Warning Chime System - Dtc/circuit Diagnosis
- Meter Buzzer Circuit
- Front Seat Belt Buckle Switch Lh Signal Circuit
Meter Buzzer Circuit Nissan Pathfinder SUV
Description
The combination meter sounds the warning buzzer based on the signals transmitted from various units.
Component Function Check
CHECK COMBINATION METER INPUT SIGNAL
CONSULT
Select “Data Monitor” mode of “METER/M&A”.
Select “BUZZER”.
Check that the function operates normally according to the following conditions:
Monitor item Condition Status BUZZER Under the condition of buzzer input ON Except above OFF
Is the inspection result normal?
YES>>Inspection End.
NO>>Refer to Diagnosis Procedure.
Diagnosis Procedure
CHECK MASTER SPEAKER CIRCUIT
Check master speaker circuit. Refer to Diagnosis Procedure (Full TFT meter) or Diagnosis Procedure (7 Inch information display).
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation (Full TFT meter) or Removal and Installation (7 Inch information display).
NO>>Repair power supply circuit of combination meter.
Front Seat Belt Buckle Switch Lh Signal Circuit Nissan Pathfinder R53
Description
Transmits the front seat belt buckle switch LH signal to the BCM.
Component Function Check
CHECK BCM INPUT SIGNAL
CONSULT
Select “Data Monitor” mode of “BCM” and check the "Seat belt switch (driver)" monitor value.
| Monitor item | Condition | Status |
|---|---|---|
| Seat belt switch (driver) | When driver seat belt is fastened | OFF |
| When driver seat belt is unfastened | ON |
Inspection End.
NO>>Refer to Diagnosis Procedure.
Diagnosis Procedure
CHECK BCM INPUT SIGNAL
Ignition switch ON.
Check voltage between BCM harness connector and ground.
(+) (-) Condition Voltage
(Approx.)BCM Connector Terminal M18 17 Ground When driver seat belt is fastened Battery voltage When driver seat belt is unfastened 0 V
Is the inspection result normal?
YES>>Replace BCM. Refer to Removal and Installation.
NO>>GO TO 2.
CHECK FRONT SEAT BELT BUCKLE SWITCH LH CIRCUIT
Ignition switch OFF.
Disconnect BCM harness connector and front seat belt buckle switch LH harness connector.
Check continuity between BCM harness connector and front seat belt buckle switch LH harness connector.
BCM Front seat belt buckle switch LH Continuity Connector Terminal Connector Terminal M18 17 B225 1 Yes Check continuity between BCM harness connector and ground.
BCM — Continuity Connector Terminal M18 17 Ground No
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace harness or connectors.
CHECK FRONT SEAT BELT BUCKLE SWITCH LH GROUND CIRCUIT
Check continuity between front seat belt buckle switch LH harness connector and ground.
| Front seat belt buckle switch LH | — | Continuity | |
|---|---|---|---|
| Connector | Terminal | ||
| B225 | 2 | Ground | Yes |
Is the inspection result normal?
YES>>Check the front seat belt buckle switch LH. Refer to Component Inspection.
NO>>Repair or replace harness or connectors.
Component Inspection
CHECK FRONT SEAT BELT BUCKLE SWITCH LH
Ignition switch OFF.
Disconnect the front seat belt buckle switch LH.
Check continuity between the front seat belt buckle switch LH terminals.
Front seat belt buckle switch LH Condition Continuity Terminals 1 2 When driver seat belt is fastened No When driver seat belt is unfastened Yes
Is the inspection result normal?
YES>>Inspection End.
NO>>Replace the front seat belt buckle switch LH. Refer to Removal and Installation.