Wiper & Washer - System

In this manual: Wiper & Washer - System
General Information — 8Engine :: Engine Mechanical — 19Engine Lubrication System - Precautions. Preparation — 1Engine Lubrication System - Lubrication System (System Description). Engine Oil Pressure (Basic Inspection). Service Data and Specifications (SDS) — 1Engine Cooling System - Precautions. Preparation. Service Data and Specifications (SDS) — 1Engine Cooling System - Engine Coolant — 1Engine Control System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1Engine Control System - Ecu Diagnosis Information — 1Ecu Diagnosis Information - Ecm ++ — 1Engine Control System - Basic Inspection — 1Basic Inspection - Diagnosis and Repair Workflow ++ — 1Basic Inspection - Basic Inspection ++ — 1Basic Inspection - Additional Service When Replacing Ecm ++ — 1Basic Inspection - Fuel Pressure Check ++ — 1Basic Inspection - How to Set Srt Code ++ — 1Basic Inspection - How to Erase Permanent Dtc ++ — 1Engine Control System - Dtc/circuit Diagnosis — 1Engine Control System - Symptom Diagnosis — 1Engine Control System - Periodic Maintenance — 1Engine Control System - Removal and Installation — 1Fuel System - Precautions. Preparation. Service Data and Specifications (SDS) — 1Fuel System - Fuel System (Periodic Maintenance). Fuel Level Sensor Unit (Disassembly and Assembly) — 1Exhaust System - Precautions. Preparation — 1Exhaust System - Exhaust System (Periodic Maintenance). Exhaust System (Removal and Installation) — 1Starting System - Precautions. Preparation. Starter Motor (Service Data and Specifications (sds)) — 1Starting System - Diagnosis and Repair Work Flow — 1Starting System - Starting System (Symptom Diagnosis). Starter Motor (Removal and Installation) — 1Accelerator Control System - Precautions. Service Data and Specifications (SDS) — 1Accelerator Control System - Accelerator Pedal Assembly — 1Transmission & Driveline :: Transaxle & Transmission — 21Driveline - System Description — 1Transfer: Ty92b - Ecu Diagnosis Information. Awd Control Unit ++ — 1Driveline - Basic Inspection — 1Driveline - Dtc/circuit Diagnosis — 1Driveline - Symptom Diagnosis — 1Driveline - Removal and Installation — 1Transfer: Ty92b - Unit Removal and Installation. Transfer Assembly ++ — 1Driveline - Unit Disassembly and Assembly — 1Driveline - Basic Inspection — 1Driveline - Removal and Installation — 1Driveline - Unit Disassembly and Assembly — 1Front Axle - Precautions. Preparation — 1Front Axle - Noise, Vibration and Harshness (nvh) Troubleshooting (Symptom Diagnosis). Service Data and Specifications (SDS) — 1Front Axle - Front Drive Shaft Boot — 1Front Axle - Front Drive Shaft — 1Rear Axle - Precautions. Preparation. Service Data and Specifications (SDS) — 1Rear Axle - Noise, Vibration and Harshness (nvh) Troubleshooting — 1Rear Axle - Rear Drive Shaft — 1Suspension :: Front Suspension — 7Rear Suspension - Precautions. Preparation — 1Rear Suspension - Noise, Vibration and Harshness (nvh) Troubleshooting (Symptom Diagnosis). Service Data and Specifications (SDS) — 1Rear Suspension - Rear Suspension Assembly — 1Road Wheels & Tires - Precautions — 1Road Wheels & Tires - Preparation. Bcm (Ecu Diagnosis Information). Service Data and Specifications (SDS) — 1Road Wheels & Tires - System — 1Brakes :: Brake System — 9Parking Brake System - Precautions. Preparation — 1Parking Brake System - System — 1Vdc/tcs/abs - Precautions ++ — 1Brake Control System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1Brake Control System - Basic Inspection — 1Brake Control System - Symptom Diagnosis — 1Brake Control System - Removal and Installation — 1Brake Control System - System Description — 1Brake Control System - Dtc/circuit Diagnosis — 1Brake Control System - Removal and Installation — 1Brake Control System - System Description — 1Brake Control System - Basic Inspection — 1Brake Control System - Symptom Diagnosis — 1Brake Control System - System Description — 1Brake Control System - Basic Inspection — 1Brake Control System - Symptom Diagnosis — 1Steering :: Steering System — 9Steering Control System - Precautions — 1Steering Control System - System — 1Steering Control System - Eps Control Unit (Ecu Diagnosis Information. Removal and Installation) — 1Restraints :: Seat Belt — 7Srs Air Bag - Precautions. Preparation — 1Srs Air Bag - Collision Diagnosis — 1Srs Air Bag - Occupant Classification System — 1Srs Air Bag Control System - Precautions — 1Srs Air Bag Control System - System — 1Srs Air Bag Control System - Diagnosis Sensor Unit — 1Srs Air Bag Control System - Inspection and Adjustment — 1Ventilation, Heater & Air Conditioner :: Ventilation System — 6Heater & Air Conditioning System - Precautions — 1Heater & Air Conditioning System - Preparation — 1Heater & Air Conditioning System - Component Parts — 1Heater & Air Conditioning System - Diagnosis and Repair Work Flow — 1Heater & Air Conditioning System - Compressor — 1Heater & Air Conditioning System - Cooler Pipe and Hose — 1Heater & Air Conditioning System - Condenser. Condenser — 1Heater & Air Conditioning System - Heating and Cooling Unit Assembly — 1Heater & Air Conditioning System - Service Data and Specifications (SDS) — 1Heater & Air