Srs Air Bag Control System - Inspection and Adjustment
- Additional Service When Replacing Control Unit
- Zero Point Reset
Additional Service When Replacing Control Unit Nissan Pathfinder 2022
Description
AIR BAG DIAGNOSIS SENSOR UNIT
Vehicle specifications are not yet written in a new air bag diagnosis sensor unit. It is therefore necessary to write the specifications to the new unit and then perform “Re/programming, Configuration” with CONSULT.
OCS CONTROL UNIT
Special Repair Requirement
WORK PROCEDURE WHEN REPLACING OCS CONTROL UNIT
PERFORM ZERO POINT RESET
Perform zero point reset. Refer to Special Repair Requirement.
>>Inspection End.
Zero Point Reset Nissan Pathfinder
Description
Zero point reset is an initializing procedure for the OCS (weight) sensors that must be performed using CONSULT when removing and installing passenger seat or servicing the OCS system. If zero point reset is not performed, the initialization is incomplete and OCS may not operate normally.
Special Repair Requirement
PERFORM ZERO POINT RESET
CONSULT
Perform preliminary checks:
Select start on “Zero point reset function” screen from, “Work support” of “OCCUPANT DETECTION”.
“Zero point reset” starts.
GO TO 2.
CONFIRM RESET
Check that "Complete" is displayed on “Zero point reset function”.
Is zero point reset function "complete"?
YES>>Print out “Zero point reset current status” screen. Inspection end.
NO>>Recheck the preliminary check items and perform zero point reset function again.