Final drive - differential
In this manual: Final drive - differential
2steps
~12min
1/5difficulty
Done 0 of 2
Safety information and repair notes
Safety information
Observe safety information ⇒ Safety information and repair notes; Rep. gr. 00 ; Safety information .
Repair instructions
Observe repair instructions ⇒ Safety and repair instructions; Rep. gr. 00 ; Repair instructions .
Oil seals
Assembly overview - seals
- Three-phase current drive 2 - VX97- with gearbox
- Seal for right drive shaft
- Renew after removing
- ⇒ Rep. gr. 39 ; Renewing right seal
- Left drive shaft seal
- Renew after removing
- ⇒ Rep. gr. 39 ; Renewing left seal

Renewing left seal
Special tools and workshop equipment required
- hook - VW771/37-
- multi-purpose tool - VW771-
- thrust piece - T10627-
Removing
- Remove left drive shaft ⇒ Running gear, axles, steering; Rep. gr. 40 ; Drive shaft; Removing and installing drive shafts .
- Use hook - VW771/37- -A- and multi-purpose tool - VW771- -B- to pull seal -arrow- out of gearbox -1-.

Installing
- Half-fill space between sealing lip and dust lip -arrow- with sealing grease.
Sealing grease ⇒ Electronic parts catalogue (ETKA)

- Use thrust piece - T10627- -C- to drive in seal to stop, being careful to keep seal straight.

- Install left drive shaft ⇒ Running gear, axles, steering; Rep.
gr. 40 ; Drive shaft; Removing and installing drive shaft
Renewing right seal, left-hand drive vehicles
Removal and installation are described for the left vehicle side as an example ⇒ Rep. gr. 39 ; Renewing left seal .
Renewing right seal, right-hand drive vehicles
Special tools and workshop equipment required
- hook - VW771/37-
- multi-purpose tool - VW771-
- thrust piece - T10481-
- thrust piece - T10627-
Removing
- Remove right drive shaft ⇒ Running gear, axles, steering; Rep. gr. 40 ; Drive shaft; Removing and installing drive shaft .
- Use hook - VW771/37- -A- and multi-purpose tool - VW771- -B- to pull seal -arrow- out of gearbox -1-.

Installing
- Half-fill space between sealing lip and dust lip -arrow- with sealing grease.
Sealing grease ⇒ Electronic parts catalogue (ETKA)

- Use thrust piece - T10627- -C- and thrust piece - T10481- -D- to drive in seal to stop, being careful to keep seal straight.

- Install right drive shaft ⇒ Running gear, axles, steering; Rep. gr. 40 ; Drive shaft; Removing and installing drive shaft .
Was this page helpful?