Power Control System - Basic Inspection
- Additional Service When Replacing Ipdm E/r
- Configuration (ipdm E/r)
Additional Service When Replacing Ipdm E/r Nissan Pathfinder Fifth generation
Description
After replaced IPDM E/R, it is necessary to perform control unit configuration with CONSULT. For details, refer to Work Procedure.
AFTER REPLACEMENT
When replacing IPDM E/R, write vehicle specification with CONSULT vehicle configuration.
Work Procedure
REPLACE IPDM E/R
Replace IPDM E/R. Refer to Removal and Installation.
>>GO TO 2.
WRITING Nissan Pathfinder Vehicle SPECIFICATION
Perform configuration (IPDM E/R). Refer to Description.
>>Work End.
Configuration (ipdm E/r) Nissan Pathfinder 5th Gen
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the IPDM E/R.
The configuration requires a network connection. CONSULT connects to the network and then it downloads the configuration data from the server. Then CONSULT writes the Nissan Pathfinder vehicle specification to the IPDM E/R.
Refer to Work Procedure.
With this configuration there is no need to “save” configuration data from the IPDM E/R. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
Work Procedure
WRITING VEHICLE SPECIFICATION
CONSULT
Perform writing Nissan Pathfinder vehicle specification to the IPDM E/R following "Automatic Configuration" procedure of "Configuration" according to the CONSULT Operation Manual.
>>Work End.