Conditioning Control System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1System Description - Operation ++ — 1Heater & Air Conditioning Control System - Ecu Diagnosis Information — 1Heater & Air Conditioning Control System - Basic Inspection — 1Heater & Air Conditioning Control System - Dtc/circuit Diagnosis — 1Heater & Air Conditioning Control System - Symptom Diagnosis — 1Heater & Air Conditioning Control System - Removal and Installation — 1Body Interior :: Interior — 8Instrument Panel - Precautions. Preparation. Clip List — 1Instrument Panel - Squeak and Rattle Trouble Diagnoses — 1Instrument Panel - Cluster Lid C — 1Seat - Precautions — 1Seat - Preparation. Clip List — 1Seat - Component Parts — 1Seat - System — 1Seat - Diagnosis and Repair Work Flow — 1Seat - Front Seat — 1Seat - Second Row Seats — 1Seat - Third Row Seats — 1Seat - Front Seat — 1Seat - Second Row Seat — 1Seat - Third Row Seat — 1Automatic Drive Positioner - Precautions. Preparation — 1Automatic Drive Positioner - System — 1Automatic Drive Positioner - Diagnosis and Repair Work Flow — 1Automatic Drive Positioner - Inspection and Adjustment — 1Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock — 38Security Control System - Precautions — 1Security Control System - System — 1Security Control System - Ecm, Bcm, Intelligent Key Unit, Ipdm E/r — 1Security Control System - Vehicle Security System Cannot Be Set — 1Glass & Window System - Precautions. Preparation — 1Glass & Window System - Squeak and Rattle Trouble Diagnoses — 1Power Window Control System - Precautions. Preparation — 1Power Window Control System - Power Supply and Ground Circuit — 1Power Window Control System - Power Window Motor Circuit — 1Power Window Control System - Front Power Window Rh Alone Does Not Operate — 1Power Window Control System - Rear Lh Side Power Window Alone Does Not Operate — 1Power Window Control System - Rear Rh Side Power Window Alone Does Not Operate — 1Roof - Precautions. Preparation — 1Roof - Power Supply and Ground Circuit — 1Roof - Moonroof Switch Assembly — 1Roof - Lin Communication Circuit — 1Roof - Auto Operation Does Not Operate — 1Roof - Anti-Pinch Function Does Not Operate — 1Exterior - Precautions. Preparation. Clip List (Preparation) — 1Exterior - Squeak and Rattle Trouble Diagnoses — 1Exterior - Fender Protector — 1Exterior - Over Fender — 1Exterior - Under Cover — 1Exterior - Roof Side Rail — 1Body Repair - Service Information — 1Service Information - Sheet Metal Work ++ — 1Service Information - Body Welding and Precautions ++ — 1Service Information - Safety and Health ++ — 1Service Information - Repairing Procedures and Precautions ++ — 1Body Repair - Precaution — 1Body Repair - Preparation — 1Body Repair - Removal and Installation — 1Driver Controls :: Mirrors — 8Exterior Lighting System - System Description — 1System Description - Component Parts ++ — 1Exterior Lighting System - Basic Inspection — 1Exterior Lighting System - Dtc/circuit Diagnosis — 1Exterior Lighting System - Symptom Diagnosis — 1Exterior Lighting System - Periodic Maintenance — 1Exterior Lighting System - Removal and Installation — 1Interior Lighting System - Precautions. Preparation — 1Interior Lighting System - Component Parts. Interior Lighting System — 1Interior Lighting System - System — 1Interior Lighting System - Diagnosis and Repair Work Flow — 1Interior Lighting System - Interior Lighting System Symptoms (Symptom Diagnosis). Bcm (Ecu Diagnosis Information). Service Data and Specifications (SDS) — 1Interior Lighting System - Foot Lamp — 1Wiper & Washer - Precautions — 1Wiper & Washer - Preparation. Bcm, Ipdm E/r (Ecu Diagnosis Information). Service Data and Specifications (SDS) — 1Wiper & Washer - System — 1Wiper & Washer - Diagnosis and Repair Work Flow — 1Defogger - Precautions. Bcm, A/c Auto Amp. (Ecu Diagnosis Information) — 1Defogger - Diagnosis and Repair Work Flow — 1Horn - Precautions — 1Electrical & Power Control :: Power Outlet — 13Body Control System - Precautions. Preparation — 1Body Control System - Component Parts — 1Body Control System - System — 1Body Control System - Diagnosis System (bcm) — 1Body Control System - Bcm — 1Lan System - System Description — 1Lan System - System Description — 1Lan System - Dtc/circuit Diagnosis — 1Lan System - System Description — 1Lan System - Dtc/circuit Diagnosis — 1Power Control System - System Description — 1Power Control System - Basic Inspection — 1Power Control System - Dtc/circuit Diagnosis — 1Power Control System - System Description — 1Power Control System - Basic Inspection — 1Power Control System - Dtc/circuit Diagnosis — 1Power Control System - Removal and Installation — 1Charging System - Precautions. Preparation. Ecm, Ipdm E/r (Ecu Diagnosis Information) — 1Charging System - Diagnosis and Repair Work Flow — 1Charging System - Charging System (Symptom Diagnosis). Generator (Removal and Installation). Service Data and Specifications (SDS) — 1Power Supply, Ground & Circuit Elements - Precautions. Preparation. Service Data and Specifications (SDS) — 1Driver Information & Multimedia :: Meter, Warning Lamp & Indicator — 25Warning Chime System - Application Notice (How to Use This Manual). Precautions — 