Engine Control System - Periodic Maintenance
- Idle Speed
- Ignition Timing
- Evap Leak Check
- Positive Crankcase Ventilation
Idle Speed Nissan Pathfinder Fifth generation
Inspection
CHECK IDLE SPEED
With CONSULT
Check idle speed in “Data Monitor” mode of “ENGINE”.
With GST
Check idle speed with Service $01 of GST.
| Specification | : Idle Speed |
Ignition Timing Nissan Pathfinder R53
Inspection
CHECK IGNITION TIMING
Attach timing light (A) to loop wire
as shown.
Check ignition timing.

Specification : Ignition Timing
Evap Leak Check Nissan Pathfinder SUV
Inspection
WITH CONSULT
To locate the EVAP leak, install EVAP service port adapter and pressure pump to EVAP service port.

Turn ignition switch ON.
On CONSULT screen, select “ENGINE”>>“Work support”>>“EVAP SYSTEM CLOSE”.
Touch “START”. A bar graph (Pressure indicating display) will appear on the screen.
Apply positive pressure to the EVAP system until the pressure indicator reaches the middle of the bar graph.
Remove EVAP service port adapter and hose with pressure pump.
Locate the leak using a leak detector. Refer to System Description.

WITHOUT CONSULT
To locate the EVAP leak, install EVAP service port adapter and pressure pump to EVAP service port.

Apply battery voltage between the terminals of EVAP canister vent control valve to make a closed EVAP system.
To locate the leak, deliver positive pressure to the EVAP system until pressure gauge points reach 1.38 to 2.76 kPa (0.014 to 0.028 kg/cm2, 0.2 to 0.4 psi).
Remove EVAP service port adapter and hose with pressure pump.
Locate the leak using a leak detector. Refer to System Description.

Positive Crankcase Ventilation Nissan Pathfinder 5th Gen
Inspection
CHECK PCV VALVE
With engine running at idle, remove PCV valve from rocker cover. A properly working valve makes a hissing noise as air passes through it. A strong vacuum should be felt immediately when a finger is placed over valve inlet.

Perform the following procedure according to the inspection results.
Inspection results normal: INSPECTION END
Inspection results abnormal: Replace PCV valve. Refer to Component Parts Location.