Anti-lock brake system
In this manual: Anti-lock brake system
~2min read
Safety information and repair notes
Safety information
Observe safety information ⇒ Safety information and repair notes; Rep. gr. 00; Safety information.
Repair instructions
Observe repair instructions ⇒ Safety and repair instructions; Rep. gr. 00; Repair instructions.
Overview of fitting locations
Overview of fitting locations - ABS/ESP
Overview shows left-hand drive vehicle as an example
- ABS control unit - J104-/ABS hydraulic unit - N55-
- Fitting location for righthand drive vehicles: in vehicle front end on front passenger side
- ⇒ Rep. gr. 45; Assembly overview - control unit and hydraulic unit
- ⇒ Rep. gr. 45; Removing and installing ABS control unit [J104]/ABS hydraulic unit [N55]

- Display unit for front information display and operating unit control unit -J685-
- ⇒ Communication; Rep. gr. 91; Components/control units; Removing and installing control unit for front display and information control panel [J685]
- Rear right speed sensor -G44-/rear left speed sensor -G46
- ⇒ Rep. gr. 45; Assembly overview - speed sensors on rear axle
- ⇒ Rep. gr. 45; Removing and installing speed sensor on rear axle [G44]/[G46]
- Front right speed sensor -G45-/front left speed sensor -G47-
- ⇒ Rep. gr. 45; Assembly overview - speed sensor on front axle
- ⇒ Rep. gr. 45; Removing and installing speed sensor on front axle [G45]/[G47]
- Power steering control unit -J500-
- With steering angle sender -G85- in steering rack
- Cannot be replaced individually
- G85
- ⇒ Running gear, axles, steering; Rep. gr. 48; Steering rack; Removing and installing steering rack, all-wheel drive
- ⇒ Running gear, axles, steering; Rep. gr. 48; Steering rack; Removing and installing steering rack, rear-wheel drive
- Brake servo
- ⇒ Rep. gr. 47; Assembly overview - brake servo/brake master cylinder
- ⇒ Rep. gr. 47; Removing and installing brake servo
Was this page helpful?