Drive Mode System - Component Parts. Drive Mode System
In this manual: Drive Mode System - Component Parts. Drive Mode System
~5min read
Component Parts Location
2WD MODELS
A.
Center console finisher assembly
B.
Upside of instrument lower panel LH
No.
Component
Description
1.
Combination meter
Combination meter receives the following signals from chassis control module:
Drive mode signal
Combination meter displays the status of drive mode selected by the driver on the information display according to the received signal.
Refer to Component Parts Location (full TFT meter), Component Parts Location (7 inch information display meter) for detailed component location.
2.
ABS (Anti-lock Braking System) actuator and electric unit (control unit)
ABS actuator and electric unit (control unit) receives the following signals from chassis control module:
Active trace control function control signal
Drive mode signal
ABS actuator and electric unit (control unit) controls the active trace control function according to the received signal.
Refer to Component Parts Location for detailed component location.
3.
ECM (Engine Control Module)
ECM receives the following signal from chassis control module:
Drive mode signal
ECM controls throttle angle characteristics and torque according to the received signal and transmits the following signals to ADAS control unit 2.
ECO pedal reaction force control signal
Refer to Component Parts Location for detailed component location.
4.
EPS (Electric Power Steering) control unit
EPS control unit receives the following signal from chassis control module:
Drive mode signal
EPS control unit controls the steering mode and response according to the received signal.
Refer to Component Parts Location for detailed component location.
5.
BCM (Body Control Module)
BCM transmits the following signal to the chassis control module via CAN communication:
Drive mode signal
Refer to Component Parts Location for detailed component location.
6.
ADAS (Advanced Driver Assistance System) control unit 2
ADAS control unit 2 receives the following signal from chassis control module:
Drive mode signal
ADAS control unit 2 controls accelerator reaction force of accelerator pedal actuator according to the received signal and transmits the following signals to accelerator pedal actuator.
ECO pedal reaction force control signal
Refer to Component Parts Location for detailed component location.
7.
Drive mode select switch (2WD)
Refer to Drive Mode Select Switch.
8.
Chassis control module
Chassis control module receives the following drive mode select switch signals from BCM via CAN communication:
Up/down signal
Chassis control module identifies the drive mode selected by the driver according to the received signal and transmits the following signal to related control modules:
Drive mode signal
Refer to Component Parts Location for detailed component location.
4WD MODELS
A.
Center console finisher assembly
B.
Upside of instrument lower panel LH
No.
Component
Description
1.
Combination meter
Combination meter receives the following signals from chassis control module:
Drive mode signal
Combination meter displays the status of drive mode selected by the driver on the information display according to the received signal.
Refer to Component Parts Location (full TFT meter), Component Parts Location (7 inch information display meter) for detailed component location.
2.
ABS (Anti-lock Braking System) actuator and electric unit (control unit)
ABS actuator and electric unit (control unit) receives the following signals from chassis control module:
Active trace control function control signal
Drive mode signal
ABS actuator and electric unit (control unit) controls the active trace control function according to the received signal.
Refer to Component Parts Location for detailed component location.
3.
ECM (Engine Control Module)
ECM receives the following signal from chassis control module:
Drive mode signal
ECM controls throttle angle characteristics and torque according to the received signal and transmits the following signals to ADAS control unit 2:
ECO pedal reaction force control signal
Refer to Component Parts Location for detailed component location.
4.
EPS (Electric Power Steering) control unit
EPS control unit receives the following signal from chassis control module:
Drive mode signal
EPS control unit controls the steering mode and response according to the received signal.
Refer to Component Parts Location for detailed component location.
5.
BCM (Body Control Module)
BCM transmits the following signal to the chassis control module via CAN communication:
Drive mode signal
Refer to Component Parts Location for detailed component location.
6.
ADAS (Advanced Driver Assistance System) control unit 2
ADAS control unit 2 receives the following signal from chassis control module:
Drive mode signal
ADAS control unit 2 controls accelerator reaction force of accelerator pedal actuator according to the received signal and transmits the following signals to accelerator pedal actuator:
ECO pedal reaction force control signal
Refer to Component Parts Location for detailed component location.
7.
4WD control unit
AWD control unit receives the following signal from chassis control module:
Drive mode signal
AWD control unit controls the mode and response according to the received signal.
Refer to Component Parts Location for detailed component location.
8.
Drive mode select switch (4WD)
Refer to Drive Mode Select Switch.
9.
Chassis control module
Chassis control module receives the following drive mode select switch signals from BCM via CAN communication:
Up/down signal
Chassis control module identifies the drive mode selected by the driver according to the received signal and transmits the following signal to related control modules:
Drive mode signal
Refer to Component Parts Location for detailed component location.
Drive Mode Select Switch
FUNCTIONS WITHIN THE SYSTEM
When drive mode select switch is operated, driving mode is changed for each system.
2WD models
4WD models
:
SAND
:
MUD/RUT
:
SNOW
:
AUTO
:
ECO
:
SPORT
:
TOW
:
hill descent control switch
2WD Models: Refer to System Description (2WD Models).
4WD Models: Refer to System Description (4WD Models).
INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM
Drive mode select switch detected the mode status.
INDIVIDUAL OPERATION
Transmit the drive mode select switch signal to BCM.