Power Control System - System Description

In this manual: Power Control System - System Description
General Information — 8Engine :: Engine Mechanical — 19Engine Lubrication System - Precautions. Preparation — 1Engine Lubrication System - Lubrication System (System Description). Engine Oil Pressure (Basic Inspection). Service Data and Specifications (SDS) — 1Engine Cooling System - Precautions. Preparation. Service Data and Specifications (SDS) — 1Engine Cooling System - Engine Coolant — 1Engine Control System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1Engine Control System - Ecu Diagnosis Information — 1Ecu Diagnosis Information - Ecm ++ — 1Engine Control System - Basic Inspection — 1Basic Inspection - Diagnosis and Repair Workflow ++ — 1Basic Inspection - Basic Inspection ++ — 1Basic Inspection - Additional Service When Replacing Ecm ++ — 1Basic Inspection - Fuel Pressure Check ++ — 1Basic Inspection - How to Set Srt Code ++ — 1Basic Inspection - How to Erase Permanent Dtc ++ — 1Engine Control System - Dtc/circuit Diagnosis — 1Engine Control System - Symptom Diagnosis — 1Engine Control System - Periodic Maintenance — 1Engine Control System - Removal and Installation — 1Fuel System - Precautions. Preparation. Service Data and Specifications (SDS) — 1Fuel System - Fuel System (Periodic Maintenance). Fuel Level Sensor Unit (Disassembly and Assembly) — 1Exhaust System - Precautions. Preparation — 1Exhaust System - Exhaust System (Periodic Maintenance). Exhaust System (Removal and Installation) — 1Starting System - Precautions. Preparation. Starter Motor (Service Data and Specifications (sds)) — 1Starting System - Diagnosis and Repair Work Flow — 1Starting System - Starting System (Symptom Diagnosis). Starter Motor (Removal and Installation) — 1Accelerator Control System - Precautions. Service Data and Specifications (SDS) — 1Accelerator Control System - Accelerator Pedal Assembly — 1Transmission & Driveline :: Transaxle & Transmission — 21Driveline - System Description — 1Transfer: Ty92b - Ecu Diagnosis Information. Awd Control Unit ++ — 1Driveline - Basic Inspection — 1Driveline - Dtc/circuit Diagnosis — 1Driveline - Symptom Diagnosis — 1Driveline - Removal and Installation — 1Transfer: Ty92b - Unit Removal and Installation. Transfer Assembly ++ — 1Driveline - Unit Disassembly and Assembly — 1Driveline - Basic Inspection — 1Driveline - Removal and Installation — 1Driveline - Unit Disassembly and Assembly — 1Front Axle - Precautions. Preparation — 1Front Axle - Noise, Vibration and Harshness (nvh) Troubleshooting (Symptom Diagnosis). Service Data and Specifications (SDS) — 1Front Axle - Front Drive Shaft Boot — 1Front Axle - Front Drive Shaft — 1Rear Axle - Precautions. Preparation. Service Data and Specifications (SDS) — 1Rear Axle - Noise, Vibration and Harshness (nvh) Troubleshooting — 1Rear Axle - Rear Drive Shaft — 1Suspension :: Front Suspension — 7Rear Suspension - Precautions. Preparation — 1Rear Suspension - Noise, Vibration and Harshness (nvh) Troubleshooting (Symptom Diagnosis). Service Data and Specifications (SDS) — 1Rear Suspension - Rear Suspension Assembly — 1Road Wheels & Tires - Precautions — 1Road Wheels & Tires - Preparation. Bcm (Ecu Diagnosis Information). Service Data and Specifications (SDS) — 1Road Wheels & Tires - System — 1Brakes :: Brake System — 9Parking Brake System - Precautions. Preparation — 1Parking Brake System - System — 1Vdc/tcs/abs - Precautions ++ — 1Brake Control System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1Brake Control System - Basic Inspection — 1Brake Control System - Symptom Diagnosis — 1Brake Control System - Removal and Installation — 1Brake Control System - System Description — 1Brake Control System - Dtc/circuit Diagnosis — 1Brake Control System - Removal and Installation — 1Brake Control System - System Description — 1Brake Control System - Basic Inspection — 1Brake Control System - Symptom Diagnosis — 1Brake Control System - System Description — 1Brake Control System - Basic Inspection — 1Brake Control System - Symptom Diagnosis — 1Steering :: Steering System — 9Steering Control System - Precautions — 1Steering Control System - System — 1Steering Control System - Eps Control Unit (Ecu Diagnosis Information. Removal and Installation) — 1Restraints :: Seat Belt — 7Srs Air Bag - Precautions. Preparation — 1Srs Air Bag - Collision Diagnosis — 1Srs Air Bag - Occupant Classification System — 1Srs Air Bag Control System - Precautions — 1Srs Air Bag Control System - System — 1Srs Air Bag Control System - Diagnosis Sensor Unit — 1Srs Air Bag Control System - Inspection and Adjustment — 1Ventilation, Heater & Air Conditioner :: Ventilation System — 6Heater & Air Conditioning System - Precautions — 1Heater & Air Conditioning System - Preparation — 1Heater & Air Conditioning System - Component Parts — 1Heater & Air Conditioning System - Diagnosis and Repair Work Flow — 1Heater & Air Conditioning System - Compressor — 1Heater & Air Conditioning System - Cooler Pipe and Hose — 1Heater & Air Conditioning System - Condenser. Condenser — 1Heater & Air Conditioning System - Heating and Cooling Unit Assembly — 1Heater & Air Conditioning System - Service Data and