Final drive - differential
In this manual: Final drive - differential
2steps
~12min
1/5difficulty
Done 0 of 2
Safety information and repair notes
Safety information
Observe safety information ⇒ Safety information and repair notes; Rep. gr. 00 ; Safety information .
Repair instructions
Observe repair instructions ⇒ Safety and repair instructions; Rep. gr. 00 ; Repair instructions .
Seals
Assembly overview seals
- Three-phase current drive - VX54- with gearbox
- Left drive shaft seal
- Renew after removing
- ⇒ Rep. gr. 39 ; Renewing left seal
- Seal for right drive shaft
- Renew after removing
- ⇒ Rep. gr. 39 ; Renewing right seal

Renewing left seal
Special tools and workshop equipment required
- multi-purpose tool - VW771-
- puller hook - VW771/37-
- thrust piece - T10481-
Removing
- Remove left drive shaft ⇒ Running gear, axles, steering; Rep. gr. 42 ; Drive shaft; Removing and installing drive shafts .
- Use puller hook - VW771/37- -1- and multi-purpose tool - VW771- -2- to pull out seal -arrow-.

Installing
- Half-fill space between sealing lip and dust lip -arrow- with sealing grease.
Sealing grease ⇒ Electronic parts catalogue (ETKA)

- Drive in new seal to stop using thrust piece - T10481- -1- keeping the seal absolutely straight in the process.

- Install left drive shaft ⇒ Running gear, axles, steering; Rep.
gr. 42 ; Drive shaft; Removing and installing drive shaft .
- ⇒ Rep. gr. 34 ; Check gear oil level .
Renewing right seal
Removal and installation are described for the left vehicle side as an example ⇒ Rep. gr. 39 ; Renewing left seal .
Was this page helpful?