Meter, Warning Lamp & Indicator - Ecu Diagnosis Information
- Combination Meter
- Head up Display Unit
Combination Meter Nissan Pathfinder SUV
Values On The Diagnosis Tool
| Monitor Item | Condition | Value/Status | |
|---|---|---|---|
SPEED METER [mph or km/h] |
Ignition switch ON | While driving | Input value of Nissan Pathfinder vehicle speed signal (CAN communication signal) |
SPEED OUTPUT [mph or km/h] |
Ignition switch ON | While driving | Output value of Nissan Pathfinder vehicle speed signal (CAN communication signal) |
ODO OUTPUT [mph or km/h] |
Ignition switch ON | — | Output value of odometer signal (CAN communication signal) |
TACHO METER [rpm] |
Ignition switch ON | Engine running | Input value of engine speed signal (CAN communication signal) |
FUEL METER [L] |
Ignition switch ON | — | Input value of fuel level sensor signal |
W TEMP METER [°F or °C] |
Ignition switch ON | — | Input value of engine coolant temperature signal (CAN communication signal) |
| ABS W/L | Ignition switch ON | ABS warning lamp ON | On |
| ABS warning lamp OFF | Off | ||
| VDC/TCS IND | Ignition switch ON | VDC OFF indicator lamp ON | On |
| VDC OFF indicator lamp OFF | Off | ||
| SLIP IND | Ignition switch ON | VDC warning lamp ON | On |
| VDC warning lamp OFF | Off | ||
| BRAKE W/L | Ignition switch ON | Brake warning lamp ON | On |
| Brake warning lamp OFF | Off | ||
| E-PKB warning lamp | Ignition switch ON | Electric parking brake warning lamp ON | On |
| Electric parking brake warning lamp OFF | Off | ||
| HI-BEAM IND | Ignition switch ON | High beam indicator lamp ON | On |
| High beam indicator lamp OFF | Off | ||
| TURN IND | Ignition switch ON | Turn signal indicator lamp ON | On |
| Turn signal indicator lamp OFF | Off | ||
| FR FOG IND | Ignition switch ON | Front fog lamp indicator lamp ON | On |
| Front fog lamp indicator lamp OFF | Off | ||
| LIGHT IND | Ignition switch ON | Position lamp indicator lamp ON | On |
| Position lamp indicator lamp OFF | Off | ||
| OIL W/L | Ignition switch ON | During engine oil pressure warning indication | On |
| Except during engine oil pressure warning indication | Off | ||
| MIL | Ignition switch ON | Malfunction indicator lamp ON | On |
| Malfunction indicator lamp OFF | Off | ||
| BA W/L | Ignition switch ON | AEB warning lamp ON | On |
| AEB warning lamp OFF | Off | ||
| WASHER W/L | Ignition switch ON | During low washer warning indication | On |
| Except during low washer warning indication | Off | ||
| AIR PRES W/L | Ignition switch ON | Low tire pressure warning lamp ON | On |
| Low tire pressure warning lamp OFF | Off | ||
| EPS W/L | Ignition switch ON | Electric power steering warning lamp ON | On |
| Electric power steering warning lamp OFF | Off | ||
| DDS IND | Ignition switch ON | Off | |
| CHAGE W/L | Ignition switch ON | 12V battery charge warning lamp ON | On |
| 12V battery charge warning lamp OFF | Off | ||
| E-PKB indicator | Ignition switch ON | Electric parking brake indicator lamp ON | On |
| Electric parking brake indicator lamp OFF | Off | ||
| BRAKE OIL SW | Ignition switch ON | Brake fluid level switch ON | On |
| Brake fluid level switch OFF | Off | ||
| PASS BUCKLE SW | Ignition switch ON | Passenger seat belt not fastened | On |
| Passenger seat belt fastened | Off | ||
| CHG CONCT DET | Ignition switch ON | Off | |
DISTANCE [km] or [mile] |
Ignition switch ON | — | Distance to empty |
OUTSIDE TEMP [°C or °F] |
Ignition switch ON | — | Displays the ambient air temperature which is input from the ambient sensor. |
| BUZZER | Ignition switch ON | Buzzer ON | On |
| Buzzer OFF | Off | ||
| STRG SW INPUT | Ignition switch ON | Control switch is pressed | SW1 |
| Scroll dial is rotated upward | SW2 | ||
| Scroll dial is rotated downward | SW3 | ||
| OK switch is pressed | SW4 | ||
| LEFT/BACK switch is pressed | SW5 | ||
| RIGHT switch is pressed | SW6 | ||
| VOLUME DOWN switch is pressed | SW7 | ||
| VOLUME UP switch is pressed | SW8 | ||
