Accelerator Control System - Accelerator Pedal Assembly
In this manual: Accelerator Control System - Accelerator Pedal Assembly
~1min read
Exploded View

| 1. | Accelerator pedal assembly |
Removal and Installation
REMOVAL
Remove accelerator pedal assembly nuts.
Disconnect harness connector (A) from the accelerator pedal assembly (1).

![]() |
: Front |
Remove the accelerator pedal assembly.
INSTALLATION
Installation is in the reverse order of removal.
Perform inspection after installation. Refer to Inspection.
Inspection
Inspection after installation
Check that the accelerator pedal moves smoothly within the specified range.


: Front Accelerator pedal stroke (A) : Refer to Accelerator Control. Check the accelerator pedal height.
Accelerator pedal height : Refer to Accelerator Control. Depress and release the accelerator pedal to check that it returns quickly and smoothly to the original released position.
Was this page helpful?