Specifications (SDS) — 1Heater & Air Conditioning Control System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1System Description - Operation ++ — 1Heater & Air Conditioning Control System - Ecu Diagnosis Information — 1Heater & Air Conditioning Control System - Basic Inspection — 1Heater & Air Conditioning Control System - Dtc/circuit Diagnosis — 1Heater & Air Conditioning Control System - Symptom Diagnosis — 1Heater & Air Conditioning Control System - Removal and Installation — 1Body Interior :: Interior — 8Instrument Panel - Precautions. Preparation. Clip List — 1Instrument Panel - Squeak and Rattle Trouble Diagnoses — 1Instrument Panel - Cluster Lid C — 1Seat - Precautions — 1Seat - Preparation. Clip List — 1Seat - Component Parts — 1Seat - System — 1Seat - Diagnosis and Repair Work Flow — 1Seat - Front Seat — 1Seat - Second Row Seats — 1Seat - Third Row Seats — 1Seat - Front Seat — 1Seat - Second Row Seat — 1Seat - Third Row Seat — 1Automatic Drive Positioner - Precautions. Preparation — 1Automatic Drive Positioner - System — 1Automatic Drive Positioner - Diagnosis and Repair Work Flow — 1Automatic Drive Positioner - Inspection and Adjustment — 1Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock — 38Security Control System - Precautions — 1Security Control System - System — 1Security Control System - Ecm, Bcm, Intelligent Key Unit, Ipdm E/r — 1Security Control System - Vehicle Security System Cannot Be Set — 1Glass & Window System - Precautions. Preparation — 1Glass & Window System - Squeak and Rattle Trouble Diagnoses — 1Power Window Control System - Precautions. Preparation — 1Power Window Control System - Power Supply and Ground Circuit — 1Power Window Control System - Power Window Motor Circuit — 1Power Window Control System - Front Power Window Rh Alone Does Not Operate — 1Power Window Control System - Rear Lh Side Power Window Alone Does Not Operate — 1Power Window Control System - Rear Rh Side Power Window Alone Does Not Operate — 1Roof - Precautions. Preparation — 1Roof - Power Supply and Ground Circuit — 1Roof - Moonroof Switch Assembly — 1Roof - Lin Communication Circuit — 1Roof - Auto Operation Does Not Operate — 1Roof - Anti-Pinch Function Does Not Operate — 1Exterior - Precautions. Preparation. Clip List (Preparation) — 1Exterior - Squeak and Rattle Trouble Diagnoses — 1Exterior - Fender Protector — 1Exterior - Over Fender — 1Exterior - Under Cover — 1Exterior - Roof Side Rail — 1Body Repair - Service Information — 1Service Information - Sheet Metal Work ++ — 1Service Information - Body Welding and Precautions ++ — 1Service Information - Safety and Health ++ — 1Service Information - Repairing Procedures and Precautions ++ — 1Body Repair - Precaution — 1Body Repair - Preparation — 1Body Repair - Removal and Installation — 1Driver Controls :: Mirrors — 8Exterior Lighting System - System Description — 1System Description - Component Parts ++ — 1Exterior Lighting System - Basic Inspection — 1Exterior Lighting System - Dtc/circuit Diagnosis — 1Exterior Lighting System - Symptom Diagnosis — 1Exterior Lighting System - Periodic Maintenance — 1Exterior Lighting System - Removal and Installation — 1Interior Lighting System - Precautions. Preparation — 1Interior Lighting System - Component Parts. Interior Lighting System — 1Interior Lighting System - System — 1Interior Lighting System - Diagnosis and Repair Work Flow — 1Interior Lighting System - Interior Lighting System Symptoms (Symptom Diagnosis). Bcm (Ecu Diagnosis Information). Service Data and Specifications (SDS) — 1Interior Lighting System - Foot Lamp — 1Wiper & Washer - Precautions — 1Wiper & Washer - Preparation. Bcm, Ipdm E/r (Ecu Diagnosis Information). Service Data and Specifications (SDS) — 1Wiper & Washer - System — 1Wiper & Washer - Diagnosis and Repair Work Flow — 1Defogger - Precautions. Bcm, A/c Auto Amp. (Ecu Diagnosis Information) — 1Defogger - Diagnosis and Repair Work Flow — 1Horn - Precautions — 1Electrical & Power Control :: Power Outlet — 13Body Control System - Precautions. Preparation — 1Body Control System - Component Parts — 1Body Control System - System — 1Body Control System - Diagnosis System (bcm) — 1Body Control System - Bcm — 1Lan System - System Description — 1Lan System - System Description — 1Lan System - Dtc/circuit Diagnosis — 1Lan System - System Description — 1Lan System - Dtc/circuit Diagnosis — 1Power Control System - System Description — 1Power Control System - Basic Inspection — 1Power Control System - Dtc/circuit Diagnosis — 1Power Control System - System Description — 1Power Control System - Basic Inspection — 1Power Control System - Dtc/circuit Diagnosis — 1Power Control System - Removal and Installation — 1Charging System - Precautions. Preparation. Ecm, Ipdm E/r (Ecu Diagnosis Information) — 1Charging System - Diagnosis and Repair Work Flow — 1Charging System - Charging System (Symptom Diagnosis). Generator (Removal and Installation). Service Data and Specifications (SDS) — 1Power Supply, Ground & Circuit Elements - Precautions. Preparation. Service Data and Specifications (SDS) — 1Driver Information & Multimedia :: Meter, Warning Lamp & Indicator — 25Warning Chime System - Application Notice (How