| TEL switch is pressed | SW9 | ||
| VR switch is pressed | SW10 | ||
| SEEK DOWN switch is pressed | SW11 | ||
| SEEK UP switch is pressed | SW12 | ||
| Other than above | NO INPUT | ||
| HI-BEAM ASST IND | Ignition switch ON | High beam assist indicator lamp ON | On |
| High beam assist indicator lamp OFF | Off | ||
| DIPPED BEAM IND | Ignition switch ON | Off | |
| Engine Off timer | Ignition switch ON | 0 | |
| Nissan Pathfinder Vehicle distance | Ignition switch ON | 0 | |
| EAPM status | Ignition switch ON | No spprt | |
Reference Value
TERMINAL LAYOUT

PHYSICAL VALUES
Terminal No. (Wire color) | Description | Condition | Value (Approx.) | ||||
|---|---|---|---|---|---|---|---|
| + | – | Signal name | Input/ Output | ||||
1 (R) |
Ground | Illumination control signal | Output | Ignition switch ON |
|
![]() |
|
| — | Battery voltage | ||||||
|
![]() |
||||||
|
0 V | ||||||
3 (LA/G) |
Ground | Master speaker signal | Output | [Ignition switch ON]
|
Outputs waveform synchronized with sound. | ![]() |
|
4 (LA/L) |
Ground | Master speaker ground | — | Ignition switch ON | — | — | |
5 (LA/W) |
Ground | Battery power supply | Input | Ignition switch OFF | — | Battery voltage | |
6 (LA/BG) |
Ground | Ignition signal | Input | Ignition switch ON | — | Battery voltage | |
7 (B) |
Ground | Ground | — | — | — | 0 V | |
12 (GR) |
Ground | Nissan Pathfinder Vehicle speed signal (8-pulse) |
Output | Ignition switch ON | Speedometer operated [When Nissan Pathfinder vehicle speed is approx. 40 km/h] |
![]() |
|
15 (P) |
Ground | Washer fluid level switch signal | Input | Ignition switch ON | Washer fluid level switch ON | 0 V | |
| Washer fluid level switch OFF | Battery voltage | ||||||
18 (L) |
Ground | CAN-High | — | — | — | — | |
19 (R) |
Ground | CAN-Low | — | — | — | — | |
23 (BG) |
Ground | Steering switch signal B | Input | Ignition switch ON | Keep pressing VOLUME DOWN switch | 0 V | |
| Keep pressing VOLUME UP switch | 0.3 V | ||||||
| Keep pressing TEL switch | 0.6 V | ||||||
| Keep pressing VR switch | 1.1 V | ||||||
| Keep pressing SEEK DOWN switch | 2.0 V | ||||||
| Keep pressing SEEK UP switch | 3.3 V | ||||||
| Other than the above | 5.0 V | ||||||
25 (BR) |
Ground | Illumination control switch signal (+) | Input | Ignition switch ON | Illumination control switch (+) is pressed | 0 V | |
| Other than the above | 5.0 V | ||||||
28 (G) |
Ground | Brake fluid level switch signal | Input | Ignition switch ON | Brake fluid level low | 5.0 V | |
| Brake fluid level normal | Battery voltage | ||||||
29 (P) |
Ground | Ambient sensor signal | Input | Ignition switch ON | Changes depending to ambient temperature. | ![]() |
|
30 (LG) |
Ground | Ambient sensor ground | — | Ignition switch ON | — | 0 V | |
31 (Y) |
Ground | Illumination control switch signal (−) | Input | Ignition switch ON | Illumination control switch (−) is pressed | 0 V | |
| Other than the above | 5.0 V | ||||||
32 (G) |
Ground | Illumination control switch ground | — | Ignition switch ON | — | 0 V | |
33 (P) |
Ground | Steering switch signal A | Input | Ignition switch ON | Keep pressing control switch | 0 V | |
| Keep rotating scroll dial upward | 0.3 V | ||||||
| Keep rotating scroll dial downward | 0.6 V | ||||||
| Keep pressing OK switch | 1.1 V | ||||||
| Keep pressing LEFT/BACK switch | 2.0 V | ||||||
| Keep pressing RIGHT switch | 3.3 V | ||||||
| Other than the above | 5.0 V | ||||||
34 (GR) |
Ground | Steering switch ground | — | Ignition switch ON | — | 0 V | |
35 (LA/W) |
Ground | Fuel level sensor signal | Input | Ignition switch ON | Fuel gauge indication position | Full | Less than 94.5 Ω |
| 3/4 | 140 Ω | ||||||
| 1/2 | 186 Ω | ||||||
| 1/4 | 232 Ω | ||||||
| 1/8 | 255 Ω | ||||||
| Empty | More than 278 Ω | ||||||
36 (LA/R) |
Ground | Fuel level sensor ground | — | Ignition switch ON | — | 0 V | |
39 (LG) |
Ground | AV communication signal low | — | — | — | — | |
40 (SB) |
