Drive Mode System - System
- Drive Mode Selector
- Information Display (combination Meter)
- Warning/indicator/chime List
Drive Mode Selector Nissan Pathfinder 5th Gen
System Description (2WD Models)
By operating the drive mode select switch, the driving mode of TOW, SPORT, STANDARD, ECO, and SNOW can be selected.
The drive mode selector changes the driving mode of following system.
Power train
Steering
Intelligent trace control
Brake control system
Driver assistance system
SYSTEM DIAGRAM

| Component | Signal description | ||
|---|---|---|---|
| BCM | Mainly transmits the following signals to chassis control module via CAN communication.
|
||
| ECM | Mainly receives the following signals from chassis control module via CAN communication.
|
||
| ABS actuator and electric unit (control unit) | Mainly receives the following signals from chassis control module via CAN communication.
|
||
| Combination meter | Mainly receives the following signals from chassis control module via CAN communication.
|
||
| EPS control unit | Mainly receives the following signals from chassis control module via CAN communication.
|
||
| ADAS control unit 2 | Mainly receives the following signals from chassis control module via CAN communication.
|
||
| Chassis control module | Chassis control module controls the drive mode selector. | ||
| Drive mode select switch | Refer to Drive Mode Select Switch. |
CONTROL DESCRIPTION
Drive mode select switches driving mode by drive mode select switch installed on center console finisher.
Drive mode selector starts from STANDARD mode when the ignition switch ON.
The Nissan Pathfinder vehicle characteristics are controlled from the STANDARD mode to any mode listed below:
TOW The mode controls the shifting points to facilitate the acceleration and deceleration while towing. SPORT Adjusts the engine points for a higher response.
The setting of the steering system is adjusted to moderately increase steering wheel effort for a sporty feel.
ECO Assists the driver’s eco-driving. The engine points are adjusted for improved fuel economy, providing such a driving features as smooth starting or constant cruising. SNOW This mode makes it easier to start and run from snowy roads and frozen roads. For relationship between drive mode and each control item, refer to the following table.
×: Change from STANDARD
Items Drivemode Control TOW SPORT ECO SNOW Engine × × × Change characterisitic of throttle opening, and engine torque control Steering × Controls mode and response of steering Intelligent trace control × × Controls intelligent trace control Brake control system Controls braking force Driver assistance function × Controls ADAS function
ENGINE CHARACTERISTICS
The engine output characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Engine output STANDARD Normal SNOW Accelerator opening characteristics is more passive. ECO Accelerator opening characteristics is more passive. SPORT Accelerator opening characteristics is more aggressive. TOW* Normal *: The stop/start system is not activated.
STEERING CHARACTERISTICS
The steering characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Steering status STANDARD Normal SNOW Normal ECO Normal SPORT Heavy TOW Normal
INTELLIGENT TRACE CONTROL CHARACTERISTICS
The intelligent trace control characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Intelligent trace control status STANDARD Normal SNOW Normal ECO Normal SPORT OFF TOW OFF
BRAKE CONTROL SYSTEM CHARACTERISTICS
The brake control system characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Brake control system status STANDARD Normal SNOW Normal ECO Normal SPORT Normal TOW Normal
DRIVER ASSISTANCE CHARACTERISTICS
The Driver assistance function characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Driver assistance status STANDARD Normal SNOW ICC:OFF
ProPILOT:OFF
I-LI:OFF
BLIND SPOT INTERVENTION:OFF
ECO Normal SPORT Normal TOW Normal
System Description (4WD Models)
By operating the drive mode select switch, the driving mode of SAND, MUD/RUT, SNOW, AUTO, ECO, SPORT, and TOW can be selected.
The drive mode selector changes the driving mode of following system.
Power train
Steering
Intelligent trace control
Brake control system
Driver assistance system
4WD function
SYSTEM DIAGRAM

| Component | Signal description | |
|---|---|---|
| BCM | Mainly transmits the following signals to chassis control module via CAN communication.
|
|
| ECM | Mainly receives the following signals from chassis control module via CAN communication.
|
|
| ABS actuator and electric unit (control unit) | Mainly receives the following signals from chassis control module via CAN communication.
|
|
| Combination meter | Mainly receives the following signals from chassis control module via CAN communication.
|
|
| EPS control unit | Mainly receives the following signals from chassis control module via CAN communication.
|
|
| ADAS control unit 2 | Mainly receives the following signals from chassis control module via CAN communication.
|
|
| 4WD control unit | Mainly receives the following signals from chassis control module via CAN communication.
|
|
| Chassis control module | Chassis control module controls the drive mode selector. | |
| Drive mode select switch | Refer to Drive Mode Select Switch. | |
CONTROL DESCRIPTION
Drive mode select switches driving mode by drive mode select switch installed on center console finisher.