1Warning Chime System - System — 1Warning Chime System - Diagnosis System (combination Meter) — 1Warning Chime System - Bcm, Combination Meter (Ecu Diagnosis Information). Diagnosis and Repair Work Flow (Basic Inspection) — 1Sonar System - Precautions. Preparation — 1Sonar System - Sonar Control Unit — 1Dtc/circuit Diagnosis - B2720 Corner Sensor [rl] ++ — 1Audio, Visual & Navigation System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1Audio, Visual & Navigation System - Ecu Diagnosis Information — 1Audio, Visual & Navigation System - Basic Inspection — 1Audio, Visual & Navigation System - Dtc/circuit Diagnosis — 1Dtc/circuit Diagnosis - Multi Av (av Control Unit) ++ — 1Audio, Visual & Navigation System - Symptom Diagnosis — 1Symptom Diagnosis - Multi Av System ++ — 1Audio, Visual & Navigation System - Removal and Installation — 1Audio, Visual & Navigation System - System Description — 1Audio, Visual & Navigation System - Ecu Diagnosis Information — 1Audio, Visual & Navigation System - Basic Inspection — 1Audio, Visual & Navigation System - Dtc/circuit Diagnosis — 1Audio, Visual & Navigation System - Symptom Diagnosis — 1Audio, Visual & Navigation System - Removal and Installation — 1Audio, Visual & Navigation System - System Description — 1Audio, Visual & Navigation System - Basic Inspection — 1Audio, Visual & Navigation System - Dtc/circuit Diagnosis — 1Audio, Visual & Navigation System - Symptom Diagnosis — 1Audio, Visual & Navigation System - Removal and Installation — 1Audio, Visual & Navigation System - System Description — 1Audio, Visual & Navigation System - Basic Inspection — 1Audio, Visual & Navigation System - Dtc/circuit Diagnosis — 1Audio, Visual & Navigation System - Symptom Diagnosis — 1Audio, Visual & Navigation System - Removal and Installation — 1Cruise Control & Driver Assistance :: Cruise Control System — 17Driver Assistance System - System Description — 1Driver Assistance System - Basic Inspection — 1Driver Assistance System - Dtc/circuit Diagnosis — 1Driver Assistance System - System Description — 1System Description - Component Parts ++ — 1System Description - System ++ — 1System Description - Operation ++ — 1System Description - Handling Precaution ++ — 1Driver Assistance System - Ecu Diagnosis Information — 1Driver Assistance System - Basic Inspection — 1Basic Inspection - Distance Sensor Alignment ++ — 1Basic Inspection - Camera Aiming Adjustment ++ — 1Basic Inspection - Action Test ++ — 1Driver Assistance System - Dtc/circuit Diagnosis — 1Dtc/circuit Diagnosis - Laser/radar (distance Sensor) ++ — 1Dtc/circuit Diagnosis - Lane Camera (front Camera Unit) ++ — 1Driver Assistance System - Symptom Diagnosis — 1Driver Assistance System - Removal and Installation — 1Driver Assistance System - System Description — 1System Description - System ++ — 1Driver Assistance System - Basic Inspection — 1Driver Assistance System - Dtc/circuit Diagnosis — 1Drive Mode System - Precautions — 1Drive Mode System - Component Parts. Drive Mode System — 1Drive Mode System - System — 1Drive Mode System - Diagnosis and Repair Work Flow — 1Drive Mode System - Drive Mode Select Switch Circuit — 1Maintenance - Precautions. Preparation — 1Maintenance - General Maintenance — 1Maintenance - Periodic Maintenance — 1Maintenance - Recommended Fluids and Lubricants — 1Maintenance - Engine Maintenance — 1Maintenance - Chassis and Body Maintenance — 1Engine Lubrication System - Periodic Maintenance — 1Engine Lubrication System - Removal and Installation — 1Engine Cooling System - System Description — 1Engine Cooling System - Removal and Installation — 1Engine Control System - Vq35dd — 1Fuel System - Removal and Installation — 1Starting System - System Description — 1Starting System - Dtc/circuit Diagnosis — 1Driveline - Transfer: Ty92b — 1Driveline - Rear Propeller Shaft: 3fcj-Cvj — 1Driveline - Rear Final Drive: R145 — 1Front Axle - Periodic Maintenance — 1Front Axle - Removal and Installation — 1Rear Axle - Periodic Maintenance — 1Rear Axle - Removal and Installation — 1Rear Suspension - Removal and Installation — 1Road Wheels & Tires - System Description — 1Road Wheels & Tires - Basic Inspection — 1Road Wheels & Tires - Dtc/circuit Diagnosis — 1Road Wheels & Tires - Symptom Diagnosis — 1Road Wheels & Tires - Periodic Maintenance — 1Road Wheels & Tires - Removal and Installation — 1Parking Brake System - System Description — 1Parking Brake System - Basic Inspection — 1Parking Brake System - Dtc/circuit Diagnosis — 1Parking Brake System - Symptom Diagnosis — 1Parking Brake System - Removal and Installation — 1Brake Control System - Vdc/tcs/abs — 1Brake Control System - Automatic Brake Hold — 1Brake Control System - Automatic Emergency Braking — 1Brake Control System - Rear Automatic Braking — 1Steering Control System - System Description — 1Steering Control System - Basic Inspection — 1Steering Control System - Dtc/circuit Diagnosis — 1Steering Control System - Symptom Diagnosis — 1Srs Air Bag - Removal and Installation — 1Srs Air Bag Control System - System Description — 1Srs Air Bag Control System - Basic Inspection — 1Srs Air Bag Control System - Symptom Diagnosis — 1Heater & Air Conditioning System - Symptom Diagnosis — 1Heater & Air Conditioning System - Periodic Maintenance — 1Heater & Air Conditioning Control System - Automatic Air Conditioning — 1Instrument Panel - Removal and Installation — 1Instrument Panel - Unit Disassembly and Assembly — 1Seat - Ecu Diagnosis Information — 1Seat - Dtc/circuit Diagnosis — 1Seat - Symptom Diagnosis — 1Automatic Drive Positioner - System Description — 1Automatic Drive Positioner - Ecu Diagnosis Information — 1Automatic Drive Positioner - Dtc/circuit Diagnosis — 1Automatic Drive Positioner - Symptom Diagnosis — 1Automatic Drive Positioner - Removal and Installation — 1Security Control System - System Description — 1Security Control System - Basic Inspection — 1Security Control System - Dtc/circuit Diagnosis — 1Security Control System - Symptom Diagnosis — 1Security Control System - Removal and Installation — 1Glass & Window System - Removal and Installation — 1Power Window Control System - System Description — 1Power Window Control System - Ecu Diagnosis Information — 1Power Window Control System - Basic Inspection — 1Power Window Control System - Dtc/circuit Diagnosis — 1Power Window Control System - Symptom Diagnosis — 1Power Window Control System - Removal and Installation — 1Roof - System Description — 1Roof - Ecu Diagnosis Information — 1Roof - Basic Inspection — 1Roof - Dtc/circuit Diagnosis — 1Roof - Symptom Diagnosis — 1Roof - Removal and Installation — 1Exterior - System Description — 1Exterior - Removal and Installation — 1Body Repair - Repair Information — 1Exterior Lighting System - Led Headlamp — 1Interior Lighting System - Dtc/circuit Diagnosis — 1Interior Lighting System - Removal and Installation — 1Wiper & Washer - System Description — 1Wiper & Washer - Dtc/circuit Diagnosis — 1Wiper & Washer - Symptom Diagnosis — 1Wiper & Washer - Removal and Installation — 1Defogger - System Description — 1Defogger - Dtc/circuit Diagnosis — 1Defogger - Symptom Diagnosis — 1Defogger - Removal and Installation — 1Horn - Removal and Installation — 1Body Control System - Basic Inspection — 1Body Control System - Dtc/circuit Diagnosis — 1Body Control System - Symptom Diagnosis — 1Body Control System - Removal and Installation — 1Lan System - Can Fundamental — 1Lan System - Can — 1Lan System - Can Gateway — 1Power Control System - Ipdm E/r — 1Power Control System - Power Distribution System — 1Charging System - System Description — 1Charging System - Dtc/circuit Diagnosis — 1Power Supply, Ground & Circuit Elements - System Description — 1Power Supply, Ground & Circuit Elements - Basic Inspection — 1Power Supply, Ground & Circuit Elements - Removal and Installation — 1Warning Chime System - System Description — 1Warning Chime System - Dtc/circuit Diagnosis — 1Warning Chime System - Symptom Diagnosis — 1Sonar System - System Description — 1Sonar System - Basic Inspection — 1Sonar System - Dtc/circuit Diagnosis — 1Sonar System - Symptom Diagnosis — 1Sonar System - Removal and Installation — 1Audio, Visual & Navigation System - Nissanconnect — 1Audio, Visual & Navigation System - Intelligent Around View Monitor System — 1Audio, Visual & Navigation System - Rear View Monitor System — 1Audio, Visual & Navigation System - Telematics System — 1Driver Assistance System - Adas Control Unit 2 — 1Driver Assistance System - Driver Assistance System — 1Driver Assistance System - Chassis Control — 1Drive Mode System - Removal and Installation — 1Dtc/circuit Diagnosis (C053c Wheel Speed Sensor ... U2141 Can Comm Circuit) — 1Dtc/circuit Diagnosis (P0011 Intake Valve Timing Control ... P0111 Iat Sensor) — 1Dtc/circuit Diagnosis (P0116 Engine Coolant Temperature Sensor ... P025b Fuel Pump Module a) — 1Dtc/circuit Diagnosis (P026b Injection Timing ... P0420 Three Way Catalyst Function) — 1Dtc/circuit Diagnosis (P0441 Evap Control System ... P0524 Engine Oil Pressure) — 1Dtc/circuit Diagnosis (P0532 A/c Refrigerant Pressure Sensor ... P064d Ecm) — 1Dtc/circuit Diagnosis (P06da Engine Oil Pressure Control Solenoid Valve ... P1217 Engine Over Temperature) — 1Dtc/circuit Diagnosis (P1220 Fuel Pump Control Module (fpcm) ... P1574 Ascd Vehicle Speed Sensor) — 1Dtc/circuit Diagnosis (P1575 Brake Switch ... P2101 Electric Throttle Control Function) — 1Dtc/circuit Diagnosis (P2118 Throttle Control Motor ... P34ac Electric Intake Valve Timing Control Actuator) — 1Dtc/circuit Diagnosis (Active Grille Shutter ... High Pressure Fuel Pump) — 1Dtc/circuit Diagnosis (Ignition Signal ... Variable Induction Air System) — 14012 C1040 Emergency Brake — 14013 C106a Wheel Sensor — 14014 C1078-55 Not Configuration — 14015 C10b4-98 Overheat — 14016 B1001 Lap Pre-Tensioner Lh — 14017 B0001 Driver Air Bag Module — 14018 B100e Knee Air Bag Module Rh — 14019 B142x Collision Detection — 1Dtc/circuit Diagnosis (B20c7-11 A/c Clutch ... B24a6-11 in-Vehicle Sensor) — 1Dtc/circuit Diagnosis (B24a6-15 in-Vehicle Sensor ... U2140-87 Can Comm Err (ecm)) — 1Dtc/circuit Diagnosis (C1f00-1c Control Unit ... C1f04-61 Brake Sw/stop Lamp Sw) — 1Dtc/circuit Diagnosis (C1f05-49 Front Camera Unit ... C1f70-87 Ethernet Circuit) — 1
22steps
~132min
5/5difficulty
Done 0 of 22
  • Front Wiper and Washer System
  • Rear Wiper and Washer System
  • Washer Fluid Warning System