to Use This Manual). Precautions — 1Warning Chime System - System — 1Warning Chime System - Diagnosis System (combination Meter) — 1Warning Chime System - Bcm, Combination Meter (Ecu Diagnosis Information). Diagnosis and Repair Work Flow (Basic Inspection) — 1Sonar System - Precautions. Preparation — 1Sonar System - Sonar Control Unit — 1Dtc/circuit Diagnosis - B2720 Corner Sensor [rl] ++ — 1Audio, Visual & Navigation System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1Audio, Visual & Navigation System - Ecu Diagnosis Information — 1Audio, Visual & Navigation System - Basic Inspection — 1Audio, Visual & Navigation System - Dtc/circuit Diagnosis — 1Dtc/circuit Diagnosis - Multi Av (av Control Unit) ++ — 1Audio, Visual & Navigation System - Symptom Diagnosis — 1Symptom Diagnosis - Multi Av System ++ — 1Audio, Visual & Navigation System - Removal and Installation — 1Audio, Visual & Navigation System - System Description — 1Audio, Visual & Navigation System - Ecu Diagnosis Information — 1Audio, Visual & Navigation System - Basic Inspection — 1Audio, Visual & Navigation System - Dtc/circuit Diagnosis — 1Audio, Visual & Navigation System - Symptom Diagnosis — 1Audio, Visual & Navigation System - Removal and Installation — 1Audio, Visual & Navigation System - System Description — 1Audio, Visual & Navigation System - Basic Inspection — 1Audio, Visual & Navigation System - Dtc/circuit Diagnosis — 1Audio, Visual & Navigation System - Symptom Diagnosis — 1Audio, Visual & Navigation System - Removal and Installation — 1Audio, Visual & Navigation System - System Description — 1Audio, Visual & Navigation System - Basic Inspection — 1Audio, Visual & Navigation System - Dtc/circuit Diagnosis — 1Audio, Visual & Navigation System - Symptom Diagnosis — 1Audio, Visual & Navigation System - Removal and Installation — 1Cruise Control & Driver Assistance :: Cruise Control System — 17Driver Assistance System - System Description — 1Driver Assistance System - Basic Inspection — 1Driver Assistance System - Dtc/circuit Diagnosis — 1Driver Assistance System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1System Description - Operation ++ — 1System Description - Handling Precaution ++ — 1Driver Assistance System - Ecu Diagnosis Information — 1Driver Assistance System - Basic Inspection — 1Basic Inspection - Distance Sensor Alignment ++ — 1Basic Inspection - Camera Aiming Adjustment ++ — 1Basic Inspection - Action Test ++ — 1Driver Assistance System - Dtc/circuit Diagnosis — 1Dtc/circuit Diagnosis - Laser/radar (distance Sensor) ++ — 1Dtc/circuit Diagnosis - Lane Camera (front Camera Unit) ++ — 1Driver Assistance System - Symptom Diagnosis — 1Driver Assistance System - Removal and Installation — 1Driver Assistance System - System Description — 1System Description - System ++ — 1Driver Assistance System - Basic Inspection — 1Driver Assistance System - Dtc/circuit Diagnosis — 1Drive Mode System - Precautions — 1Drive Mode System - Component Parts. Drive Mode System — 1Drive Mode System - System — 1Drive Mode System - Diagnosis and Repair Work Flow — 1Drive Mode System - Drive Mode Select Switch Circuit — 1Maintenance - Precautions. Preparation — 1Maintenance - General Maintenance — 1Maintenance - Periodic Maintenance — 1Maintenance - Recommended Fluids and Lubricants — 1Maintenance - Engine Maintenance — 1Maintenance - Chassis and Body Maintenance — 1Engine Lubrication System - Periodic Maintenance — 1Engine Lubrication System - Removal and Installation — 1Engine Cooling System - System Description — 1Engine Cooling System - Removal and Installation — 1Engine Control System - Vq35dd — 1Fuel System - Removal and Installation — 1Starting System - System Description — 1Starting System - Dtc/circuit Diagnosis — 1Driveline - Transfer: Ty92b — 1Driveline - Rear Propeller Shaft: 3fcj-Cvj — 1Driveline - Rear Final Drive: R145 — 1Front Axle - Periodic Maintenance — 1Front Axle - Removal and Installation — 1Rear Axle - Periodic Maintenance — 1Rear Axle - Removal and Installation — 1Rear Suspension - Removal and Installation — 1Road Wheels & Tires - System Description — 1Road Wheels & Tires - Basic Inspection — 1Road Wheels & Tires - Dtc/circuit Diagnosis — 1Road Wheels & Tires - Symptom Diagnosis — 1Road Wheels & Tires - Periodic Maintenance — 1Road Wheels & Tires - Removal and Installation — 1Parking Brake System - System Description — 1Parking Brake System - Basic Inspection — 1Parking Brake System - Dtc/circuit Diagnosis — 1Parking Brake System - Symptom Diagnosis — 1Parking Brake System - Removal and Installation — 1Brake Control System - Vdc/tcs/abs — 1Brake Control System - Automatic Brake Hold — 1Brake Control System - Automatic Emergency Braking — 1Brake Control System - Rear Automatic Braking — 1Steering Control System - System Description — 1Steering Control System - Basic Inspection — 1Steering Control System - Dtc/circuit Diagnosis — 1Steering Control System - Symptom Diagnosis — 1Srs Air Bag - Removal and Installation — 1Srs Air Bag Control System - System Description — 1Srs Air Bag Control System - Basic Inspection — 1Srs Air Bag Control System - Symptom Diagnosis — 1Heater & Air Conditioning System - Symptom Diagnosis — 1Heater & Air