Seat - Front Seat
Exploded View
DRIVER SEAT – MANUAL 
| 1. | Headrest | 2. | Seatback trim | 3. | Seatback pad |
| 4. | Seat cushion inner finisher (RH) | 5. | Seat cushion outer finisher (RH) | 6. | Seat belt buckle |
| 7. | Seat cushion trim | 8. | Seat cushion pad | 9. | Front slide finisher (RH) |
| 10. | Seat harness | 11. | Front slide finisher (LH) | 12. | Side attachment bracket (RH) |
| 13. | Center attachment bracket | 14. | Side attachment bracket (LH) | 15. | Seat cushion side attachment |
| 16. | Seat cushion support | 17. | Lift lever finisher | 18. | Recline lever finisher |
| 19. | Seat cushion outer finisher (LH) | 20. | Seat cushion inner finisher (LH) | 21. | Lift lever |
| 22. | Seat cushion frame assembly | 23. | Lifter knob retainer | 24. | Recline lever |
| 25. | Lifter knob cap | 26. | Front side air bag module | 27. | Slide finisher outer |
| 28. | Slide finisher inner | 29. | Seat back frame assembly | 30. | Headrest holder (locked) |
| 31. | Headrest holder (free) | 32. | Rear slide finisher (LH) | 33. | Rear slide finisher (RH) |
| 34. | Seat lumbar assembly | A. | Refer to Removal and Installation. |
DRIVER SEAT – POWER WITHOUT CLIMATE CONTROL 
| 1. | Headrest | 2. | Seatback trim | 3. | Seatback pad |
| 4. | Seat cushion inner finisher (RH) | 5. | Seat cushion outer finisher (RH) | 6. | Seat belt buckle |
| 7. | Seat cushion trim | 8. | Seat cushion pad | 9. | Front slide finisher (RH) |
| 10. | Front slide finisher (LH) | 11. | Seat cushion heater (if equipped)] | 12. | Seat harness |
| 13. | Center attachment bracket | 14. | Side attachment bracket (RH) | 15. | Side attachment bracket (LH) |
| 16. | Power seat switch | 17. | Seat slide knob | 18. | Seat recline knob |
| 19. | Seat cushion inner finisher (LH) | 20. | Lumbar support switch | 21. | Seat cushion side attachment |
| 22. | Seat cushion support | 23. | Seat cushion frame assembly | 24. | Front side air bag module |
| 25. | Seat cushion inner finisher (LH) | 26. | Seat back frame assembly | 27. | Slide finisher outer |
| 28. | Slide finisher inner | 29. | Rear slide finisher (LH) | 30. | Rear slide finisher (RH) |
| 31. | Seat lumbar assembly | 32. | Headrest holder (locked) | 33. | Headrest holder (free) |
| 34. | Seat back heater (if equipped) | A. | Refer to Remove and Installation. |
DRIVER SEAT – POWER WITH CLIMATE CONTROL 
| 1. | Headrest | 2. | Seatback trim | 3. | Seatback pad |
| 4. | Front center air bag module | 5. | Seat belt buckle | 6. | Seat cushion outer finisher (RH) |
| 7. | Seat cushion inner finisher (RH) | 8. | Seat cushion trim | 9. | Seat cushion pad |
| 10. | Front slide finisher (RH) | 11. | Seat cushion heater | 12. | Front slide finisher (LH) |
| 13. | Seat cushion duct | 14. | Seat harness | 15. | Side attachment bracket (RH) |
| 16. | Center attachment bracket | 17. | Driver seat control unit (if equipped) | 18. | Side attachment bracket (LH) |
| 19. | Seat cushion blower | 20. | Seat cushion support | 21. | Seat cushion frame assembly |
| 22. | Seat cushion side attachment | 23. | Power seat switch | 24. | Seat cushion outer finisher (LH) |
| 25. | Seat slide knob | 26. | Seat recline knob | 27. | Lumbar support switch |
| 28. | Front side air bag module | 29. | Seat cushion inner finisher (LH) | 30. | Seat back frame assembly |
| 31. | Seat back blower | 32. | Slide finisher outer | 33. | Slide finisher inner |
| 34. | Rear slide finisher (LH) | 35. | Rear slide finisher (RH) | 36. | Seatback duct |
| 37. | Seat lumbar assembly | 38. | Headrest holder (locked) | 39. | Headrest holder (free) |
| 40. | Seat back heater | A. | Refer to Removal and Installation. |
PASSENGER SEAT – MANUAL 
| 1. | Headrest | 2. | Seatback trim | 3. | Seatback pad |