Front Wiper and Washer System Nissan Pathfinder 2022

System Description (Without Rain Sensing Front Wipers)

SYSTEM DIAGRAM

ComponentFunction
Front wiper motor Refer to Front Wiper Motor.
IPDM E/R Controls integrated relays according to the request from the BCM via CAN communication.
BCM
  • Judges each switch status by the combination switch reading function.

  • Requests the front wiper relay and the front wiper HI/LO relay ON to IPDM E/R via CAN communication.

Combination switch (wiper and washer switch) Transmits the status of the combination switch (wiper and washer) to the BCM.
ABS actuator and electric unit (control unit) Transmits Nissan Pathfinder vehicle speed signal to the BCM via CAN communication.
Front and rear washer motor Refer to Front and Rear Washer Motor.

OUTLINE

The front wiper is controlled by each function of BCM and IPDM E/R.

Control by BCM:

  • Combination switch reading function

  • Front wiper control function

Control by IPDM E/R:

  • Front wiper control function

  • Relay control function

Combination meter indicates low washer fluid warning judged with the signal from the washer fluid level switch. For details of low washer fluid warning, refer to System Description.

Signal transmission function list

Signal nameInputOutputDescription
Combination switch signal Combination switch (wiper and washer switch) BCM Inputs the combination switch signal to the BCM.
Nissan Pathfinder Vehicle speed signal ABS actuator and electric unit (control unit) BCM (CAN) Transmits the Nissan Pathfinder vehicle speed signal via CAN communication.
Front wiper request signal BCM IPDM E/R (CAN) Transmits the front wiper request signal via CAN communication.
Front wiper stop position signal IPDM E/R BCM (CAN) Transmits the front wiper stop position signal via CAN communication.
Front wiper status signal IPDM E/R BCM (CAN) Transmits the front wiper status signal via CAN communication.
Front wiper auto stop signal Front wiper motor IPDM E/R Transmits the front wiper auto stop signal to the IPDM E/R.

FRONT WIPER BASIC OPERATION

  • BCM detects the combination switch (wiper and washer switch) condition by the combination switch reading function.

  • BCM transmits the front wiper request signal to the IPDM E/R via CAN communication depending on each operating condition of the front wiper.

  • IPDM E/R turns ON/OFF the integrated front wiper relay and the front wiper HIGH relay according to the front wiper request signal. IPDM E/R provides the power supply to operate the front wiper HI/LO operation.

FRONT WIPER LO OPERATION

  • BCM transmits the front wiper request signal (LOW) to the IPDM E/R via CAN communication according to the front wiper LO operating condition.

    Front wiper LO operating condition:

    • Ignition switch ON

    • Front wiper switch LO or front wiper switch MIST (while pressing)

  • IPDM E/R turns ON the integrated front wiper relay according to the front wiper request signal (LOW).

FRONT WIPER HI OPERATION

  • BCM transmits the front wiper request signal (HIGH) to the IPDM E/R via CAN communication according to the front wiper HI operating condition.

    Front wiper HI operating condition:

    • Ignition switch ON

    • Front wiper switch HI

  • IPDM E/R turns ON the integrated front wiper relay and the front wiper HIGH relay according to the front wiper request signal (HIGH).

FRONT WIPER INT OPERATION

  • BCM transmits the front wiper request signal (LOW) to the IPDM E/R via CAN communication depending on the front wiper INT operating condition and intermittent operation delay interval according to the wiper volume dial position.

    Front wiper INT operating condition:

    • Ignition switch ON

    • Front wiper switch INT

  • IPDM E/R turns ON the integrated front wiper relay so that the front wiper is operated only once according to the front wiper request signal (LOW) and front wiper request signal (RETURN).

  • BCM detects stop position/except stop position of the front wiper motor according to the front wiper stop position signal received from the IPDM E/R via CAN communication.

  • BCM transmits the front wiper request signal (LOW) again after the intermittent operation delay interval.

Front wiper intermittent operation with vehicle speed:

  • BCM calculates the intermittent operation delay interval from the following:

    • Nissan Pathfinder Vehicle speed signal

    • Wiper volume dial position

Unit: Second

Intermittent operation delay Interval
Intermittent operation interval Nissan Pathfinder Vehicle speed
Accelerating

0 – 18,6 mph

(0 – 30 km/h)

18.7 – 37 mph

(31 – 60 km/h)

37.4 – 65 mph

(61 – 105 km/h)

65 mph or more

(106 km/h)
Decelerating

0 – 16,5 mph

(0 – 25 km/h)

16.6 – 34 mph

(26 – 55 km/h)

34.3 – 62 mph

(56 – 100 km/h)

62 mph or more

(101 km/h)

Long

↑

↓

Short
Wiper volume dial position 1 21.0* 18.9 15.8 12.6
2 11.2* 10.1 8.4 6.7
3 5.6* 5.0 4.2 3.4
4 2.8* 2.5 2.1 1.7
5 1.4* 1.3 1.1 0.8

*: When operation setting is not linked with vehicle speed.