Ground | AV communication signal high | — | — | — | — | |
Fail-Safe
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
| Function | Specifications | ||
|---|---|---|---|
| Speedometer | Reset to zero by suspending communication. | ||
| Tachometer | |||
| Engine coolant temperature gauge |
|
||
| Illumination control |
|
||
| Information display | Odometer | An indicated value is maintained at communications blackout. | |
| Shift position indicator | The display turns OFF by suspending communication. | ||
| Trip computer | Current Nissan Pathfinder vehicle speed | Reset to zero by suspending communication. | |
| Current fuel consumption | The last result calculated during normal condition is indicated. | ||
| Average fuel consumption | |||
| Average Nissan Pathfinder vehicle speed | |||
| ECO pedal guide | The display turns OFF by suspending communication. | ||
| Buzzer | The buzzer turns OFF by suspending communication. | ||
| Warning lamp/indicator lamp | ABS warning lamp | The lamp turns ON by suspending communication. | |
| VDC warning lamp | |||
| Brake warning lamp | |||
| Electric power steering warning lamp | |||
| Malfunction indicator lamp (MIL) | |||
| 12V battery charge warning lamp | |||
| Engine oil pressure warning lamp | |||
| SRS air bag warning lamp | |||
| Electric shift warning lamp | |||
| AEB warning lamp | |||
| Electric parking brake warning lamp | |||
| Low tire pressure warning lamp |
|
||
| Electric parking brake indicator lamp | The lamp blinking caused by suspending communication. | ||
| High beam indicator lamp | The lamp turns OFF by suspending communication. | ||
| Hands OFF warning lamp | |||
| High beam assist indicator lamp | |||
| VDC OFF indicator lamp | |||
| Turn signal indicator lamp | |||
| Front fog lamp indicator lamp | |||
| Position lamp indicator lamp | |||
| Seat belt warning lamp | |||
| Automatic brake hold indicator lamp | |||
DTC Inspection Priority Chart
If multiple DTCs are detected simultaneously, check them one by one depending on the following DTC inspection priority chart.
B2231–16: BATTERY VOLTAGE
B2231–17: BATTERY VOLTAGE
B2223–1C: COMBINATION METER
U1010–49: CONTROL UNIT (CAN)
U1321–55: CONFIGURATION UNFINISHED
U2118–87: CAN COMM ERR (INTELLIGENT KEY)
U213D–87: CAN COMM ERR (ADB)
U2140–87: CAN COMM ERR (ECM)
U2141–87: CAN COMM ERR (TCM)
U2148–87: CAN COMM ERR (BRAKE CONTROL UNIT)
U214A–87: CAN COMM ERR (AWD/4WD)
U214F–87: CAN COMM ERR (BCM)
U2150–87: CAN COMM ERR (AIR BAG)
U2152–83: CAN COMM ERR (ADAS CONTROL UNIT)
U2152–87: CAN COMM ERR (ADAS CONTROL UNIT)
U2153–87: CAN COMM ERR (HVAC) CH1
U2154–87: CAN COMM ERR (MIU)
U2159–87: CAN COMM ERR (STEERING CONTROL UNIT)
U215B–87: CAN COMM ERR (IPDM E/R)
U2165–87: CAN COMM ERR (SONAR)
U2169-87: CAN COMM ERR (PSD/MHB)
U216B–87: CAN COMM ERR (FRONT CAMERA)
U216E–87: CAN COMM ERR (SIDE RADAR)
U2173–87: CAN COMM ERR (DISPLAY)
U2175–87: CAN COMM ERR (AVM)
U2176–87:CAN COMM ERR (CCM/ST ANGLE SENSOR)
U2193–87: CAN COMM ERR (ADP DRIVER SEAT)
B2205-29: Nissan Pathfinder Vehicle SPEED
B2205-87: VEHICLE SPEED
B2267-29: TACHO METER
B2267-87: TACHO METER
B2268-29: WATER TEMP METER
B2268-87: WATER TEMP METER
B226A-82: ADAS CLK
B2202-11: FUEL LEVEL SENSOR
B2202-13: FUEL LEVEL SENSOR
B220A-11: ILLUMINATION OUTPUT CIRCUIT
B220B-23: TRIP RESET SW
B220C-23: ILLUMINATION UP SW
B220D-23: ILLUMINATION DOWN SW
B2210-11: OUTSIDE TEMP SENSOR
B221A-23: STEERING SW INPUT1
B221B-23: STEERING SW INPUT2
B2227-86: AV COMMUNICATION
B2227-87: AV COMMUNICATION
DTC Index
| DTC | CONSULT display | Refer to |
|---|---|---|
| B2202-11 | Fuel level sensor | Refer to DTC Description. |
| B2202-13 | Fuel level sensor | Refer to DTC Description. |
| B2205-29 | Nissan Pathfinder Vehicle SPEED | Refer to DTC Description. |
| B2205-87 | Nissan Pathfinder Vehicle SPEED | Refer to DTC Description. |
| B220A-11 | ILLUMINATION OUTPUT CIRCUIT | Refer to DTC Description. |
| B220B-23 | Trip reset SW | Refer to DTC Description. |
| B220C-23 | Illumination up SW | Refer to DTC Description. |