| 4. | Front side air bag module | 5. | Lifter knob cap | 6. | Recline lever |
| 7. | Lifter knob retainer | 8. | Seat cushion inner finisher (RH) | 9. | Seat cushion outer finisher (RH) |
| 10. | Recline lever finisher | 11. | Seat cushion frame assembly | 12. | Front slide finisher (RH) |
| 13. | Seat cushion trim | 14. | Seat cushion pad | 15. | Seat cushion heater (if equipped) |
| 16. | Front slide finisher (LH) | 17. | Occupant Classification Sensor harness | 18. | Seat harness |
| 19. | Side attachment bracket (RH) | 20. | Center attachment bracket | 21. | Occupant Classification System control unit |
| 22. | Side attachment bracket (LH) | 23. | Seat cushion inner finisher (LH) Occupant Classification System sensor | 24. | Seat cushion support |
| 25. | Seat belt buckle | 26. | Seat cushion outer finisher (LH) | 27. | Seat cushion inner finisher (LH) |
| 28. | Rear slide finisher (LH) | 29. | Rear slide finisher (RH) | 30. | Seat back frame assembly |
| 31. | Seat lumbar assembly | 32. | Headrest holder (locked) | 33. | Headrest holder (free) |
| 34. | Seat back heater (if equipped) | A. | Refer to Removal and Installation. |
PASSENGER SEAT – POWER WITHOUT CLIMATE CONTROL 
| 1. | Headrest | 2. | Seatback trim | 3. | Seatback pad |
| 4. | Front side air bag module | 5. | Seat cushion inner finisher (RH) | 6. | Seat cushion outer finisher (RH) |
| 7. | Seat recline knob | 8. | Seat slide knob | 9. | Power seat switch |
| 10. | Seat cushion trim | 11. | Seat cushion pad | 12. | Seat cushion heater |
| 13. | Front slide finisher (RH) | 14. | Front slide finisher (LH) | 15. | Occupant Classification Sensor harness |
| 16. | Seat harness | 17. | Side attachment bracket (RH) | 18. | Occupant Classification System control unit |
| 19. | Center attachment bracket | 20. | Side attachment bracket (LH) | 21. | Seat cushion support |
| 22. | Occupant Classification System sensor | 23. | Seat cushion frame assembly | 24. | Seat belt buckle |
| 25. | Seat cushion outer finisher (LH) | 26. | Seat cushion inner finisher (LH) | 27. | Seat back frame assembly |
| 28. | Rear slide finisher (LH) | 29. | Rear slide finisher (RH) | 30. | Headrest holder (locked) |
| 31. | Headrest holder (free) | 32. | Seat lumbar assembly | 33. | Seat back heater |
| A. | Refer to Removal and Installation. |
PASSENGER SEAT – POWER WITH CLIMATE CONTROL 
| 1. | Headrest | 2. | Seatback trim | 3. | Seatback pad |
| 4. | Front side air bag module | 5. | Seat cushion inner finisher (RH) | 6. | Seat cushion outer finisher (RH) |
| 7. | Seat recline knob | 8. | Seat slide knob | 9. | Power seat switch |
| 10. | Seat cushion trim | 11. | Seat cushion pad | 12. | Seat cushion heater |
| 13. | Seat cushion duct | 14. | Front slide finisher (RH) | 15. | Front slide finisher (LH) |
| 16. | Occupant Classification Sensor harness | 17. | Seat harness | 18. | Side attachment bracket (RH) |
| 19. | Occupant Classification System control unit | 20. | Center attachment bracket | 21. | Side attachment bracket (LH) |
| 22. | Seat cushion blower | 23. | Seat cushion support | 24. | Occupant Classification System sensor |
| 25. | Seat cushion frame assembly | 26. | Seat belt buckle | 27. | Seat cushion outer finisher (LH) |
| 28. | Seat cushion inner finisher (LH) | 29. | Seat back blower | 30. | Seat back frame assembly |
| 31. | Rear slide finisher (LH) | 32. | Rear slide finisher (RH) | 33. | Headrest holder (locked) |
| 34. | Headrest holder (free) | 35. | Seat lumbar assembly | 36. | Seatback duct |
| 37. | Seat back heater | A. | Refer to Removal and Installation. |
Removal and Installation
REMOVAL
Slide the seat to the full forward position.
Using a suitable tool, release pawls and remove the rear slide finisher [LH (1)] and [RH (2)].

