRITING Nissan Pathfinder Vehicle SPECIFICATION
CONSULT Configuration
Select “Configuration” or “After Replace ECU”, and write the Nissan Pathfinder vehicle specification saved in CONSULT to AV control unit.
>>GO TO 4.
WRITE Nissan Pathfinder Vehicle SPECIFICATION
CONSULT Configuration
Select “Re/programming, Configuration” of "MULTI AV".
Select “Manual Configuration”, and write the setting value as shown in the following table to AV control unit according to the Nissan Pathfinder vehicle specification.
MANUAL SETTING ITEM Detail Items Setting value NAVIGATION WITH Models with navigation system WITHOUT Models without navigation system SOUND SYSTEM BOSE Models with Bose audio NORMAL 6SPKS Models without Bose audio CAMERA SYSTEM NONE or AVM ph3 Models with Intelligent around view monitor system REAR Models with rear view monitor system SONAR TYPE None Models without sonar REAR Models with sonar PREDICTIVE COURSE LINE Without or with (with AVM) Models with Intelligent around view monitor or without camera With (Rear view camera) Models with rear view monitor
GO TO 4.
PERFORM SELF-DIAGNOSIS
CONSULT Self Diagnostic Result
Perform self-diagnosis of CONSULT, and check whether or not DTC B1341–55 is detected.
Is DTC B1341–55 detected?
YES>>GO TO 1.
NO>>GO TO 5.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
YES>>Work End.
Configuration (bose Speaker Amp.) Nissan Pathfinder
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing Bose speaker amp.
Configuration has three functions as follows:
| Function | Description |
|---|---|
| "Before Replace ECU" |
|
| "After Replace ECU" | Writes the Nissan Pathfinder vehicle configuration with manual selection. |
| "Select Saved Data List" | Writes the Nissan Pathfinder vehicle configuration with saved data. |
Work Procedure
WRITING MODE SELECTION
CONSULT Configuration
Select “Re/programming, Configuration” of "AUDIO AMP.".
>>GO TO 2.
WRITING Nissan Pathfinder Vehicle SPECIFICATION
CONSULT Configuration
Select “Configuration” or “After Replace ECU”, and write the Nissan Pathfinder vehicle specification saved in CONSULT to Bose speaker amp.
>>GO TO 3.
OPERATION CHECK
Check that the operation of the Bose speaker amp. is normal.
YES>>Work End.