Conditioning System - Periodic Maintenance — 1Heater & Air Conditioning Control System - Automatic Air Conditioning — 1Instrument Panel - Removal and Installation — 1Instrument Panel - Unit Disassembly and Assembly — 1Seat - Ecu Diagnosis Information — 1Seat - Dtc/circuit Diagnosis — 1Seat - Symptom Diagnosis — 1Automatic Drive Positioner - System Description — 1Automatic Drive Positioner - Ecu Diagnosis Information — 1Automatic Drive Positioner - Dtc/circuit Diagnosis — 1Automatic Drive Positioner - Symptom Diagnosis — 1Automatic Drive Positioner - Removal and Installation — 1Security Control System - System Description — 1Security Control System - Basic Inspection — 1Security Control System - Dtc/circuit Diagnosis — 1Security Control System - Symptom Diagnosis — 1Security Control System - Removal and Installation — 1Glass & Window System - Removal and Installation — 1Power Window Control System - System Description — 1Power Window Control System - Ecu Diagnosis Information — 1Power Window Control System - Basic Inspection — 1Power Window Control System - Dtc/circuit Diagnosis — 1Power Window Control System - Symptom Diagnosis — 1Power Window Control System - Removal and Installation — 1Roof - System Description — 1Roof - Ecu Diagnosis Information — 1Roof - Basic Inspection — 1Roof - Dtc/circuit Diagnosis — 1Roof - Symptom Diagnosis — 1Roof - Removal and Installation — 1Exterior - System Description — 1Exterior - Removal and Installation — 1Body Repair - Repair Information — 1Exterior Lighting System - Led Headlamp — 1Interior Lighting System - Dtc/circuit Diagnosis — 1Interior Lighting System - Removal and Installation — 1Wiper & Washer - System Description — 1Wiper & Washer - Dtc/circuit Diagnosis — 1Wiper & Washer - Symptom Diagnosis — 1Wiper & Washer - Removal and Installation — 1Defogger - System Description — 1Defogger - Dtc/circuit Diagnosis — 1Defogger - Symptom Diagnosis — 1Defogger - Removal and Installation — 1Horn - Removal and Installation — 1Body Control System - Basic Inspection — 1Body Control System - Dtc/circuit Diagnosis — 1Body Control System - Symptom Diagnosis — 1Body Control System - Removal and Installation — 1Lan System - Can Fundamental — 1Lan System - Can — 1Lan System - Can Gateway — 1Power Control System - Ipdm E/r — 1Power Control System - Power Distribution System — 1Charging System - System Description — 1Charging System - Dtc/circuit Diagnosis — 1Power Supply, Ground & Circuit Elements - System Description — 1Power Supply, Ground & Circuit Elements - Basic Inspection — 1Power Supply, Ground & Circuit Elements - Removal and Installation — 1Warning Chime System - System Description — 1Warning Chime System - Dtc/circuit Diagnosis — 1Warning Chime System - Symptom Diagnosis — 1Sonar System - System Description — 1Sonar System - Basic Inspection — 1Sonar System - Dtc/circuit Diagnosis — 1Sonar System - Symptom Diagnosis — 1Sonar System - Removal and Installation — 1Audio, Visual & Navigation System - Nissanconnect — 1Audio, Visual & Navigation System - Intelligent Around View Monitor System — 1Audio, Visual & Navigation System - Rear View Monitor System — 1Audio, Visual & Navigation System - Telematics System — 1Driver Assistance System - Adas Control Unit 2 — 1Driver Assistance System - Driver Assistance System — 1Driver Assistance System - Chassis Control — 1Drive Mode System - Removal and Installation — 1Dtc/circuit Diagnosis (C053c Wheel Speed Sensor ... U2141 Can Comm Circuit) — 1Dtc/circuit Diagnosis (P0011 Intake Valve Timing Control ... P0111 Iat Sensor) — 1Dtc/circuit Diagnosis (P0116 Engine Coolant Temperature Sensor ... P025b Fuel Pump Module a) — 1Dtc/circuit Diagnosis (P026b Injection Timing ... P0420 Three Way Catalyst Function) — 1Dtc/circuit Diagnosis (P0441 Evap Control System ... P0524 Engine Oil Pressure) — 1Dtc/circuit Diagnosis (P0532 A/c Refrigerant Pressure Sensor ... P064d Ecm) — 1Dtc/circuit Diagnosis (P06da Engine Oil Pressure Control Solenoid Valve ... P1217 Engine Over Temperature) — 1Dtc/circuit Diagnosis (P1220 Fuel Pump Control Module (fpcm) ... P1574 Ascd Vehicle Speed Sensor) — 1Dtc/circuit Diagnosis (P1575 Brake Switch ... P2101 Electric Throttle Control Function) — 1Dtc/circuit Diagnosis (P2118 Throttle Control Motor ... P34ac Electric Intake Valve Timing Control Actuator) — 1Dtc/circuit Diagnosis (Active Grille Shutter ... High Pressure Fuel Pump) — 1Dtc/circuit Diagnosis (Ignition Signal ... Variable Induction Air System) — 14012 C1040 Emergency Brake — 14013 C106a Wheel Sensor — 14014 C1078-55 Not Configuration — 14015 C10b4-98 Overheat — 14016 B1001 Lap Pre-Tensioner Lh — 14017 B0001 Driver Air Bag Module — 14018 B100e Knee Air Bag Module Rh — 14019 B142x Collision Detection — 1Dtc/circuit Diagnosis (B20c7-11 A/c Clutch ... B24a6-11 in-Vehicle Sensor) — 1Dtc/circuit Diagnosis (B24a6-15 in-Vehicle Sensor ... U2140-87 Can Comm Err (ecm)) — 1Dtc/circuit Diagnosis (C1f00-1c Control Unit ... C1f04-61 Brake Sw/stop Lamp Sw) — 1Dtc/circuit Diagnosis (C1f05-49 Front Camera Unit ... C1f70-87 Ethernet Circuit) — 1
~19min read
  • Component Parts
  • System
  • Diagnosis System (bcm)
  • Diagnosis System (ipdm E/r)
  • Diagnosis System (intelligent Key Unit)