FRONT WIPER AUTO STOP OPERATION

  • BCM transmits the front wiper request signal (RETURN) to the IPDM E/R via CAN communication when the front wiper switch is turned OFF.

  • IPDM E/R detects the front wiper auto stop position signal from the front wiper motor to find out the front wiper motor position (stop position/except stop position).

  • When the IPDM E/R receives the front wiper request signal (RETURN) from the BCM and the front wiper motor position is not in the stop position, the IPDM E/R turns ON the front wiper relay until the front wiper motor returns to the stop position.

  • When the front wiper motor returns to the stop position, the IPDM E/R transmits front wiper status signal to the BCM via CAN communication.

  • When the BCM receives front wiper status signal from the IPDM E/R, the BCM transmits the front wiper request signal (STOP) to the IPDM E/R via CAN communication.

FRONT WIPER OPERATION LINKED WITH WASHER

  • BCM transmits the front wiper request signal (LO) to the IPDM E/R via CAN communication according to the washer linked operating condition of the front wiper.

  • BCM transmits the front wiper request signal (LO) so that the front wiper operates approximately two times when the front washer switch OFF signal is detected.

    Washer linked operating condition of front wiper:

    • Ignition switch ON

    • Front washer switch ON (0.4 seconds or more)

  • IPDM E/R turns ON the integrated front wiper relay according to the front wiper request signal (LO).

  • The washer pump is supplied power and ground through the combination switch (wiper and washer switch) with the front washer switch ON.

WIPER LINKED AUTO LIGHTING FUNCTION

When lighting switch is in the AUTO position, front wiper operates, and then headlamp ON. Refer to System Description.

FRONT WIPER SERVICE POSITION OPERATION

When this operation is activated, front wiper operates at LO speed and stops in the service position so that front wiper arms can pulled up without contacting the hood.

Following 2 methods are the operation procedures.

Method A: With Ignition Switch ON

  1. Ignition switch ON.

  2. Confirm the vehicle is stopped.

  3. Confirm front wiper is in stop position.

  4. Quickly (within 0.5 seconds) move wiper switch lever to MIST position twice, wiper will move to service position.

  5. To exit service position, operate front wiper switch.

Method B: With Ignition Switch OFF

  1. Ignition switch OFF.

  2. Confirm front wiper is in stop position.

  3. Within 1 minute after placing ignition switch OFF, quickly (within 0.5 seconds) move wiper switch lever to MIST position twice, wiper will move to service position.

  4. To exit service position, place ignition switch ON and operate front wiper switch.

System Description (With Rain Sensing Front Wipers)

SYSTEM DIAGRAM

ComponentFunction
Front wiper motor Refer to Front Wiper Motor.
IPDM E/R Controls integrated relays according to the request from the BCM via CAN communication.
BCM
  • Judges each switch status by the combination switch reading function.

  • Requests the front wiper relay and the front wiper HI/LO relay ON to IPDM E/R via CAN communication.

Combination switch (wiper and washer switch) Transmits the status of the combination switch (wiper and washer) to the BCM.
ABS actuator and electric unit (control unit) Transmits Nissan Pathfinder vehicle speed signal to the BCM via CAN communication.
Front and rear washer motor Refer to Front and Rear Washer Motor.
Rain sensor Transmits the rain sensor signal to the BCM via LIN communication.

OUTLINE

The front wiper is controlled by each function of BCM and IPDM E/R.

Control by BCM:

  • Combination switch reading function

  • Front wiper control function

  • Rain sensing wiper function

Control by IPDM E/R:

  • Front wiper control function

  • Relay control function

Combination meter indicates low washer fluid warning judged with the signal from the washer fluid level switch. For details of low washer fluid warning, refer to System Description.

Signal transmission function list

Signal nameInputOutputDescription
Combination switch signal Combination switch (wiper and washer switch) BCM Inputs the combination switch signal to the BCM.
Nissan Pathfinder Vehicle speed signal ABS actuator and electric unit (control unit) BCM (CAN) Transmits the Nissan Pathfinder vehicle speed signal via CAN communication.
Front wiper request signal BCM IPDM E/R (CAN) Transmits the front wiper request signal via CAN communication.
Front wiper stop position signal IPDM E/R BCM (CAN) Transmits the front wiper stop position signal via CAN communication.
Front wiper status signal IPDM E/R BCM (CAN) Transmits the front wiper status signal via CAN communication.
Front wiper auto stop signal Front wiper motor IPDM E/R Transmits the front wiper auto stop signal to the IPDM E/R.
Rain sensor signal Rain sensor BCM (LIN) Transmits the rain sensor signal to the BCM via LIN communication.
Nissan Pathfinder Vehicle condition BCM Rain sensor (LIN) Transmits the Nissan Pathfinder vehicle condition to the rain sensor via LIN communication.

FRONT WIPER BASIC OPERATION

  • BCM detects the combination switch (wiper and washer switch) condition by the combination switch reading function.

  • BCM transmits the front wiper request signal to the IPDM E/R via CAN communication depending on each operating condition of the front wiper.

  • IPDM E/R turns ON/OFF the integrated front wiper relay and the front wiper HIGH relay according to the front wiper request signal. IPDM E/R provides the power supply to operate the front wiper HI/LO operation.

