Overview of fitting locations - air conditioning system, R134a/R1234yf
In this manual: Overview of fitting locations - air conditioning system, R134a/R1234yf
~4min read
- Overview of fitting locations - components not located in vehicle interior
- Overview of fitting locations - components not located in vehicle interior
Overview of fitting locations - components not located in vehicle interior
- Condenser
- ⇒ Rep. gr. 87 ; Assembly overview - condenser
- ⇒ Rep. gr. 87 ; Removing and installing condenser
- Air conditioner compressor - VX81-
- With electrical air conditioner compressor - V470- and control unit for air conditioner compressor - J842-
- ⇒ Rep. gr. 87 ; Removing and installing air conditioner compressor VX81
- Pressure sender for refrigerant circuit - G805
- ⇒ Rep. gr. 87 ; Removing and installing pressure sender for refrigerant circuit G805
- Refrigerant pressure and temperature sender - G395-
- ⇒ Rep. gr. 87 ; Removing and installing refrigerant pressure and temperature sender G395
- Heat exchanger for highvoltage battery with refrigerant expansion valve 1 - N636-
- ⇒ Rep. gr. 87 ; Removing and installing heat exchanger for high-voltage battery
- Service connection (low-pressure side)
- ⇒ Rep. gr. 87 ; Removing and installing evacuating and charging valve (low-pressure and high-pressure sides)

- Refrigerant shut-off valve for heater and air conditioning unit - N541
- ⇒ Rep. gr. 87 ; Removing and installing refrigerant shut-off valve for heater and air conditioning unit N541
- Service connection (high-pressure side)
- ⇒ Rep. gr. 87 ; Removing and installing evacuating and charging valve (low-pressure and high-pressure sides)
- Air intake box of heater and air conditioning unit
- ⇒ Rep. gr. 87 ; Removing and installing air intake box of heater and air conditioning unit
- External air quality and air humidity sensor - G935-
- ⇒ Rep. gr. 87 ; Removing and installing external air quality and air humidity sensor G935
- Fresh air intake
- ⇒ Rep. gr. 87 ; Removing and installing fresh air intake
- Fresh air blower control unit - J126-
- ⇒ Rep. gr. 87 ; Removing and installing fresh air blower control unit J126
- Control motor for fresh air and air recirculation flap - VX96-
- ⇒ Rep. gr. 87 ; Removing and installing control motor for fresh air and air recirculation flap VX96
- PTC heater element 3 - Z132-
- ⇒ Rep. gr. 87 ; Removing and installing heater element 3 Z132
- Desiccant bag
- ⇒ Rep. gr. 87 ; Removing and installing desiccant bag/dryer
- Ambient temperature sensor - G17-
- ⇒ Rep. gr. 87 ; Removing and installing ambient temperature sensor G17
Overview of fitting locations - components not located in vehicle interior
Overview shown for a left-hand drive vehicle as an example
- Left vent temperature sender - G150-
- ⇒ Rep. gr. 87 ; Removing and installing left vent temperature sender [G150[
- Rain and light sensor - G397-
- With humidity sender for air conditioning system - G260-
- With photosensor - G107-
- ⇒ Electrical system; Rep. gr. 92 ; Windscreen wiper system; Removing and installing rain and light sensor [G397]
- Control motor
- Shown as an example for all control motors
- ⇒ Rep. gr. 87 ; Overview of fitting locations - front control motors
- Heating condenser
- Depending on equipment/ version
- ⇒ Rep. gr. 87 ; Removing and installing heat condenser
- Evaporator
- ⇒ Rep. gr. 87 ; Removing and installing evaporator

- Evaporator temperature sensor - G308-
- ⇒ Rep. gr. 87 ; Removing and installing evaporator temperature sensor [G308]
- Heater and air conditioning system control unit - J979-
- Right-hand drive vehicle: mirror image
- ⇒ Rep. gr. 87 ; Removing and installing heater and air conditioning system control unit [J979]
- Condensation drain hose
- ⇒ Rep. gr. 87 ; Checking condensation drain
- ⇒ Rep. gr. 87 ; Removing and installing condensation drain
- Right vent temperature sender - G151-
- ⇒ Rep. gr. 87 ; Removing and installing right vent temperature sender [G151]
- Right footwell vent temperature sender - G262-
- Rep. gr. 87 ; Removing and installing right footwell vent temperature sender [G262]
- Sensor for interior carbon dioxide concentration - G929-
- Depending on equipment/version
- ⇒ Rep. gr. 87 ; Removing and installing sensor for interior carbon dioxide concentration [G929]
- High-voltage heater (PTC) - ZX17-
- With high-voltage heater (PTC) control unit - J848-
- With high-voltage heater (PTC) - Z115-
- ⇒ Rep. gr. 87 ; Removing and installing high voltage heater (PTC) [ZX17]
- Vehicle interior temperature sensor - G1090-
- ⇒ Rep. gr. 87 ; Removing and installing vehicle interior temperature sensor [G1090]
- Display unit for front information display and operating unit control unit - J685-
- ⇒ Rep. gr. 87 ; Removing and installing display unit for front information display and operating unit control unit [J685]
- Left footwell vent temperature sender - G261-
- ⇒ Rep. gr. 87 ; Removing and installing left footwell vent temperature sender [G261]
- Rear vent temperature sender - G174-
- Depending on equipment/version
- ⇒ Rep. gr. 87 ; Removing and installing rear vent temperature sender [G174]
- Operating and display unit for rear air conditioning system - E265-
- Depending on equipment/version
- ⇒ Rep. gr. 87 ; Removing and installing operating and display unit for rear air conditioning system [E265]
Was this page helpful?