Component Parts Nissan Pathfinder SUV

Power Distribution System

Component Parts Location

A. Instrument panel assembly B. Fuse block (J/B) [view with fuse block (J/B) removed] C. Brake pedal assembly (view with brake pedal assembly removed)
No.ComponentFunction
1. Rear door lock assembly RH (door switch)

Transmits the door switch signal to the BCM.

Refer to Door Lock Assembly for detailed component location.
2. Rear door request switch RH (if equipped)

Transmits the door request switch signal to the Intelligent Key unit.

Refer to Door Request Switch for detailed component location.
3. Front door lock assembly RH (door switch)

Transmits the door switch signal to the BCM.

Refer to Door Lock Assembly for detailed component location.
4. Front door request switch RH

Transmits the door request switch signal to the Intelligent Key unit.

Refer to Door Request Switch for detailed component location.
5. Electric shift control module

Transmits the shift position signal to the BCM via CAN communication.

Refer to Electric Shift Control Module for detailed component location.
6. Intelligent Key unit

The Intelligent Key Unit receives the push-button ignition switch input and transmits the signal to the BCM and IPDM E/R via CAN communication.

Refer to Intelligent Key Unit for detailed component location.
7. ABS (Anti-lock Braking System) actuator and electric unit (control unit)

Transmits the Nissan Pathfinder vehicle speed signal to the BCM via CAN communication.

Refer to ABS Actuator and Electric Unit (Control Unit) for detailed component location.
8.

TCM

(Transmission Control Module)

The TCM transmits P (park) and N (neutral) signals to the BCM via CAN communication.

Refer to TCM for detailed component location.
9.

IPDM E/R

(Intelligent Power Distribution Module Engine Room)

The IPDM E/R receives ignition relay (IPDM E/R) control signal and push-button ignition switch ON signal from the Intelligent Key unit via CAN communication, and controls the ignition relay (built into IPDM E/R).

Refer to System Description.
10. Ignition relay-3
  • The ignition relay-3 is controlled by the BCM.

  • The ignition relay-3 supplies push-button ignition switch ON power supply or push-button ignition switch ON signal to each ECU and system when the push-button ignition switch is placed ON.

  • The BCM compares the status of the ignition relay-3 control signal and push-button ignition status judged by the push-button ignition switch.

  • The BCM monitors the ignition relay-3 operating status by the ignition relay-3 feedback signal.

11.

BCM

(Body Control Module)
  • The BCM controls the power distribution system.

  • The BCM judges the push-button ignition status and Nissan Pathfinder vehicle condition.

  • The BCM checks the push-button ignition status internally.

Refer to System Description.
12. Front power window motor LH

Transmits the front power window open/close signal to the BCM via LIN communication.

Refer to Front Power Window Motor LH for detailed component location.
13. Front door lock assembly LH (door switch)

Transmits the door switch signal to the BCM.

Refer to Door Lock Assembly for detailed component location.
14. Front door request switch LH

Transmits the door request switch signal to the Intelligent Key unit.

Refer to Door Request Switch for detailed component location.
15. Rear door lock assembly LH (door switch)

Transmits the door switch signal to the BCM.

Refer to Door Lock Assembly for detailed component location.
16. Rear door request switch LH (if equipped)

Transmits the door request switch signal to the Intelligent Key unit.

Refer to Door Request Switch for detailed component location.
17. Combination meter

Receives the ignition battery saver meter display signal from the BCM via CAN communication.

Refer to Combination Meter (full TFT meter) or Combination Meter (7 inch information display) for detailed component location.
18. Combination switch

Transmits the combination switch signal to the BCM.

Refer to System Description.
19. Push-button ignition switch Refer to Push-Button Ignition Switch.
20.

Ignition relay-1

[in fuse block (J/B)]
  • The ignition relay-1 is controlled by the BCM.

  • The ignition relay-1 supplies push-button ignition switch ON power supply or push-button ignition switch ON signal to each ECU and system when the push-button ignition switch is ON.

  • The BCM compares the status of the ignition relay-1 control signal and push-button ignition status judged by the push-button ignition switch.

  • The BCM monitors the ignition relay-1 operating status by the ignition relay-1 feedback signal.

21.

Accessory relay

[in fuse block (J/B)]
  • The accessory relay is controlled by the BCM.

