Mirrors - Dtc/circuit Diagnosis
- B2ccf-04 Passenger Door Mirror Control Module
- Power Supply and Ground Circuit (smart Rear View Mirror)
- Passenger Door Mirror Control Module
- Smart Rear View Mirror Circuit
- Door Mirror Remote Control Switch (mirror/select Switch)
- Door Mirror Remote Control Switch (retractor Switch)
B2ccf-04 Passenger Door Mirror Control Module Nissan Pathfinder 5th Gen
DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | |
|---|---|---|---|
| B2CCF-04 | Passenger door mirror control module | Diagnosis condition | Ignition switch is ON or OFF (auto ACC status). |
| Signal (terminal) | LIN communication (door mirror) signal | ||
| Threshold | BCM detects communication error with passenger door mirror control module. | ||
| Diagnosis delay time | 1 second or less | ||
POSSIBLE CAUSE
Passenger door mirror control module
LIN communication line
BCM
FAIL SAFE
—
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “BCM”.
Check DTC.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
DTC Diagnosis Procedure
CHECK LIN COMMUNICATION SIGNAL
Ignition switch ON.
Check signal between passenger door mirror control module harness connector and ground using an oscilloscope.
(+) (−) Signal
(Reference value)Passenger door mirror control module Connector Terminal D108 7 Ground 
Is the inspection result normal?
YES>>GO TO 3.
NO>>GO TO 2.
CHECK PASSENGER DOOR MIRROR CONTROL MODULE CIRCUIT
Ignition switch OFF.
Disconnect passenger door mirror control module connector and BCM connector.
Check continuity between passenger door mirror control module harness connector and BCM harness connector.
Passenger door mirror control module BCM Continuity Connector Terminal Connector Terminal D108 7 M18 24 Yes Check continuity between passenger door mirror control module harness connector and ground.
Passenger door mirror control module — Continuity Connector Terminal D108 7 Ground No
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace harness.
REPLACE PASSENGER DOOR MIRROR CONTROL MODULE
Replace passenger door mirror control module. Refer to Removal and Installation.
Is the inspection result normal?
YES>>Inspection End.
NO>>GO TO 4.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
>>Inspection End.
Power Supply and Ground Circuit (smart Rear View Mirror) Nissan Pathfinder 2022
Diagnosis Procedure
CHECK FUSE
Ignition switch OFF.
Check that the following fuses are not blown (open):
Signal name Fuse No. Capacity Ignition power supply 4 10 A 40 10 A
Is the fuse blown (open)?
YES>>Replace the blown fuse after repairing the affected circuit.
NO>>GO TO 2.
CHECK SMART REAR VIEW MIRROR POWER SUPPLY CIRCUIT
Disconnect smart rear view mirror connector.
Ignition switch ON.
Check voltage between smart rear view mirror harness connector and ground.
+ — Voltage
(Approx.)Smart rear view mirror Connector Terminal R8 1 Ground Battery voltage 7
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace harness.
CHECK SMART REAR VIEW MIRROR GROUND CIRCUIT
Ignition switch OFF.
Check continuity between smart rear view mirror harness connector and ground.
Smart rear view mirror — Continuity Connector Terminal R8 2 Ground Yes
Is the inspection result normal?
YES>>Inspection End.
NO>>Repair or replace harness.
Passenger Door Mirror Control Module Nissan Pathfinder 5th Gen
Diagnosis Procedure
CHECK FUSE
Ignition switch OFF.
Check that the following fuse is not blown (open):
| Signal name | Fuse No. | Capacity |
|---|---|---|
| Ignition power supply | 45 | 10 A |
Is the fuse blown (open) ?
YES>>Replace the blown fuse after repairing the affected circuit.
NO>>GO TO 2.
CHECK PASSENGER DOOR MIRROR CONTROL MODULE POWER SUPPLY
Disconnect passenger door mirror control module connector.
Ignition switch ON.
Check voltage between passenger door mirror control module harness connector and ground.
(+) (−) Voltage
(Approx.)Passenger door mirror control module Connector Terminal D108 4 Ground Battery voltage
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace harness and check fuse.
CHECK LIN COMMUNICATION SIGNAL
Ignition switch OFF.
Connect passenger door mirror control module connector.
Ignition switch ON.
- Check signal between passenger door mirror control module harness connector and ground using an oscilloscope.
(+) (−) Signal
(Reference value)Passenger door mirror control module Connector Terminal D108 7 Ground 
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace harness.
CHECK PASSENGER DOOR MIRROR CONTROL MODULE CIRCUIT
Ignition switch OFF.
Disconnect passenger door mirror control module connector and door mirror RH connector.