Drive mode selector starts from AUTO mode when the ignition switch ON.
The Nissan Pathfinder vehicle characteristics are controlled from the AUTO mode to any mode listed below:
SAND This mode allows for easier driving or starting on sand. MUD/RUT This mode allows for easier driving or starting on a bumpy road surface such as an uneven dirt road or a steep uphill slope. SNOW This mode makes it easier to start and run from snowy roads and frozen roads. ECO Assists the driver’s eco-driving. The engine points are adjusted for improved fuel economy, providing such a driving features as smooth starting or constant cruising. SPORT Adjusts the engine points for a higher response.
The setting of the steering system is adjusted to moderately increase steering wheel effort for a sporty feel.
TOW The mode controls the shifting points to facilitate the acceleration and deceleration while towing. For relationship between drive mode and each control item, refer to the following table.
×: Change from AUTO
Items Drivemode Control SAND MUD/RUT SNOW ECO SPORT TOW Engine × × × × × Change characteristic of throttle opening, and engine torque control Steering × Controls mode and response of steering Intelligent trace control × × × × Controls intelligent trace control Brake control system × Controls braking force 4WD system × × × Controls drive torque distribution Driver assistance function × × × Controls ADAS function
ENGINE CHARACTERISTICS
The engine output characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Engine output AUTO Normal SAND Accelerator opening characteristics is more aggressive. MUD/RUT Accelerator opening characteristics is more aggressive. SNOW Accelerator opening characteristics is more passive. ECO Accelerator opening characteristics is more passive. SPORT Accelerator opening characteristics is more aggressive. TOW* Normal *: The stop/start system is not activated.
STEERING CHARACTERISTICS
The steering characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Steering status AUTO Normal SAND Normal MUD/RUT Normal SNOW Normal ECO Normal SPORT Heavy TOW Normal
INTELLIGENT TRACE CONTROL CHARACTERISTICS
The intelligent trace control characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Intelligent trace control status AUTO Normal SAND OFF MUD/RUT OFF SNOW Normal ECO Normal SPORT OFF TOW OFF
BRAKE CONTROL SYSTEM CHARACTERISTICS
The brake control system characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Brake control system status AUTO Normal SAND Normal MUD/RUT Quicker BLSD Pressure Build SNOW Normal ECO Normal SPORT Normal TOW Normal
4WD SYSTEM CHARACTERISTICS
The 4WD system characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch 4WD system status AUTO Normal SAND The optimal driving torque is distributed according to the driving mode selected. MUD/RUT The optimal driving torque is distributed according to the driving mode selected. SNOW The optimal driving torque is distributed according to the driving mode selected. ECO Normal SPORT Normal TOW Normal
DRIVER ASSISTANCE CHARACTERISTICS
The Driver assistance function characteristics when a mode is switched with the drive mode select switch is as follows.
Drive mode select switch Driver assistance status AUTO Normal SAND ICC:OFF
ProPILOT:OFF
I-LI:OFF
BLIND SPOT INTERVENTION:OFF
MUD/RUT ICC:OFF
ProPILOT:OFF
I-LI:OFF
BLIND SPOT INTERVENTION:OFF
SNOW ICC:OFF
ProPILOT:OFF
I-LI:OFF
BLIND SPOT INTERVENTION:OFF
ECO Normal SPORT Normal TOW Normal
Information Display (combination Meter) Nissan Pathfinder R53
Drive Mode Indicator
| Item | Symbol | Function |
|---|---|---|
| Drive mode indicator | ![]() |
The following drive modes are indicated by operating drive mode select switch. Refer to System Description (2WD Models) (2WD Models), System Description (4WD Models) (4WD Models)
|
Warning/indicator/chime List Nissan Pathfinder Fifth generation
Warning/Indicator (On Information Display)
| Item | Reference |
|---|---|
| Drive mode indicator | Refer to Drive Mode Indicator. |