  • The accessory relay supplies accessory power supply or push-button ignition switch ON signal to each ECU when push-button ignition switch is ON.

  • The BCM compares the status of the accessory relay control signal, and the push-button ignition status judged by the push-button ignition switch.

22.

Ignition relay-2

[in fuse block (J/B)]
  • The ignition relay-2 is controlled by the BCM.

  • The ignition relay-2 supplies push-button ignition switch ON power supply or push-button ignition switch ON signal to each ECU and system when the push-button ignition switch is ON.

  • The BCM compares the status of the ignition relay-2 control signal and push-button ignition status judged by the push-button ignition switch.

  • The BCM monitors the ignition relay-2 operating status by the ignition relay-3 feedback signal.

23. Brake pedal position switch

The brake pedal position switch detects that the brake pedal is depressed and transmits the signal to the BCM.

Refer to Brake Pedal Position Switch for detailed component location.
24. Stop lamp switch

The stop lamp switch detects that the brake pedal is depressed and transmits the signal to the BCM.

Refer to Stop Lamp Switch for detailed component location.

Push-Button Ignition Switch

  • The push-button ignition switch is installed in the center of the instrument panel.

  • When the push-button ignition switch is pressed it transmits the status signal to the Intelligent Key unit.

System Nissan Pathfinder 2022

Power Distribution System

System Description

SYSTEM DIAGRAM

ComponentFunction
Intelligent Key Operates based on the results of electronic ID verification using two-way communication between the Intelligent Key and the Nissan Pathfinder vehicle (Intelligent Key unit).
Push-button ignition switch Refer to Push-Button Ignition Switch.
Stop lamp switch Stop lamp switch detects that brake pedal is depressed, and then transmits ON/OFF signal to BCM.
Brake pedal position switch Brake pedal position switch detects that brake pedal is depressed, and then transmits ON/OFF signal to BCM.
TCM Transmits shift position signal and cranking enable signal to BCM via CAN communication.
Electric shift control module Transmits the P/N position signal to the BCM via CAN communication.
Intelligent Key unit Transmits push-button ignition switch status signal and remote engine start signal to BCM via CAN communication.
ABS actuator and electric unit (control unit) Transmits Nissan Pathfinder vehicle speed signal to BCM via CAN communication.
BCM
  • BCM controls the each relay, judged from each switch status.

  • BCM transmits the push-button ignition switch ON signal to IPDM E/R via CAN communication, judged from each switch status.

  • BCM transmits the meter display signal to combination meter via CAN communication.

Combination meter Combination meter turns the ignition battery saver operation notice/operation confirmation ON according to the request from BCM via CAN communication.
Ignition relay-1 [Fuse block (J/B)] Controlled by BCM and turns ON/OFF the battery power supply to each parts.
Ignition relay-2 [Fuse block (J/B)]
Ignition relay-3
Accessory relay [Fuse block (J/B)]
IPDM E/R IPDM E/R controls the integrated ignition relay, and supplies voltage to the load according to the request from BCM via CAN communication.

Signal transmission function list

Signal nameInputOutputDescription
Stop lamp switch signal Stop lamp switch BCM Transmits the stop lamp switch signal to the BCM.
Brake pedal position switch signal Brake pedal position switch BCM Transmits the brake pedal position switch signal to the BCM.
Push-button ignition switch signal Push-button ignition switch Intelligent Key unit Transmits the push-button ignition switch signal to the Intelligent Key unit.
P/N position signal Electric shift control module BCM (CAN) Transmits the P/N position signal via CAN communication.
Shift position signal TCM BCM (CAN) Transmits the shift position signal via CAN communication.
Cranking enable signal TCM BCM (CAN) Transmits the cranking enable signal via CAN communication.
Remote engine start signal Intelligent Key unit BCM (CAN) Transmits the remote engine start signal via CAN communication.
Push-button ignition switch status signal Intelligent Key unit BCM (CAN) Transmits the push-button ignition switch status signal via CAN communication.
Nissan Pathfinder Vehicle speed signal ABS actuator and electric unit (control unit) BCM (CAN) Transmits the Nissan Pathfinder vehicle speed signal via CAN communication.
Push-button ignition switch ON signal BCM IPDM E/R (CAN) Transmits the push-button ignition switch ON signal via CAN communication.
Meter display signal BCM Combination meter (CAN) Transmits the meter display signal via CAN communication.

SYSTEM DESCRIPTION

  • The POWER DISTRIBUTION SYSTEM (PDS) is the system that the BCM controls with the operation of the push-button ignition switch and performs the power distribution to each power circuit. This system is used instead of the mechanical power supply changing mechanism with the operation of the conventional key cylinder.

    Allocation to the accessory power supply, refer to the auto ACC function. Refer to System Description.

  • The push-button ignition switch can be operated when the Intelligent Key is in the following conditions:

    • Intelligent Key is in the detection area of the inside key antenna.

    • Intelligent Key backside is contacted to push-button ignition switch.

  • Push-button ignition switch operation is an input to the Intelligent Key unit as a signal. The Intelligent Key unit transmits the push-button ignition switch status and remote engine start signal to the BCM via CAN communication. The BCM changes the push-button ignition switch mode according to the status and operates the following relays to supply power to each power circuit:

    • Ignition relay (IPDM E/R)

    • Ignition relay-1 [Fuse block(J/B)]

    • Ignition relay-2 [Fuse block(J/B)]

    • Ignition relay-3

    • Accessory relay -1 [Fuse block(J/B)]

IGNITION BATTERY SAVER SYSTEM

The ignition battery saver system is a system in which the BCM automatically shuts off the power supply (push-button ignition switch ON -> OFF) to protect the battery.