Check continuity between passenger door mirror control module harness connector and door mirror RH harness connector.
Passenger door mirror control module Door mirror RH Continuity Connector Terminal Connector Terminal D108 8 D128 9 Yes 9 10 Check continuity between passenger door mirror control module harness connector and ground.
Passenger door mirror control module — Continuity Connector Terminal D108 8 Ground No 9
Is the inspection result normal?
YES>>GO TO 5.
NO>>Repair or replace harness.
CHECK PASSENGER DOOR MIRROR CONTROL MODULE GROUND CIRCUIT
Check continuity between passenger door mirror control module harness connector and ground.
| Passenger door mirror control module | — | Continuity | ||
|---|---|---|---|---|
| Connector | Terminal | |||
| D108 | 12 | Ground | Yes | |
Is the inspection result normal?
YES>>GO TO 6.
NO>>Repair or replace harness.
REPLACE DOOR MIRROR RH
Replace door mirror RH. Refer to Removal and Installation.
Is the inspection result normal?
YES>>Inspection End.
NO>>GO TO 7.
REPLACE PASSENGER DOOR MIRROR CONTROL MODULE
Replace passenger door mirror control module. Refer to Removal and Installation.
Is the inspection result normal?
YES>>Inspection End.
NO>>GO TO 8.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Is the inspection result normal?
YES>>Inspection End.
NO>>GO TO 9.
CHECK INTERMITTENT INCIDENT
Check intermittent incident. Refer to Intermittent Incident..
>>Inspection End.
Smart Rear View Mirror Circuit Nissan Pathfinder 5th Gen
Component Function Check
CHECK SMART REAR VIEW MIRROR OPERATION
Ignition switch ON.
Turn ON the power lever located at the bottom of the smart rear view mirror, and check that the image from the smart rear view mirror camera is displayed on the LCD monitor integrated in the smart rear view mirror.
Is the inspection result normal?
YES>>Inspection End.
NO>>Check smart rear view mirror circuit. Refer to Diagnosis Procedure.
Diagnosis Procedure
CHECK SMART REAR VIEW MIRROR CAMERA CIRCUIT
Ignition switch OFF.
Disconnect smart rear view mirror harness connector and smart rear view mirror camera harness connector.
Check continuity between smart rear view mirror harness connector and smart rear view mirror camera harness connector.
Smart rear view mirror Smart rear view mirror camera Continuity Connector Terminal Connector Terminal R6 13 D503 1 Yes
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace harness or connector.
CHECK SMART REAR VIEW MIRROR CAMERA GROUND CIRCUIT
Check continuity between smart rear view mirror camera harness connector and ground.
| Smart rear view mirror camera | (-) | Continuity | |
|---|---|---|---|
| Connector | Terminal | ||
| D503 | 2 | Ground | Yes |
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace harness or connector.
REPLACE SMART REAR VIEW MIRROR CAMERA
Replace smart rear view mirror camera.
Check smart rear view mirror system. Refer to Component Function Check.
Is the inspection result normal?
YES>>Inspection End.
NO>>GO TO 4.
REPLACE SMART REAR VIEW MIRROR
Replace smart rear view mirror. Refer to Removal and Installation.
Check smart rear view mirror system. Refer to Component Function Check.
Is the inspection result normal?
YES>>Inspection End.
NO>>To check malfunction symptom before repair. Refer to Intermittent Incident.
Door Mirror Remote Control Switch (mirror/select Switch) Nissan Pathfinder 2026
Component Inspection
CHECK MIRROR SWITCH & SELECT SWITCH
Ignition switch OFF.
Disconnect door mirror remote control switch connector.
Check door mirror remote control switch.
Door mirror remote control switch Condition Continuity Terminals Select switch Mirror switch Door mirror LH 21 10 LEFT RIGHT Yes 10 21 LEFT 6 21 UP 21 6 DOWN Door mirror RH 7 9 RIGHT RIGHT 9 7 LEFT 8 7 UP 7 8 DOWN
Is the inspection result normal?
YES>>Inspection End.
NO>>Replace main power window and door mirror switch. Refer to Removal and Installation.
Door Mirror Remote Control Switch (retractor Switch) Nissan Pathfinder 2022
Component Inspection
CHECK RETRACTOR SWITCH
Ignition switch OFF.
Disconnect door mirror remote control switch connector.
Check door mirror remote control switch.
WITHOUT ADP Door mirror remote control switch Condition Continuity Terminals LH side 17 18 Retractor switch OPEN Yes 18 17 CLOSE RH side 19 20 OPEN 20 19 CLOSE
Is the inspection result normal?
YES>>Inspection End.
NO>>Replace main power window and door mirror switch. Refer to Removal and Installation.