FRONT WIPER LO OPERATION

  • BCM transmits the front wiper request signal (LOW) to the IPDM E/R via CAN communication according to the front wiper LO operating condition.

    Front wiper LO operating condition:

    • Ignition switch ON

    • Front wiper switch LO or front wiper switch MIST (while pressing)

  • IPDM E/R turns ON the integrated front wiper relay according to the front wiper request signal (LOW).

FRONT WIPER HI OPERATION

  • BCM transmits the front wiper request signal (HIGH) to the IPDM E/R via CAN communication according to the front wiper HI operating condition.

    Front wiper HI operating condition:

    • Ignition switch ON

    • Front wiper switch HI

  • IPDM E/R turns ON the integrated front wiper relay and the front wiper HIGH relay according to the front wiper request signal (HIGH).

FRONT WIPER INT OPERATION

  • BCM transmits the front wiper request signal (LOW) to the IPDM E/R via CAN communication depending on the front wiper INT operating condition and intermittent operation delay interval according to the wiper volume dial position.

    Front wiper INT operating condition:

    • Ignition switch ON

    • Front wiper switch INT

  • IPDM E/R turns ON the integrated front wiper relay so that the front wiper is operated only once according to the front wiper request signal (LOW) and front wiper request signal (RETURN).

  • BCM detects stop position/except stop position of the front wiper motor according to the front wiper stop position signal received from the IPDM E/R via CAN communication.

  • BCM transmits the front wiper request signal (LOW) again after the intermittent operation delay interval.

Front wiper intermittent operation with vehicle speed:

  • BCM calculates the intermittent operation delay interval from the following:

    • Nissan Pathfinder Vehicle speed signal

    • Wiper volume dial position

Unit: Second

Intermittent operation delay Interval
Intermittent operation interval Nissan Pathfinder Vehicle speed
Accelerating

0 – 18,6 mph

(0 – 30 km/h)

18.7 – 37 mph

(31 – 60 km/h)

37.4 – 65 mph

(61 – 105 km/h)

65 mph or more

(106 km/h)
Decelerating

0 – 16,5 mph

(0 – 25 km/h)

16.6 – 34 mph

(26 – 55 km/h)

34.3 – 62 mph

(56 – 100 km/h)

62 mph or more

(101 km/h)

Long

↑

↓

Short
Wiper volume dial position 1 21.0* 18.9 15.8 12.6
2 11.2* 10.1 8.4 6.7
3 5.6* 5.0 4.2 3.4
4 2.8* 2.5 2.1 1.7
5 1.4* 1.3 1.1 0.8

*: When operation setting is not linked with vehicle speed.

FRONT WIPER AUTO OPERATION

Rain Detection

Rain level and sensor conditions are detected by rain sensor.

  • BCM transmits the vehicle conditions (vehicle speed, front wiper condition, rain sensor sensitivity setting, etc.) to the rain sensor via LIN communication.

  • Rain sensor judges a wiping speed for front wiper by rain condition and the Nissan Pathfinder vehicle conditions. It transmits the wiping speed request signal to the BCM via LIN communication.

Auto Wiping Operation

  • BCM receives the wiping speed request signal from the rain sensor via LIN communication.

  • BCM controls front wiper operation according to the wiping speed request signals. It transmits the front wiper request signals (LO or HI) to the IPDM E/R via CAN communication.

    Front wiper AUTO operating condition:

    • Ignition switch ON

    • Front wiper switch AUTO

Rain Sensor Sensitivity Setting

BCM determines rain sensor sensitivity according to wiper volume dial position.

  1. High sensitivity
  2. Medium−high sensitivity
  3. Low−medium sensitivity
  4. Low sensitivity

Splash mode operation

The front wiper is operated at HI regardless of the wiper volume adjustment position when water drops are instantaneously sprayed over the windshield glass due to water splash from oncoming Nissan Pathfinder vehicles or other causes. After that, AUTO operation is performed depending on the amount of water drops.

SPLASH MODE OPERATION CONDITIONS:

  • Front wiper switch AUTO

  • Ignition switch ON

FRONT WIPER AUTO STOP OPERATION

  • BCM transmits the front wiper request signal (RETURN) to the IPDM E/R via CAN communication when the front wiper switch is turned OFF.

  • IPDM E/R detects the front wiper auto stop position signal from the front wiper motor to find out the front wiper motor position (stop position/except stop position).

  • When the IPDM E/R receives the front wiper request signal (RETURN) from the BCM and the front wiper motor position is not in the stop position, the IPDM E/R turns ON the front wiper relay until the front wiper motor returns to the stop position.

  • When the front wiper motor returns to the stop position, the IPDM E/R transmits front wiper status signal to the BCM via CAN communication.

  • When the BCM receives front wiper status signal from the IPDM E/R, the BCM transmits the front wiper request signal (STOP) to the IPDM E/R via CAN communication.

FRONT WIPER OPERATION LINKED WITH WASHER

  • BCM transmits the front wiper request signal (LO) to the IPDM E/R via CAN communication according to the washer linked operating condition of the front wiper.

  • BCM transmits the front wiper request signal (LO) so that the front wiper operates approximately two times when the front washer switch OFF signal is detected.

    Washer linked operating condition of front wiper:

    • Ignition switch ON

    • Front washer switch ON (0.4 seconds or more)

  • IPDM E/R turns ON the integrated front wiper relay according to the front wiper request signal (LO).