The BCM activates the ignition battery saver system 10 minutes after the ignition battery saver timer function operating conditions are met. Also, the meter display signal is transmitted to the combination meter via CAN communication as operation notice and operation confirmation, and the information display is operated.

Operating Condition of Ignition Battery Saver Timer Function

When all the following conditions are met for 10 minutes, the battery saver system will cut off the power supply (push-button ignition switch ON -> OFF) to prevent battery discharge:

  • Push-button ignition switch is ON

  • Engine stopped

Cancel Condition of Ignition Battery Saver Timer Function

If any of the following conditions are met the battery saver timer function is canceled:

CONSULT

  • Push-button ignition switch is not ON.

  • Engine running

  • Select "Diagnosis (ALL system)" of "BCM"

Operation Notice Function (7 Minutes have Passed Since the Timer was Activated)

7 minutes after ignition battery saver timer is activated, information display (message display) is activated as and operation notice.

Combination meter

(Information display)
Operation "Power will turn off to save the battery"
Operating time Approx. 3 minutes

Operation Confirmation Function (10 Minutes have Passed Since the Timer was Activated)

10 minutes after ignition battery saver timer is activated, information display (message display) is activated as and operation confirmation.

Combination meter

(Information display)
Operation "Power turned off to save the battery"
Operating time Approx. 1 minutes

Temporarily Disabling the Ignition Battery Saver System

The ignition battery saver system can be temporarily disabled, without using CONSULT, to prevent it from functioning when performing trouble diagnosis. Refer to Diagnosis Procedure.

POWER SUPPLY POSITION CHANGE TABLE BY PUSH-BUTTON IGNITION SWITCH OPERATION

The power supply position changing operation can be performed with the following operations:

Vehicle speed: less than 4 km/h

Power supply positionEngine start/stop conditionPush-button ignition switch operation frequency
Shift selector positionBrake pedal operation condition
OFF → ACC — Not depressed 1
OFF → ACC → ON — Not depressed 2
OFF → ACC → ON → OFF — Not depressed 3

OFF → START

ACC → START

ON → START
P or N position Depressed 1
Engine is running → OFF — — 1

Vehicle speed: 4 km/h or more

Power supply positionEngine start/stop conditionPush-button ignition switch operation frequency
Shift selector positionBrake pedal operation condition
Engine is running → ACC — — Emergency stop operation
Engine stall return operation while driving N position Not depressed 1

Emergency stop operation

  • Press and hold the push-button ignition switch for 2 seconds or more.

  • Press the push-button ignition switch 3 times or more within 1.5 seconds.

Auto Acc Function

System Description

SYSTEM DIAGRAM

ComponentFunction
Intelligent Key Operates based on the results of electronic ID verification using two-way communication between the Intelligent Key and the Nissan Pathfinder vehicle (Intelligent Key unit).
Each door request switch Detects door lock/unlock operation.
Push-button ignition switch Refer to Push-Button Ignition Switch.
Each door switch Detects door open/close condition.
Combination switch Inputs the each switch condition signal to BCM.
Front power window motor LH Transmits front power window open/close signal to BCM via LIN communication.
Intelligent Key unit Transmits push-button ignition switch status signal and door lock/unlock request signal to BCM via CAN communication.
ABS actuator and electric unit (control unit) Transmits Nissan Pathfinder vehicle speed signal to the BCM via CAN communication.
TCU Transmits auto ACC request signal to BCM via CAN communication.
BCM BCM operates the auto ACC function based on each signal state.
Accessory relay Controlled by the BCM and turns ON/OFF the battery power supply to each parts.
Audio/Navigation
  • Transmits auto ACC request signal to BCM via CAN communication.

  • Auto ACC status signal receives from BCM via CAN communication.

Signal transmission function list

Signal nameInputOutputDescription
Door request switch signal Each door request switch Intelligent Key unit Transmits the door request switch signal to the Intelligent Key unit.
Push-button ignition switch signal Push-button ignition switch Intelligent Key unit Transmits the push-button ignition switch signal to the Intelligent Key unit.
Door switch signal Each door switch BCM Transmits the door switch signal to the BCM.
Combination switch signal Combination switch BCM Transmits the combination switch signal to the BCM.
Front power window open/close signal Front power window motor LH BCM (LIN) Transmits the front power window open/close signal via LIN communication.
Push-button ignition switch status signal Intelligent Key unit BCM (CAN) Transmits the push-button ignition switch status signal via CAN communication.
Door lock/unlock request signal Intelligent Key unit BCM (CAN) Transmits the door lock/unlock request signal via CAN communication.
Auto ACC request signal
  • Audio/Navigation

  • TCU

BCM (CAN) Transmits the auto ACC request signal via CAN communication.
Auto ACC status signal BCM Audio/Navigation (CAN) Transmits the auto ACC status signal via CAN communication.
Nissan Pathfinder Vehicle speed signal ABS actuator and electric unit (control unit) BCM (CAN) Transmits the Nissan Pathfinder vehicle speed signal via CAN communication.

SYSTEM DESCRIPTION

In conventional vehicles, power is supplied to the accessories of the vehicle after the push-button ignition switch is placed to ACC.

