Bonding plastic attachments
In this manual: Bonding plastic attachments
~4min read
Bonding crack up to length of 100 mm
- ⇒ Rep. gr. 52 ; Repair deformations
Important
- Both sides of the crack must face each other in relieved condition.
- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products
- Sand repair area with a commercially available angle grinder -A- and P80 grit sandpaper.
Note
The size of the widening surface depends on the size and material thickness of the body attachment.

- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .
- Sand repair area with a commercially available orbital sander -A- and P120 grit sandpaper.
- Blow out sanding residues.
- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .

- Apply primer -A- ⇒ Rep. gr. 52 ; Processing instructions - original products .

- Measure and adapt fabric -1-.
Important
- Fabric -1- must generously cover the crack in the body attachment -2-.

- Apply 2 cm of adhesive bead -arrow- on test piece.
- Make sure that both components of the plastic adhesive -Aare completely mixed.
- Apply plastic adhesive -A- ⇒ Rep. gr. 52 ; Processing instructions - original products .

- Position fabric -1-, press it on with a commercially available spatula -A-, and spread applied plastic adhesive.

- Apply plastic adhesive -A- on fabric -1- ⇒ Rep. gr. 52 ; Processing instructions - original products .
- Use a commercially available spatula to spread adhesive bead -arrow-.

- Clean outer side of repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .
- Apply plastic adhesive, and use a commercially available spatula -A- to spread adhesive bead -arrow-.

- Sand repair area with a commercially available orbital sander -A- and P150 grit sandpaper.
- Blow out sanding residues.
- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .

Bonding scratches
If plastic attachments are deformed:
- ⇒ Rep. gr. 52 ; Repair deformations .
Continued
- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products
- Sand repair area with an orbital sander -A- and P120 grit sandpaper.
- Blow out sanding residues.
- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .

- Apply primer -A- ⇒ Rep. gr. 52 ; Processing instructions - original products

- Apply 2 cm of adhesive bead -arrow- on test piece.
- Make sure that both components of the plastic adhesive -Aare completely mixed.
- Apply plastic adhesive -A- ⇒ Rep. gr. 52 ; Processing instructions - original products .
- Use a commercially available spatula to spread adhesive bead -arrow-.

- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .
- Sand repair area with an orbital sander -A- and P150 grit sandpaper.
- Blow out sanding residues.
- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .

Bonding holes up to a diameter of 30 mm
- Rep. gr. 52 ; Preparing plastic repairs .
Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .
- Sand repair area with an orbital sander -A- and P120 grit sandpaper.
- Blow out sanding residues.
- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .

- Apply primer -A- ⇒ Rep. gr. 52 ; Processing instructions - original products .

- Apply 2 cm of adhesive bead -arrow- on test piece.
- Make sure that both components of the plastic adhesive are completely mixed.
- Apply plastic adhesive ⇒ Rep. gr. 52 ; Processing instructions - original products .
- Use a commercially available spatula to spread adhesive bead -arrow-.

- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .
- Sand repair area with a commercially available orbital sander -A- and P150 grit sandpaper.
- Blow out sanding residues.
- Clean repair area with plastic cleaner ⇒ Rep. gr. 52 ; Processing instructions - original products .

Was this page helpful?