Audio, Visual & Navigation System - Basic Inspection
- Diagnosis and Repair Work Flow
- Additional Service When Replacing Tcu
- Additional Service After Automatic Report
- Configuration (tcu)
Diagnosis and Repair Work Flow Nissan Pathfinder 2022
Work Flow
OVERALL SEQUENCE

DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred).
At the dealer, check whether the customer’s Nissan Pathfinder vehicle has been registered for the telematics service. If it is not registered, do not replace the TCU, and register for the telematics service.
GO TO 2.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition when the symptom is detected.
>>GO TO 3.
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON and wait for 2 seconds or more.
Select “Self Diagnostic Result” mode of “IVC”.
Are any DTCs detected?
YES>>Refer to DTC Index.
NO>>GO TO 4.
PERFORM SYMPTOM DIAGNOSIS
Refer to Symptom Table.
>>GO TO 5.
FINAL CHECK
After confirming registration status and DTC status, if the phenomenon that the telematics service cannot be used continues for more than 5 minutes and does not resolve, replace the TCU. Refer to Removal and Installation.
Refer to symptom described by the customer in step 2.
Is the symptom still present?
YES>>GO TO 2.
NO>>Inspection End.
Additional Service When Replacing Tcu Nissan Pathfinder Fifth generation
Description
When a TCU is replaced, TCU activation is required. Refer to TSB for activation details.
Additional Service After Automatic Report Nissan Pathfinder R53
Description
When the automatic report function of the TCU is activated, the TCU is locked. After the automatic report function of the TCU is activated, it is necessary to release the lock.
Work Procedure
AUTOMATIC REPORT PREVENTION RELEASE
CONSULT Work support
Ignition switch ON.
Select "Automatic Notification Prevention Release" to unlock the TCU.
Work End.
Configuration (tcu) Nissan Pathfinder 5th Gen
Description
Vehicle specification needs to be written with CONSULT after replacing the TCU.
Configuration requires a network connection.
CONSULT connects to network and downloads the configuration data from the server. Refer to Work Procedure.
Work Procedure
WRITING VEHICLE SPECIFICATION
CONSULT
Perform writing of the Nissan Pathfinder vehicle specification to TCU following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
>>Work End.