  • The washer pump is supplied power and ground through the combination switch (wiper and washer switch) with the front washer switch ON.

WIPER LINKED AUTO LIGHTING FUNCTION

When lighting switch is in the AUTO position, front wiper operates, and then headlamp ON. Refer to System Description.

FRONT WIPER SERVICE POSITION OPERATION

When this operation is activated, front wiper operates at LO speed and stops in the service position so that front wiper arms can pulled up without contacting the hood.

Following 2 methods are the operation procedures.

Method A: With Ignition Switch ON

  1. Ignition switch ON.

  2. Confirm the vehicle is stopped.

  3. Confirm front wiper is in stop position.

  4. Quickly (within 0.5 seconds) move wiper switch lever to MIST position twice, wiper will move to service position.

  5. To exit service position, operate front wiper switch.

Method B: With Ignition Switch OFF

  1. Ignition switch OFF.

  2. Confirm front wiper is in stop position.

  3. Within 1 minute after placing ignition switch OFF, quickly (within 0.5 seconds) move wiper switch lever to MIST position twice, wiper will move to service position.

  4. To exit service position, place ignition switch ON and operate front wiper switch.

Rear Wiper and Washer System Nissan Pathfinder SUV

System Description

SYSTEM DIAGRAM

ComponentFunction
Rear wiper motor Refer to Rear Wiper Motor.
BCM Supplies power to the rear wiper motor
Combination switch (wiper and washer switch) Transmits the status of the combination switch (wiper and washer) to the BCM.
Front and rear washer motor Refer to Front and Rear Washer Motor.

OUTLINE

The rear wiper is controlled by each function of BCM.

Control by BCM:

  • Combination switch reading function

  • Rear wiper control function

Signal transmission function list

Signal nameInputOutputDescription
Washer switch signal Combination switch (wiper and washer switch) Front and rear washer motor Washer switch signal activates/deactivates the front and rear washer motor.
Combination switch signal Combination switch (wiper and washer switch) BCM Transmits the combination switch signal to the BCM.
Rear wiper stop position signal Rear wiper motor BCM Transmits the rear wiper stop position signal to the BCM.

REAR WIPER BASIC OPERATION

  • BCM detects the combination switch (wiper and washer switch) condition by the combination switch reading function.

  • BCM controls the rear wiper to start or stop.

REAR WIPER ON OPERATION

  • BCM supplies power to the rear wiper motor according to the rear wiper ON operating condition.

    Rear wiper ON operating condition:

    • Ignition switch ON

    • Rear wiper switch ON

REAR WIPER INT OPERATION

  • BCM supplies power to the rear wiper motor according to the INT operating condition.

    Rear wiper INT operating condition:

    • Ignition switch ON

    • Rear wiper switch INT

  • BCM controls the rear wiper to operate once.

  • BCM detects the rear wiper motor stop position.

  • BCM supplies power to the rear wiper motor after an intermittent from the stop of the rear wiper motor.

REAR WIPER AUTO STOP OPERATION

  • BCM stops supplying power to the rear wiper motor when the rear wiper switch is turned OFF.

  • BCM reads a rear wiper stop position signal from the rear wiper motor to detect a rear wiper motor position.

  • When the rear wiper motor is at other than the stopping position, BCM continues to supply power to the rear wiper motor until it returns to the stop position.

REAR WIPER OPERATION LINKED WITH WASHER

  • BCM supplies power to the rear wiper motor according to the washer linked operating condition of rear wiper. When the rear washer switch is turned OFF, BCM controls rear wiper to operate approximately 3 times.

    Washer linked operating condition of rear wiper:

    • Ignition switch ON

    • Rear washer switch ON

  • The front and rear washer motor is supplied power and ground through the combination switch (wiper and washer switch) with the rear washer switch ON.

REAR WIPER OPERATION LINKED WITH REVERSE

  • BCM controls rear wiper to INT operating according to the conditions of rear wiper operation linked with reverse.

    Condition of rear wiper operation linked with reverse:

    • Ignition switch ON

    • Front wiper switch: LO, HI, INT or AUTO

    • Rear wiper switch OFF

    • Shift lever “R”

  • When shift lever is shifted to “R”, TCM transmits reverse switch signal to BCM via CAN communication, and then operates rear wiper motor.

Washer Fluid Warning System Nissan Pathfinder 5th Gen

System Description

SYSTEM DIAGRAM

ComponentFunction
Washer fluid level switch Refer to Washer Fluid Level Switch.
Combination meter The combination meter displays the washer fluid warning according to the washer fluid level switch input.

Signal transmission function list

Signal nameInputOutputDescription
Washer fluid level switch signal Washer fluid level switch Combination meter Transmits the washer fluid level switch signal to the combination meter.

DESIGN/PURPOSE

Washer fluid warning reminds the driver that the washer fluid level is insufficient.

SymbolMessage
Low Washer Fluid

SYNCHRONIZATION WITH MASTER WARNING LAMP

Not applicable

SIGNAL PATH

  • When washer fluid level is low, the washer fluid level switch turns ON and transmits the washer fluid level switch signal to the combination meter.

  • The combination meter displays washer fluid warning according to washer fluid level switch signal.

When all of the conditions listed below are satisfied:

  • Ignition switch is ON.

  • Washer fluid level is insufficient. (Washer fluid level switch is ON and 3 minutes have passed.)

When any of the conditions listed below are satisfied:

  • Ignition switch is OFF.

  • After refill the washer fluid. (Washer fluid level switch is OFF and 30 seconds have passed.)

TIMING CHART