Meter, Warning Lamp & Indicator - Symptom Diagnosis
- Meter System Symptoms
- Head up Display Symptoms
- Normal Operating Condition
Meter System Symptoms Nissan Pathfinder 2022
The Low Washer Fluid Warning Continues Displaying, or Does Not Display
Diagnosis Procedure
The warning is still displayed even after washer fluid is added.
The warning is not displayed even though the washer tank is empty.
CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT
Check the washer fluid level switch signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace harness or connector.
CHECK WASHER FLUID LEVEL SWITCH
Check the washer fluid level switch. Refer to Component Inspection.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Replace washer fluid level switch. Refer to Removal and Installation.
The Fuel Gauge Indicator Does Not Operate
Description
Fuel gauge will not indicate from a certain position.
Diagnosis Procedure
PERFORM COMBINATION METER SELF-DIAGNOSIS MODE
Perform the self-diagnosis mode of combination meter, and then check that the fuel gauge operates normally. Refer to On Board Diagnosis Function.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace the combination meter. Refer to Removal and Installation.
CHECK FUEL LEVEL SENSOR UNIT CIRCUITS
Check the fuel level sensor circuits. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace malfunctioning part.
CHECK FUEL LEVEL SENSOR UNIT
Check the fuel level sensor unit. Refer to Component Inspection.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Replace fuel level sensor unit. Refer to Removal and Installation.
CHECK FLOAT INTERFERENCE
Check that the float arm does not interfere with or bind to other components in the fuel tank.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Replace fuel level sensor unit. Refer to Removal and Installation.
The Steering Switches Are Inoperative
Description
If any of the following malfunctions is found for the steering switch operation.
All switches are inoperative
The specified switch cannot be operated
Diagnosis Procedure
CHECK STEERING SWITCH SIGNAL A CIRCUIT
Check the steering switch signal A circuit. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace malfunctioning parts.
CHECK STEERING SWITCH SIGNAL B CIRCUIT
Check the steering switch signal B circuit. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace malfunctioning parts.
CHECK STEERING SWITCH
Check steering switch resistance. Refer to Component Inspection (steering switch signal A) or Component Inspection (steering switch signal B).
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Replace steering switch. Refer to Removal and Installation.
The Illumination Control Switch Is Inoperative
Description
If any of the following malfunctions is found for the illumination control switch operation.
All switches are inoperative
The specified switch cannot be operated
Diagnosis Procedure
CHECK ILLUMINATION CONTROL SWITCH SIGNAL CIRCUIT
Check the illumination control switch signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair harness or connector.
CHECK ILLUMINATION CONTROL SWITCH
Perform a unit check for the illumination control switch. Refer to Component Inspection.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NG>>Replace illumination control switch. Refer to Removal and Installation.
The Master Speaker Does Not Sound
Description
The meter speaker does not sound.
Diagnosis Procedure
CHECK COMBINATION METER INPUT SIGNAL
CONSULT
Select “BUZZER” in “Data Monitor” mode of “METER/M&A”.
Check that the function operates normally according to the following conditions:
Monitor item Condition Status BUZZER Under the condition of buzzer input ON Except above OFF
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace BCM. Refer to Removal and Installation.
CHECK MASTER SPEAKER CIRCUIT
Check master speaker circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Repair or replace malfunctioning parts.
The Ambient Temperature Display Is Incorrect
Description
The displayed ambient air temperature is higher than the actual temperature.
The displayed ambient air temperature is lower than the actual temperature.
Diagnosis Procedure
CHECK AMBIENT SENSOR SIGNAL CIRCUIT
Check the ambient sensor signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace malfunctioning parts.
CHECK AMBIENT SENSOR
Check the ambient sensor. Refer to Component Inspection.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Replace ambient sensor. Refer to Removal and Installation.
Head up Display Symptoms Nissan Pathfinder R53
Head up Display Screen Is Not Displayed
Diagnosis Procedure
CHECK HEAD UP DISPLAY SWITCH OPERATION
CONSULT
Ignition switch ON.
Select "Main switch" in "Data Monitor" mode of "E-HUD".
Check that the function operates normally according to the following conditions:
Monitor item Condition Indication Main switch Head Up Display switch Press the switch On Except above Off
Is the inspection result normal?
YES>>GO TO 2.
NO>>GO TO 3.
CHECK HEAD UP DISPLAY UNIT POWER SUPPLY CIRCUIT
Check the head up display unit power supply circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace head up display unit. Refer to Removal and Installation.
NO>>Repair or replace malfunctioning parts.
CHECK HEAD UP DISPLAY SWITCH SIGNAL CIRCUIT
Ignition switch OFF.
Disconnect head up display unit harness connector and head up display switch harness connector.
Check the continuity between head up display unit harness connector and head up display switch harness connector
Head up display unit Head up display switch Continuity Connector Terminal Connector Terminal M107 13 M118 6 Yes
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace harness or connector.
CHECK HEAD UP DISPLAY SWITCH
Check the head up display switch. Refer to Component Inspection.
Is the inspection result normal?
YES>>Replace head up display unit. Refer to Removal and Installation.
NO>>Replace head up display switch. Refer to Removal and Installation.
Head up Display Brightness Is Not Changed
Diagnosis Procedure
CHECK HEAD UP DISPLAY BRIGHTNESS ADJUSTMENT SIGNAL
CONSULT
Select "Display brightness" in "Data Monitor" mode of "E-HUD".
Check that the function operates normally according to the following conditions:
Monitor item Condition Indication Display brightness Press brightness adjustment on the combination meter setting screen. The display changes from (-10) to (10)
Is the inspection result normal?
YES>>Replace head up display unit. Refer to Removal and Installation.
NO>>Check combination meter self diagnosis result. Refer to DTC Index.
Head up Display Screen Is Not Displayed in the Correct Position
Diagnosis Procedure
CHECK HEAD UP DISPLAY POSITION ADJUSTMENT SIGNAL
CONSULT
Select "Data Monitor" mode of "E-HUD".
Check that the function operates normally according to the following conditions:
Monitor item Condition Indication Display up and down status Press each position adjustment on the combination meter setting screen. The display changes to (-10) - (10) Display rotation status The display changes to (-10) - (10)
Is the inspection result normal?
YES>>Replace head up display unit. Refer to Removal and Installation.
NO>>Check combination meter self diagnosis result. Refer to DTC Index.
Normal Operating Condition Nissan Pathfinder
Information Display
Description
DISTANCE TO EMPTY
The calculated distance to empty may differ from the actual distance to empty if the refueling amount is approximately 4
(1 US gal,7/8 Imp gal) or less. This is because the refuel control (moves the fuel gauge needle quicker than normal judging that the driver is refueling the Nissan Pathfinder vehicle) is not performing.
AMBIENT TEMPERATURE
The displayed ambient temperature on the information display may differ from the actual temperature because it is a corrected value calculated from the ambient sensor signal by the combination meter. Refer to System Description for details on the correction process.
Head up Display
Symptom Description
The head up display unit controls and protects the backlight and display when the LED temperature becomes high. Refer to Protection Function.