Voltage converter
- Assembly overview - voltage converter, rear-wheel drive
- Assembly overview - voltage converter, all-wheel drive
- Removing and installing voltage converter, rear-wheel drive
- Removing and installing voltage converter, all-wheel drive
Assembly overview - voltage converter, rear-wheel drive
Assembly overview - voltage converter

- Voltage converter - A19-
- ⇒ Rep. gr. 93 ; Removing and installing voltage converter [A19]
- Bolt
- Tightening sequence: "diagonal sequence"
- Qty. 4
- M6×25
- 8 N·m
- Coolant connections
- High-voltage electrical connectors
- 12 V voltage supply
- Positive terminal
- 20 N·m
- 12 V voltage supply
- Negative terminal
- 20 N·m
Assembly overview - voltage converter, all-wheel drive
Assembly overview - voltage converter

- Coolant connection
- Electrical connector for electrical system
- 12 V voltage supply
- Positive terminal
- 8 N·m
- High-voltage electrical connector
- Coolant connection
- 12 V voltage supply
- Negative terminal
- 20 N·m
- Nut
- Qty. 4
- 8 N·m
- Voltage converter - A19-
- ⇒ Rep. gr. 93 ; Removing and installing voltage converter [A19]
Removing and installing voltage converter, rear-wheel drive
Removing and installing voltage converter
Special tools and workshop equipment required
- drip tray for workshop hoist - VAS 6208-
- hose clamps, up to Ø 25mm - 3094-
Voltage converter - A19- is referred to hereafter as voltage converter.
Removing
DANGER
High voltage can cause fatal injury.
Danger of severe or fatal injuries from electric shock or electric arcs.
Have a high-voltage technician (HVT) or a high-voltage expert (HVE) de-energise the high-voltage system.
⇒ Rep. gr. 93 ; De-energise high-voltage system .
If the voltage converter is to be renewed, perform the test plan for renewal of the control unit:
- Carry out function "Renew control unit" using ⇒ Vehicle diagnostic tester ⇒ Rep. gr. 00 ; Access to diagnoses .
Continued
- Remove air intake unit of heater and air conditioning unit ⇒ Heating, air conditioning; Rep. gr. 87 ; Front heater and air conditioning unit; Removing and installing air intake box of heater and air conditioning unit .
- Disconnect battery ⇒ Electrical system; Rep. gr. 27 ; Battery; Disconnecting and connecting battery .
- Place drip tray for workshop hoist - VAS 6208- under front of vehicle.
- Clamp off coolant hoses using hose clamps, up to Ø 25mm - 3094- .
- Detach clamps -2-, and pull off coolant hoses.

- Disconnect high-voltage electrical connector -3- from voltage converter.
- Fold up positive cable cap -5-.
- Unscrew bolts -4-.
- Unscrew bolts -arrows-.

Installing
Install in reverse order of removal, observing the following:
- ⇒ Rep. gr. 19 ; Cooling system/coolant; Filling cooling system
If the voltage converter has been renewed, perform the test plan for renewal of the control unit:
- Carry out function "Renew control unit" using ⇒ Vehicle diagnostic tester ⇒ Rep. gr. 00 ; Access to diagnoses .
Continued
WARNING
High voltage can cause fatal injury.
Danger of severe or fatal injuries from electric shock or electric arcs.
- Have a high-voltage technician (HVT) or a high-voltage expert (HVE) re-energise the high-voltage system.
- ⇒ Rep. gr. 93 ; Re-energise high-voltage system .
Tightening torques
- ⇒ Rep. gr. 93 ; Assembly overview - voltage converter
Removing and installing voltage converter, all-wheel drive
Removing and installing voltage converter
The voltage converter - A19- will henceforth be referred to as "voltage converter".
The charging unit 1 for high-voltage battery - AX4- will henceforth be referred to as "charging unit".
Removing
DANGER
High voltage can cause fatal injury.
Danger of severe or fatal injuries from electric shock or electric arcs.
- Have a high-voltage technician (HVT) or a high-voltage expert (HVE) de-energise the high-voltage system.
⇒ Rep. gr. 93 ; De-energise high-voltage system
If the voltage converter is to be renewed, perform the test plan for renewal of the control unit:
- Carry out function "Renew control unit" using ⇒ Vehicle diagnostic tester ⇒ Rep. gr. 00 ; Access to diagnoses .
Continued
- Disconnect battery ⇒ Electrical system; Rep. gr. 27 ; Battery; Disconnecting and connecting battery .
- Remove charging unit ⇒ Rep. gr. 93 ; Removing and installing charging unit 1 for high-voltage battery [AX4] .
- Unscrew bolts -1-.
- Detach voltage converter with bracket -2- from charging unit.

- Unscrew bolt -3-.
- Unscrew nuts -4-.
- Detach bracket -5- from voltage converter -1-.

Installing
Install in reverse order of removal, observing the following:
If the voltage converter has been renewed, perform the test plan for renewal of the control unit:
- Carry out function "Renew control unit" using ⇒ Vehicle diagnostic tester ⇒ Rep. gr. 00 ; Access to diagnoses .
Continued
WARNING
High voltage can cause fatal injury.
Danger of severe or fatal injuries from electric shock or electric arcs.
- Have a high-voltage technician (HVT) or a high-voltage expert (HVE) re-energise the high-voltage system.
⇒ Rep. gr. 93 ; Re-energise high-voltage system .
Tightening torques
- ⇒ Rep. gr. 93 ; Assembly overview - voltage converter