| B220D-23 | Illumination down SW | Refer to DTC Description. |
| B2210-11 | Outside temp sensor | Refer to DTC Description. |
| B221A-23 | Steering SW input1 | Refer to DTC Description. |
| B221B-23 | Steering SW input2 | Refer to DTC Description. |
| B2223-1C | Combination meter | Refer to DTC Description. |
| B2227-86 | AV communication | Refer to DTC Description. |
| B2227-87 | AV communication | Refer to DTC Description. |
| B2231-16 | Battery voltage | Refer to DTC Description. |
| B2231-17 | Battery voltage | Refer to DTC Description. |
| B2267-29 | TACHO METER | Refer to DTC Description. |
| B2267-87 | TACHO METER | Refer to DTC Description. |
| B2268-29 | WATER TEMP METER | Refer to DTC Description. |
| B2268-87 | WATER TEMP METER | Refer to DTC Description. |
| B226A-82 | ADAS CLK | Refer to DTC Description . |
| U1010-49 | CONTROL UNIT (CAN) | Refer to DTC Description. |
| U1321–55 | Config unfinished | Refer to DTC Description. |
| DTC | CONSULT display | Refer to |
|---|---|---|
| U2118–87 | CAN comm err (Intelligent Key) | Refer to DTC Description. |
| U213D–87 | CAN comm err (ADB) | Refer to DTC Description. |
| U2140–87 | CAN comm err (ECM) | Refer to DTC Description. |
| U2141–87 | CAN comm err (TCM) | Refer to DTC Description. |
| U2148–87 | CAN comm err (brake control unit) | Refer to DTC Description. |
| U214A–87 | CAN comm err (AWD/4WD) | Refer to DTC Description. |
| U214F–87 | CAN comm err (BCM) | Refer to DTC Description. |
| U2150–87 | CAN comm err (AIR BAG) | Refer to DTC Description. |
| U2152–83 | CAN comm err (ADAS control unit) | Refer to DTC Description. |
| U2152–87 | CAN comm err (ADAS control unit) | Refer to DTC Description. |
| U2153–87 | CAN comm err (HVAC) ch1 | Refer to DTC Description. |
| U2154–87 | CAN COMM ERR (MIU) | Refer to DTC Description. |
| U2159–87 | CAN comm err (steering control unit) | Refer to DTC Description. |
| U215B–87 | CAN comm err (IPDM E/R) | Refer to DTC Description. |
| U2165–87 | CAN comm err (sonar) | Refer to DTC Description. |
| U2169–87 | CAN comm err (PSD/MHB) | Refer to DTC Description. |
| U216B–87 | CAN comm err (front camera) | Refer to DTC Description. |
| U216E–87 | CAN comm err (side radar) | Refer to DTC Description. |
| U2173–87 | CAN comm err (display) | Refer to DTC Description. |
| U2175–87 | CAN comm err (AVM) | Refer to DTC Description. |
| U2176–87 | CAN comm err (CCM/ST angle sensor) | Refer to DTC Description. |
| U2193–87 | CAN comm err (ADP driver seat) | Refer to DTC Description. |
Head up Display Unit Nissan Pathfinder R53
Values On The Diagnosis Tool
| Monitor item | Condition | Value/Status | |
|---|---|---|---|
| Main switch | [Ignition switch ON] | Head Up Display main switch is push | On |
| Other than above | Off | ||
| Backlight power | [Ignition switch ON] | 0 – 100.0 | |
| Light sensor intensity | [Ignition switch ON] | 0.0 – 100000.0 | |
| Display temperature | [Ignition switch ON] | –40 – 145 | |
| Mirror status | [Ignition switch ON] | Mirror is open | Open |
| Mirror is close | Close | ||
| Display status | [Ignition switch ON] | On | |
| Off | |||
| Login user No. | [Ignition switch ON] | Guest | |
| User1 | |||
| User2 | |||
| User3 | |||
| User4 | |||
| User5 | |||
| Keylink activation | [Ignition switch ON] | On | |
| Off | |||
| Backlight temp | [Ignition switch ON] | –40 – 145 | |
| TSR activation | [Ignition switch ON] | Unknown | |
| On | |||
| Off | |||
| Not Used | |||
| HUD mirror deployment | [Ignition switch ON] | HUD mirror is deployed | On |
| HUD mirror is not deployed | Off | ||
| IT activation | [Ignition switch ON] | Unknown | |
| On | |||
| Off | |||
| Not Used | |||
| TBT activation | [Ignition switch ON] | Unknown | |
| On | |||
| Off | |||
| Not Used | |||
| ADAS activation | [Ignition switch ON] | Unknown | |
| On | |||
| Off | |||
| Not Used | |||
| HUD activation | [Ignition switch ON] | Unknown | |
| On | |||
| Off | |||
| Not Used | |||
