Lan System - System Description
- Component Parts
- System
- Diagnosis System (can Gateway)
Component Parts Nissan Pathfinder 5th Gen
Can Gateway System
Component Parts Location

| A. | Left side of glovebox |
| No. | Component | Function |
|---|---|---|
| 1. | 8CH CAN gateway | Refer to 8CH CAN Gateway. |
8CH CAN Gateway
EXPLANATIONS OF COMPONENT PARTS
Component Function Within The System
—
Individual Component Function
8CH CAN gateway transmits CAN signals from each network.
Without ethernet harness connector

With ethernet harness connector

Component Operation
Refer to System Description.
Component Parts Location
8CH CAN gateway is installed at behind the instrument panel. Refer to Component Parts Location.
System Nissan Pathfinder Fifth generation
8ch Can Gateway
System Description
8CH CAN GATEWAY
System Diagram
With Automatic Emergency Braking 
Without Automatic Emergency Braking 
System Description
The 8CH CAN gateway system communicates between vehicle CAN communication circuits, ITS CAN communication circuits, chassis CAN communication circuits, IT CAN communication circuit, Drivetrain CAN communication circuit, and diagnostic CAN communication circuit.
This system selects and transmits only necessary information.
Diagnosis System (can Gateway) Nissan Pathfinder 5th Gen
8ch Can Gateway
CONSULT Function
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with 8CH CAN gateway.
| Diagnosis mode | CGW status | Function Description | ||
|---|---|---|---|---|
| Restricted Mode | Diag Test Mode | Open Mode | ||
| Self Diagnostic Result | Display | Display | Display | Display non–network DTC which 8CH CAN gateway memorizes. |
| CGW Information*1 | Display*1 | Display*1 | Display*1 |
|
| ECU Identification | Display | Display | Display | The 8CH CAN gateway part number is displayed. |
| CAN Diag Support Monitor*2 | Display | Display | Display | |
| Network-DTC*2 | Display | Display | Display | Display network DTC which 8CH CAN gateway memorizes when performing "Diagnosis (All System)". |
*1: In some vehicles, it is not malfunctioning in case of no display of "CGW Information". In this case, it is not necessary to switch the CGW status.
*2: Displays when performing "Diagnosis (All System)".
SELF DIAGNOSTIC RESULT
Refer to DTC Index.
When “CRNT” is displayed on “Self Diagnostic Result”
The system is presently malfunctioning.
When “PAST” is displayed on “Self Diagnostic Result”
System malfunction in the past is detected, but the system is presently normal.
Freeze Frame Data (FFD)
When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.
| Item name | Display item |
|---|---|
ODO/TRIP METER (km) |
Displays the total mileage when a DTC detected. |
CGW INFORMATION
Display the diagnosis mode which a user can perform in Diag Test mode/Open Mode by switching the CGW status form Restricted mode to Diag Test Mode/Open Mode.
Set to "Open Mode"
Refer to “CONSULT Operation Manual”.
Set to "Diag Test Mode"
Turn the ignition switch ON.
Depress accelerator pedal (5/8 or more) two times within 10 seconds.
Nissan Pathfinder Vehicle speed reaches 7,9 km/h or more.
Perform the following procedure.
Turn the ignition switch OFF.
Get out of the Nissan Pathfinder vehicle and close the driver side door.
Wait at least 3 minutes.
ECU IDENTIFICATION
The part number of 8CH CAN gateway is displayed.
CAN DIAG SUPPORT MONITOR
The results of receive diagnosis of CAN communication can be read.