The AUTO ACC function is a function that bypasses the push-button ignition switch ACC mode and automatically distributes accessory power supply to each switch and unit based on door unlock operation, etc. using the Intelligent Key.

OPERATION FLOW

Push-button ignition switch ON state

In this status the push-button ignition switch is operated and placed ON.

Audio/Navigation use possible state

  • In this status the audio/navigation, and each switch and unit that is activated by the accessory power supply can be operated.

  • When 10 minutes pass after conditions are satisfied while audio/navigation are not operated, audio/navigation turns OFF.

Audio/Navigation preparation state

  • In this status audio/navigation are stopped, but the switches and units other than those for audio/navigation that can operate by using the accessory power supply are available until the accessory power supply turns OFF.

  • When audio/navigation is operated within 1 minutes after conditions are satisfied, operation time is extended for 10 minutes. Audio/navigation can be operated for a maximum of 30 minutes after the status is satisfied.

Function OFF state

In this status the AUTO ACC function stops and power to the accessories is not supplied.

No.Function statusShifting conditionAccessory power supply
Shifting from “Function OFF state” to "Push-button ignition switch ON state"

Any of the following conditions are satisfied:

  • Push-button ignition switch ON from OFF.

  • Operate push-button ignition switch and start the engine.

  • Operate REMOTE ENGINE START button of Intelligent Key and start the engine.

OFF –> ON
Shifting from “Audio/Navigation preparation state” to “Push-button ignition switch ON state” ON
Shifting from “Audio/Navigation use possible state” to “Push-button ignition switch ON state” ON
Shifting from “Function OFF state” to “Audio/Navigation preparation state”

Any of the following conditions are satisfied:

  • Each door is opened or closed.

  • Close all doors and back door, and lock all doors with the Intelligent Key or door request switch.

  • Operate either the door request switch or the unlock button of the Intelligent Key to unlock the door.

  • Operate lighting switch and turn ON the tail lamp.

OFF –> ON
Shifting from “Audio/Navigation preparation state” to “Audio/Navigation use possible state” Operate audio/navigation. ON
Shifting from “Push-button ignition switch ON state” to “Audio/Navigation use possible state” Push-button ignition switch OFF from ON while front door LH is closed with Nissan Pathfinder vehicle speed is less than 3 km/h. ON
Shifting from “Push-button ignition switch ON state” to “Audio/Navigation preparation state” Push-button ignition switch OFF from ON while front door LH is open with Nissan Pathfinder vehicle speed is less than 3 km/h. ON
Shifting from “Audio/Navigation use possible state” to “Audio/Navigation preparation state”

Any of the following conditions are satisfied:

  • Front door LH is opened.

  • Close all doors and back door, and lock all doors with the Intelligent Key or door request switch.

  • 10 minutes pass from “Audio/Navigation use possible state”.

ON
Shifting from “Audio/Navigation use possible state” to “Function OFF state” 30 minutes pass from “Audio/Navigation use possible state”. ON –> OFF
Shifting from “Audio/Navigation preparation state” to “Function OFF state” 1 minutes or 3 minutes pass from “Audio/Navigation preparation state”. ON –> OFF
Shifting from “Audio/Navigation use possible state” time extension (1 minute)

Any of the following conditions are satisfied:

  • Each door is opened or closed.

  • Close all doors and back door, and lock all doors with the Intelligent Key or door request switch.

  • Operate either the door request switch or the unlock button of the Intelligent Key to unlock the door.

  • Operate lighting switch and turn ON the tail lamp.

  • Operate power window switch and open/close the power window.

ON
Shifting from “Push-button ignition switch ON state” (in status of emergency stop) to “Audio/Navigation use possible state” Nissan Pathfinder Vehicle speed is less than 3 km/h and except front door LH is opened. ON
Shifting from “Push-button ignition switch ON state” (in status of emergency stop) to “Audio/Navigation preparation state” Nissan Pathfinder Vehicle speed is less than 3 km/h and front door LH is opened. ON
Shifting from “Push-button ignition switch ON state” (in status of temporarily disabling the ignition battery saver) to “Audio/Navigation use possible state”

Press and hold the push-button ignition switch continuously for 3 seconds or more when all of the following conditions are satisfied:

  • Selector lever: Except P or N position

  • Brake pedal: Not depressed

  • Front door LH: Close

ON
Shifting from “Push-button ignition switch ON state” (in status of temporarily disabling the ignition battery save) to “Audio/Navigation preparation state”

Press and hold the push-button ignition switch continuously for 3 seconds or more when all of the following conditions are satisfied:

  • Shift selector: Except P or N position

  • Brake pedal: Not depressed

  • Front door LH: Open

ON

Diagnosis System (bcm) Nissan Pathfinder Fifth generation

Common Item

CONSULT Function (BCM - COMMON ITEM)

BCM Refer to CONSULT Function (BCM - COMMON ITEM).

Intelligent Key

CONSULT Function (BCM - INTELLIGENT KEY)

BCM Refer to CONSULT Function (BCM - INTELLIGENT KEY).

Diagnosis System (ipdm E/r) Nissan Pathfinder 2026

CONSULT Function (IPDM E/R)

IPDM E/R Refer to CONSULT Function (IPDM E/R).

Diagnosis System (intelligent Key Unit) Nissan Pathfinder 2022

CONSULT Function (HANDS FREE MODULE)

Intelligent Key unit Refer to CONSULT Function (HANDS FREE MODULE).