| Auto dimming | [Ignition switch ON] | On | |
| Off | |||
| TEL/SMS activation | [Ignition switch ON] | On | |
| Off | |||
| Ignition power supply | [Ignition switch ON] | On | |
| [Ignition switch OFF] | Off | ||
| Battery voltage | [Ignition switch OFF] | 6 - 18 | |
| Speed display request | [Ignition switch ON] | 0 - 253 | |
| Cruise disp | [Ignition switch ON] | Speed limit display :ON | SL On |
| Speed limit display :OFF | SL OFF | ||
| Speed limit display is malfunction. | SL error | ||
| Cruise control display :ON | CC On | ||
| Cruise control display :OFF | CC Off | ||
| Cruise control display is malfunction. | CC error | ||
| ASCD is not equipped | No equip | ||
| Other than above | Off | ||
| Over speed ind req (cruise) | [Ignition switch ON] | Over speed indicator (cruise) ON | On |
| Over speed indicator (cruise) OFF | Off | ||
| Over speed alert (SL) | [Ignition switch ON] | Over speed warning (speed limit) ON | On |
| Over speed warning (speed limit) OFF | Off | ||
| Converted speed display req | [Ignition switch ON] | Converted speed display ON | On |
| Converted speed display OFF | Off | ||
| Rain symbol display request | [Ignition switch ON] | Rain symbol display ON | On |
| Rain symbol display OFF | Off | ||
| Sub sign 2 | [Ignition switch ON] | Off | |
| Generic | |||
| Snow | |||
| Towing | |||
| Arrow L | |||
| Arrow R | |||
| Truck | |||
| Not Used | |||
| Traffic sign 3 | [Ignition switch ON] | Traffic Sign1 -29 | |
| Off | |||
| No over | |||
| End no | |||
| Sub sign 1 | [Ignition switch ON] | Off | |
| Generic | |||
| Snow | |||
| Towing | |||
| Arrow L | |||
| Arrow R | |||
| Truck | |||
| Not Used | |||
| Over speed display request | [Ignition switch ON] | Over speed display ON | On |
| Over speed display OFF | Off | ||
| Sub sign 3 | [Ignition switch ON] | Off | |
| Generic | |||
| Snow | |||
| Towing | |||
| Arrow L | |||
| Arrow R | |||
| Truck | |||
| Not Used | |||
| Speed sign display request | [Ignition switch ON] | Speed sign display ON | On |
| Speed sign display OFF | Off | ||
| Sign type 1 | [Ignition switch ON] | Traffic sign END | End |
| Other than above | Normal | ||
| Sign type 2 | [Ignition switch ON] | Traffic sign END | End |
| Other than above | Normal | ||
| Backlight | [Ignition switch ON] | Backlight :Daytime mode | Day |
| Backlight :Twilight mode | Twilight | ||
| Backlight :Night mode | Night | ||
| Other than above | Unknown | ||
| Nissan Pathfinder Vehicle warning status | [Ignition switch ON] | Nissan Pathfinder Vehicle warning ON | R3 |
| D3 | |||
| D3 R3 | |||
| Other than above | Off | ||
| Speed unit | [Ignition switch ON] | km/h | |
| MPH | |||
| Max night light | [Ignition switch ON] | 0.0 ‐ 100.0% | |
| External Temperature | [Ignition switch ON] | –50 ‐ 70 deg | |
| Nissan Pathfinder Vehicle speed display value | [Ignition switch ON] | 0 ‐ 510 km | |
| Up/down request | [Ignition switch ON]
|
UP switch is pushed | Up |
| DOWN switch is pushed | Down | ||
| Reset switch is pushed | Reset | ||
| Other than above | No req | ||
| Meter language | [Ignition switch ON] | Displays selected language. | |
| HUD rotation request | [Ignition switch ON]
|
HUD rotation is not requested | No req |
| HUD rotation request | Step1 ‐ 21 | ||
| Reset switch is pushed | Reset | ||
| Other than above | Not used | ||
| IT activation request | [Ignition switch ON] | IT activation request :ON | On |
| IT activation request :OFF | Off | ||
| IT activation request :Reset | Reset | ||
| Other than above | No req | ||
| TSR activation request | [Ignition switch ON] | TSR activation request :ON | On |
| TSR activation request :OFF | Off | ||
| TSR activation request :Reset | Reset | ||
| Other than above | No req | ||
| ADAS activation request | [Ignition switch ON] | ADAS activation request :ON | On |
| ADAS activation request :OFF | Off | ||
| ADAS activation request :Reset | Reset | ||
| Other than above | No req | ||
