Heater & Air Conditioning Control System - System Description
- Component Parts ➤
- System ➤
- Operation ➤
- Diagnosis System (hvac)
Component Parts ➤ Nissan Pathfinder 5th Gen
System ➤ Nissan Pathfinder SUV
Operation ➤ Nissan Pathfinder 5th Gen
Diagnosis System (hvac) Nissan Pathfinder R53
CONSULT Function
CONSULT performs the following functions via CAN communication with A/C auto amp.:
| Diagnostic mode | Description |
|---|---|
| Self Diagnostic Result | Display non-network DTC which A/C auto amp. memorizes. |
| Data Monitor | Displays the input/output signal of A/C auto amp. |
| Active Test | The signals used to activate each device are forcibly supplied from A/C auto amp. |
| Work support | Changes the setting for each setting function. |
| ECU Identification | Displays the part number of A/C auto amp. |
| Network-DTC* | Display network DTC which A/C auto amp. memorizes when performing “Diagnosis (All System)”. |
*: Displays when performing “Diagnosis (All System)”.
SELF-DIAGNOSIS RESULTS
Diagnosis result that is judged by A/C auto amp. can be checked. Refer to DTC Index.
DATA MONITOR
Input/output signal of A/C auto amp. can be checked.
| Monitor item [Unit] | Description | |
|---|---|---|
| IN-VEH TEMP | [°C] | In-Nissan Pathfinder vehicle temperature value converted from in-vehicle sensor signal received from in-vehicle sensor. |
| INT TEMP SEN | [°C] | Evaporator fin temperature value converted from intake sensor signal received from intake sensor. |
| SUNLOAD SEN | [W/m^2] | Sunload value converted from sunload sensor signal received from sunload sensor. |
| AMB SEN CAL | [°C] | Ambient temperature value calculated by A/C auto amp. |
| IN-VEH CAL | [°C] | In-Nissan Pathfinder vehicle temperature (driver side) value calculated by A/C auto amp. |
| PASS IN CAL | [°C] | In-Nissan Pathfinder vehicle temperature (RH side) value calculated by A/C auto amp. |
| INT TEMP CAL | [°C] | Evaporator fin temperature value calculated by A/C auto amp. |
| SUNL SEN CAL | [W/m^2] | Sunload value calculated by A/C auto amp. |
| XM | Target discharge air temperature (LH side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor. | |
| FAN REQ SIG | [On/Off] | Displays blower fan ON signal ON/OFF status transmitted to ECM. |
| COMP REQ SIG | [On/Off] | Displays A/C ON signal ON/OFF status transmitted to ECM. |
| A/C comp clutch status | [On/Off] | A/C compressor status judged from the A/C compressor feedback signal received from IPDM E/R via CAN communication. |
| RR XM | [°C] | Target discharge air temperature (rear) judged by A/C auto amp. depending on the temperature setting and the value from each sensor. |
| Assist seat target air temperature | Target discharge air temperature (RH side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor. | |
| Blower fan duty | [%] | Duty ratio of front blower motor judged by A/C auto amp. |
| Compressor ECV duty | [%] | Duty ratio of electric control valve |
| AMB TEMP SEN | [°C] | Ambient temperature signal value received from combination meter via CAN communication. |
| Nissan Pathfinder Vehicle speed | [km/h] | Vehicle speed signal value received from ABS actuator and electric unit (control unit) via CAN communication. |
| ODO/TRIP METER | [km] | Odometer signal value received from ABS actuator and electric unit (control unit) via CAN communication. |
| Engine RPM | [rpm] | Engine speed signal value received from ECM via CAN communication. |
| ENG COOL TEMP | [°C] | Engine coolant temperature signal value received from ECM via CAN communication. |
WORK SUPPORT
Setting change of each setting functions can be performed.
| Work support items | Description | Display | Setting |
|---|---|---|---|
| TEMP SET CORRECT | If the temperature felt by the customer is different from the air flow temperature controlled by the temperature setting, the A/C auto amp. control temperature can be adjusted to compensate for the temperature setting. | 0 °C/0°F* | A/C auto amp. control temperature against set temperature can be set (-3.0)°C/(-6)°F – (+3.0)°C/(+6)°F at a rate of 0,5 °C/1°F per adjustment. |
| REC MEMORY SET | |||
| FRE MEMORY SET | |||
| BLOW SET | In FOOT mode, the air blowing to DEF can change ON/OFF. | O/A C/M* |
|
| O/A O/M |
|
||
| C/A O/M |
|
||
| C/A C/M |
|
||
| TARGET EVAPORATOR TEMP UPPER LIMIT SETTING | Setting of upper limit value of target evaporator temperature can be changed. Control characteristic of A/C compressor control (freezing protection control and refrigerant discharge amount control) changes according to change of the setting, and then operation ratio of A/C compressor and refrigerant discharge amount are changed. According to change of the setting, control characteristic focusing on the fuel consumption can be adjusted to control characteristic focusing on the cooling capacity. | DEFAULT* | Target evaporator temperature upper limit value: 10 °C |
| 3 °C | Target evaporator temperature upper limit value: 3 °C | ||
| 5 °C | Target evaporator temperature upper limit value: 5 °C | ||
| 7 °C | Target evaporator temperature upper limit value: 7 °C | ||
| STOP/START SYSTEM OPERATION COND SETTING | |||
| AIR INLET CHANGE SETTING | |||
| AIR FLOW REDUCTION SETTING | |||
*: Initial status
ACTIVE TEST
The signals used to activate each device forcibly supplied from A/C auto amp. operation check of air conditioning system can be performed.
| Test item | Operation | Description |
|---|---|---|
| HVAC TEST | The operation check of air conditioning system can be performed by selecting the mode. Refer to the following table for the conditions of each mode. | |
| Heater and ventilation seat FL | Off | OFF |
| Heat HI | Operates the front seat heater LH. | |
| Vent HI | ||
| Heater and ventilation seat FR | Off | OFF |
| Heat HI | Operates the front seat heater RH. | |
| Vent HI | ||
| Heated steering wheel request | Heated steering wheel request | Operates the heated steering wheel relay. |
| Off | OFF | |
Check each output device
| — | Test item | ||||||
|---|---|---|---|---|---|---|---|
| MODE 1 | MODE 2 | MODE 3 | MODE 4 | MODE 5 | MODE 6 | MODE 7 | |
| Mode door motor position | VENT | VENT | B/L | B/L | FOOT | D/F | DEF |
| Intake door motor position | REC | REC | 20% FRE | 20% FRE | FRE | FRE | FRE |
| Magnetic clutch (A/C compressor request signal) | ON | ON | ON | ON | OFF | OFF | ON |
| Air mix door motor LH position | FULL COLD | FULL HOT | FULL COLD | FULL HOT | FULL HOT | FULL HOT | FULL HOT |
| Air mix door motor RH position | FULL COLD | FULL HOT | FULL COLD | FULL HOT | FULL HOT | FULL HOT | FULL HOT |
| Air mix door motor (rear) position | FULL COLD | FULL HOT | FULL COLD | FULL HOT | FULL HOT | FULL HOT | FULL HOT |
| Front blower motor control signal (duty ratio) | 35% | 35% | 60% | 60% | 90% | 90% | 35% |
| ECV duty ratio | 80% | 80% | 40% | 40% | 0% | 0% | 90% |
ECU IDENTIFICATION
Part number of A/C auto amp. can be checked.