| : Nissan Pathfinder Vehicle front | |
| : Pawl |

Remove the rear seat bolts.
Slide seat to the full rearward position.
Using a suitable tool, release pawls and remove the front slide finisher [RH (1)] and [LH (2)].

| : Nissan Pathfinder Vehicle front | |
| : Pawl |

| : Nissan Pathfinder Vehicle front |
Remove the front seat bolts.
Disconnect negative and positive battery terminals, then wait at least three minutes. Refer to Battery Disconnect.
Tilt the seat rearward and disconnect the harness connectors from the seat.
Remove the seat from the Nissan Pathfinder vehicle.
INSTALLATION
Installation is in the reverse order of removal.
When installing the front seat (LH), tighten the bolts to specification in the order shown.

Front seat (LH) bolt torque : 45 N·m When installing the front seat (RH), tighten the bolts to specification in the order shown.

Front seat (RH) bolt torque : 45 N·m
- Seat Back Blower
- Seat Cushion Blower
- Front Seat Heater
- Power Seat Switch
- Lumbar Support Switch
Seat Back Blower Nissan Pathfinder Fifth generation
Removal and Installation
REMOVAL
Remove the front seat. Refer to Removal and Installation.
Remove the seatback strap (A) from the seat frame assembly.

Using suitable tool, release the lower J-hooks (A).

| (C) | : Upper J-hooks |
Unzip the seatback zippers (B).
Unclip the seatback duct from the seat back blower.
Remove bolt (A) from the seat back blower motor (1).

Disconnect the harness connectors (B) from the seat back blower.
Release hooks (C) and position aside the seat back blower motor.
Using suitable tool, release the harness retainers from the seat back blower motor and remove the seatback blower motor.
INSTALLATION
Installation is in the reverse order of removal.
Seat Cushion Blower Nissan Pathfinder Fifth generation
Removal and Installation
REMOVAL
Remove the front seat. Refer to Removal and Installation.
Remove the seatback strap (A) from the seat frame assembly.

Disconnect harness connector from the driver seat control unit (if equipped).
Disconnect the harness connector (A) from the seat cushion blower (1).

| : Pawl |
Using a suitable tool, release seat back blower pawls and remove seat cushion blower motor.
INSTALLATION
Installation is in the reverse order of removal.
Front Seat Heater Nissan Pathfinder SUV
Removal and Installation
Seat Cushion Heater
REMOVAL
Remove seat cushion pad. Refer to Seat Cushion.
Carefully remove front seat heater from seat cushion pad.
INSTALLATION
Peel protective backing from front seat heater and attach to seat cushion pad.
Secure the front seat heater harness to the seat cushion frame.
Install the remaining seat cushion components. Refer to Seat Cushion.
Seat Back Heater
REMOVAL
Remove seatback pad. Refer to Seatback.
Carefully remove front seat heater from seatback pad.
INSTALLATION
Peel protective backing from front seat heater and attach to seatback pad.
Secure the front seat heater harness to the seatback frame.
Install the remaining seatback components. Refer to Seatback.
Power Seat Switch Nissan Pathfinder R53
Removal and Installation
REMOVAL
Remove the front seat. Refer to Removal and Installation.
Remove the seatback trim retainer straps (A).

Using suitable tool, release pawls and remove the seat slide knob (1) and the seat recline knob (2).

| : Pawl |
Using suitable tool, release pawls and clips, then reposition the seat cushion outer finisher [LH (1)] aside.

| : Metal clip | |
| : Pawl |
Remove screws (A) and release the power seat switch (1) from the seat cushion outer finisher [LH (2)].

Disconnect the harness connector from the power seat switch and remove.
INSTALLATION
Installation is in the reverse order of removal.
Lumbar Support Switch Nissan Pathfinder SUV
Removal and Installation
REMOVAL
Remove the front seat. Refer to Removal and Installation.
Remove the seatback trim retainer straps (A).

Using suitable tool, release pawls and clips, then reposition the seat cushion outer finisher (1) aside.

| : Metal clip | |
| : Pawl |
Disconnect the harness connector from the lumbar support switch.
Remove screws (A) and remove the lumbar support switch (1) from the seat cushion outer finisher (2).

INSTALLATION
Installation is in the reverse order of removal.