| TBT activation request | [Ignition switch ON] | Turn by turn activation request :ON | On |
| Turn by turn activation request :OFF | Off | ||
| Turn by turn activation request :Reset | Reset | ||
| Other than above | No req | ||
| TEL/SMS activation request | [Ignition switch ON] | TEL/SMS activation request :ON | On |
| TEL/SMS activation request :OFF | Off | ||
| TEL/SMS activation request :Reset | Reset | ||
| Other than above | No req | ||
| MM auto ACC 2 | [Ignition switch ON] | Displays the multimedia uto ACC status. | Down |
| Message | |||
| Manual | |||
| Work | |||
| Nissan Pathfinder Vehicle status | [Ignition switch ON] | Displays the Nissan Pathfinder vehicle status. | Sleep |
| Cut off | |||
| AutoACC | |||
| Ignition | |||
| Start | |||
| Auto | |||
| Stop | |||
| Other than above | Unknown | ||
| Delivery mode | [Ignition switch ON] | Displays the delivery mode. | Custom |
| Level1 | |||
| Level2 | |||
| Other than above | Not Used | ||
| GADE | [Ignition switch ON] | Displays the GADE type. | Type1 |
| Type2 | |||
| Type3 | |||
| Type4 | |||
| Type5 | |||
| Other than above | Unknown | ||
| Key link | [Ignition switch ON] | I-Key link number recognized by Head Up Display unit is displayed. | No.1 |
| No.2 | |||
| No.3 | |||
| No.4 | |||
| Other than above | No | ||
| User setting copy target | [Ignition switch ON] | Displays the user setting copy target. | No.1 |
| No.2 | |||
| No.3 | |||
| No.4 | |||
| No.5 | |||
| Guest | |||
| Other than above | Off | ||
| User setting copy source | [Ignition switch ON] | Displays the User setting copy source. | No.1 |
| No.2 | |||
| No.3 | |||
| No.4 | |||
| No.5 | |||
| Guest | |||
| Other than above | Off | ||
| User setting copy request | [Ignition switch ON] | User setting copy request :ON | On |
| Other than above | No req | ||
| User1 registration state | [Ignition switch ON] | User 1 registration :ON | On |
| Other than above | Off | ||
| User2 registration state | [Ignition switch ON] | User 2 registration :ON | On |
| Other than above | Off | ||
| User3 registration state | [Ignition switch ON] | User 3 registration :ON | On |
| Other than above | Off | ||
| Keylink activation | [Ignition switch ON] | Key link activation :ON | On |
| Other than above | Off | ||
| Key link initialization | [Ignition switch ON] | Key link initialization is in progress | Progress |
| Key link initialization is completed | Complet | ||
| User4 registration state | [Ignition switch ON] | User 4 registration :ON | On |
| Other than above | Off | ||
| User5 registration state | [Ignition switch ON] | User 5 registration :ON | On |
| Other than above | Off | ||
| Current user | [Ignition switch ON] | Displays the current user. | No.1 |
| No.2 | |||
| No.3 | |||
| No.4 | |||
| No.5 | |||
| Guest | |||
| FEB alert request | [Ignition switch ON] | AEB warning :ON | On |
| Other than above | No req | ||
| Driver warning status display | [Ignition switch ON] | Driver warning status display :ON | On |
| Driver warning status display :OFF | Off | ||
| Other than above | Not Used | ||
| LDW lane display | [Ignition switch ON] | LDW lane display :Right | Right |
| LDW lane display :Left | Left | ||
| LDW lane display :Left and right | Both | ||
| Other than above | Off | ||
| FEB cyclist alert req | [Ignition switch ON] | AEB cyclist alert :ON | On |
| Other than above | Off | ||
| FEB Nissan Pathfinder vehicle alert req | [Ignition switch ON] | AEB vehicle alert :Approach | Approach |
| AEB Nissan Pathfinder vehicle alert :Collision | Collision | ||
| AEB vehicle alert :OFF | Off | ||
| Other than above | Not Used | ||
| FEB pedestrian alert req | [Ignition switch ON] | AEB pedestrian alert :ON | On |
| Other than above | Off | ||
| ADAS mode display | [Ignition switch ON] | Driver assistance mode :ASCD | ASCD |
| Driver assistance mode :ICC | ICC | ||
| Driver assistance mode :ProPILOT Assist | PP | ||
| Other than above | Unknown | ||
| ICC status display | [Ignition switch ON] | ICC status display :ON | On |
