Body Control System - Removal and Installation
In this manual: Body Control System - Removal and Installation
~1min read
- Bcm
- Combination Switch
Bcm Nissan Pathfinder
Removal and Installation
REMOVAL
Disconnect the negative battery terminal.
Remove instrument lower panel (LH). Refer to Removal and Installation.
Disconnect the harness connectors from the BCM.
Remove bolts (A) and remove BCM (1).

INSTALLATION
Installation is in the reverse order of removal.
Combination Switch Nissan Pathfinder Fifth generation
Exploded View

| 1. | Steering column | 2. | Combination switch |
Removal and Installation
REMOVAL
Remove steering angle sensor. Refer to Removal and Installation.
Disconnect the harness connector from the combination switch.
Remove the combination switch screw.
Remove the combination switch.
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?