| ICC status display :Wait | Wait | ||
| ICC status display :Suspend | Suspend | ||
| Other than above | Off | ||
| ICC malfunction display | [Ignition switch ON] | ICC temporary malfunction display :ON | Tempo |
| ICC permanent malfunction display :ON | Perma | ||
| ICC malfunction display :OFF | Off | ||
| Other than above | Not used | ||
| ICC target distance display | [Ignition switch ON] | ICC target distance display :Long | Long |
| ICC target distance display :Middle | Middle | ||
| ICC target distance display :Short | Short | ||
| ICC target distance display :Very short | V short | ||
| Other than above | Off | ||
| ICC speed override display | [Ignition switch ON] | ICC speed override display :ON | On |
| Other than above | Off | ||
| ICC distance override disp | [Ignition switch ON] | ICC distance override display :ON | On |
| Other than above | Off | ||
| ICC target distance alert | [Ignition switch ON] | ICC target distance alert :Approach | Approach |
| ICC target distance alert :Collision | Collision | ||
| ICC target distance alert :Cancel | Cancel | ||
| Other than above | Off | ||
| ICC dynamic target distance | [Ignition switch ON] | 0 – 255 | |
| ICC speed setting | [Ignition switch ON] | 0 – 255 | |
| ICC distance setting | [Ignition switch ON] | ICC distance setting :Long | Long |
| ICC distance setting :Middle | Middle | ||
| ICC distance setting :Short | Short | ||
| ICC distance setting :Very short | V short | ||
| Other than above | Off | ||
| LCA steering wheel display | [Ignition switch ON] | LCA steering wheel display :Cancel | Cancel |
| LCA steering wheel display :Temporary | Tempo | ||
| LCA steering wheel display :Active | Active | ||
| Other than above | Not used | ||
| LCA status display | [Ignition switch ON] | LCA status display :Not active | Not act |
| LCA status display :Active | Active | ||
| LCA status display :OFF | Off | ||
| Other than above | Not used | ||
| LCA override display | [Ignition switch ON] | LCA override display :ON | On |
| Other than above | Off | ||
| LCA malfunction display | [Ignition switch ON] | LCA temporary malfunction display :ON | Tempo |
| LCA permanent malfunction display :ON | Perma | ||
| LCA malfunction display :OFF | Off | ||
| Other than above | Not used | ||
| LDP alert status | [Ignition switch ON] | I-LI alert :Right | Right |
| I-LI alert :Left | Left | ||
| I-LI alert :OFF | Off | ||
| Other than above | Not used | ||
| Current calibration | [Ignition switch ON] | 1 – 6 | |
| Calibration status 1 | [Ignition switch ON] | Calibration 1 is adjusted | Adjusted |
| Other than above | No adjust | ||
| Calibration status 2 | [Ignition switch ON] | Calibration 2 is adjusted | Adjusted |
| Other than above | No adjust | ||
| Calibration status 3 | [Ignition switch ON] | Calibration 3 is adjusted | Adjusted |
| Other than above | No adjust | ||
| LDW alert status | [Ignition switch ON] | LDW alert :Right | Right |
| LDW alert :Left | Left | ||
| LDW alert :OFF | Off | ||
| Other than above | Not used | ||
| EAPM alert display | [Ignition switch ON] | EAPM alert display :ON | On |
| Other than above | Off | ||
Reference Value
TERMINAL LAYOUT

PHYSICAL VALUES
Terminal (Wire color) | Description | Condition | Value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | – | Signal name | Input/Output | |||
3 (GR) |
Ground | CAN-High | Input/Output | — | — | |
5 (V) |
Ground | CAN-Low | Input/Output | — | — | |
9 (LA/P) |
Ground | Ignition switch power supply | Supply | Ignition switch ON | Battery voltage | |
12 (SB) |
Ground | AV communication high | Input/Output | — | — | |
13 (P) |
Ground | Head up display switch | Input | Ignition switch ON | Battery voltage | |
14 (LG) |
Ground | AV communication low | Input/Output | — | — | |
16 (B) |
Ground | Ground | Input | Ignition switch ON | 0 V | |
Fail-safe
The Head Up Display (HUD) activates the fail-safe control according to the detected malfunction.
| DTC | Fail-safe condition |
|---|---|
| B22A0-46 | The mirror is shifted to the closed condition and the back light turned off and the operation is continued. |
| B22A0-49 |
|
| B22A0-4B | The mirror is shifted to the closed condition until the temperature of the TFT display drops to the specified temperature and the operation is continued. |
| B22A0-52 | No fail-safe (HUD display with default calibration value). |
| B22A0-54 | |
| B22A0-57 | |
| B22A1-23 | The HUD display can not be switched ON/OFF. |
| B22A2-A2 | — |
| B22A2-A3 | — |
| U2118-87 | CAN communication does not function. |
| U2140-87 | |
| U2148-87 | |
| U214E-87 | |
| U214F-87 | |
| U2152-87 | |
| U2154-87 | |
| U215B-87 | |
| U216B-87 |
Protection Function
LED protection function
The Head Up Display unit monitors the LED display temperature, and limits and protects the brightness of the backlight when the LED temperature becomes high temperature.
| Conditions | Function | Cancellation condition | |
|---|---|---|---|
| Head Up Display unit LED temperature | 248 °F (120 °C ) or higher | Decrease backlight brightness according to temperature rise | 221 °F (105 °C) or lower |
| 293 °F (145 °C) or higher | Completely turn off | ||
DTC Inspection Priority Chart
If multiple DTCs are detected simultaneously, check them one by one depending on the following DTC inspection priority chart.
B22A0-52 CONTROL UNIT
B22A0-54 CONTROL UNIT
B22A0-57 CONTROL UNIT
U2118-87 CAN COMM ERR (INTELLIGENT KEY)
U2140-87 CAN COMM ERR (ECM)
U2148-87 CAN COMM ERR (BRAKE CONTROL UNIT)
U214E-87 CAN COMM ERR (COMBINATION METER)
U214F-87 CAN COMM ERR (BCM)
U2152-87 CAN COMM ERR (ADAS CONTROL UNIT)
U2154-87 CAN COMM ERR (MIU)
U215B-87 CAN COMM ERR (IPDM E/R)
U216B-87 FRONT CAMERA COMM CIRCUIT
B22A0-46 CONTROL UNIT
B22A0-49 CONTROL UNIT
B22A0-4B CONTROL UNIT
B22A1‐23 MAIN SWITCH FIX
B22A2‐A2 BATTERY VOLTAGE
B22A2‐A3 BATTERY VOLTAGE
DTC Index
SELF-DIAGNOSIS RESULTS DISPLAY ITEM
| DTC | CONSULT display | Reference |
|---|---|---|
| B22A0-46 | Control unit | Refer to DTC Description. |
| B22A0-49 | Control unit | Refer to DTC Description. |
| B22A0-4B | Control unit | Refer to DTC Description. |
| B22A0-52 | Control unit | Refer to DTC Description. |
| B22A0-54 | Control unit | Refer to DTC Description. |
| B22A0-57 | Control unit | Refer to DTC Description. |
| B22A1-23 | Main switch fix | Refer to DTC Description. |
| B22A2-A2 | Battery voltage | Refer to DTC Description. |
| B22A2-A3 | Battery voltage | Refer to DTC Description. |
| DTC | CONSULT display | Reference |
|---|---|---|
| U2118-87 | CAN comm err (Intelligent Key) | Refer to DTC Description. |
| U2140-87 | CAN comm err (ECM) | Refer to DTC Description. |
| U2148-87 | CAN comm err (brake control unit) | Refer to DTC Description. |
| U214E-87 | CAN comm err (combination meter) | Refer to DTC Description. |
| U214F-87 | CAN comm err (BCM) | Refer to DTC Description. |
| U2152-87 | CAN comm err (ADAS control unit) | Refer to DTC Description. |
| U2154-87 | CAN comm err (MIU) | Refer to DTC Description. |
| U215B-87 | CAN comm err (IPDM E/R) | Refer to DTC Description. |
| U216B-87 | FRONT CAMERA COMM CIRCUIT | Refer to DTC Description. |




