System Description - Diagnosis System (combination Meter) ++
On Board Diagnosis Function
ON BOARD DIAGNOSIS ITEM
The following meter functions can be checked during combination meter self-diagnosis mode:
Pointer sweep of speedometer, tachometer and gauges.
Illumination of color patterns for meter displays.
Illumination of all lamps/LEDs that are controlled by the combination meter (regardless of switch status).
Error code
METHOD OF STARTING
How to Initiate Self-Diagnosis Mode
Ignition switch OFF.
While pressing the control switch (1), place ignition switch ON.

Keep pressing the control switch for 1 seconds or more.
Press the control switch at least 3 times. (Within 7 seconds after placing the ignition switch ON.)
“Work instruction code” is indicated in the top portion of information display and self-diagnosis is started.
Combination meter power supply and ground circuits. Refer to Diagnosis Procedure.
Steering switch signal circuits. Refer to Component Function Check.
The mode switches in the order shown below each time the control switch is pressed.
| Test order | Test item | Description | |
|---|---|---|---|
| 1 | Work instruction code | This item is displayed, but not used. | |
| 2 | Spare parts No. | ||
| Soft ware code | |||
| Flash rom No. | |||
| 3 | EEPROM code | ||
| 4 | Hardware code | ||
| 5 | PCB code | ||
| 6 | Circuit check | The pointer of the following items moves from 0 to MAX then from MAX to 0.
|
|
| 7 – 10 | Color check | Performs the color check of the information display. | |
| 11 | Error code* | Displays the error code of the following items.
|
|
| 12 | Warning/indicator lamp check | All warning/indicator lamp illuminate. | |
*: Error Code

| Item | Code | Description | Action to take/Reference | |
|---|---|---|---|---|
| Speedometer | 0 | Normal | — | |
| 1 | A Nissan Pathfinder vehicle speed signal can not be received from ECM. | Select “Self Diagnostic Result” of “ENGINE.” Refer to DTC Index. |
||
| 2 | A Nissan Pathfinder vehicle speed signal received from ECM is abnormal. (FFFFh) | |||
| Tachometer | 0 | Normal | — | |
| 1 | An engine speed signal cannot be received from ECM. | Select “Self Diagnostic Result” of “ENGINE.” Refer to DTC Index. |
||
| Fuel gauge | 0 | Normal | — | |
| 1 | Fuel gauge circuit is short. | Refer to Diagnosis Procedure. | ||
| 2 | Fuel gauge circuit is open. | |||
| Engine coolant temperature gauge | 0 | Normal | — | |
| 1 | An engine coolant temperature signal cannot be received from ECM. | Select “Self Diagnostic Result” of “ENGINE.” Refer to DTC Index. |
||
|
0 | Normal | — | |
| 1 | When judging that the illumination control switch signal circuit is short-circuited for 5 minutes or more. | Refer to Diagnosis Procedure. | ||
| 2 | When judging that the steering switch (control switch) signal circuit is short-circuited for 5 minutes or more. | Refer to Component Function Check. | ||
| 3 | When judging that the illumination control switch and steering switch (control switch) signal circuit are short-circuited for 5 minutes or more. | Refer to Diagnosis Procedure and Component Function Check. | ||
| — | 0 | Displays “0” constantly. | — | |
| — | 0 | Displays “0” constantly. | — | |
| — | 0 | Displays “0” constantly. | — | |
CONSULT Function (METER/M&A)
APPLICATION ITEMS
CONSULT can perform the following diagnosis modes via CAN communication and the combination meter.
| Diagnosis mode | Description |
|---|---|
| Self Diagnostic Result | Display non-network DTC which combination meter memorizes. |
| Data Monitor | Displays combination meter input/output data in real time. |
| ECU Identification | Displays combination meter part number. |
| Warning History | Lighting history of the warning lamp and indicator lamp can be checked. |
| Network-DTC | Display network DTC which combination meter memorizes when performing "Diagnosis (All System)". |
| CAN Diag Support Monitor* |
*: Displays when performing "Diagnosis (All System)".
SELF DIAG RESULT
Refer to DTC Index.
Freeze frame data (FFD)
When DTC is detected, the following vehicle condition is recorded and it is displayed on the CONSULT screen.
| Item name | Display item | |
|---|---|---|
| ODO/TRIP METER | Records an odometer value when DTC is detected.
|
|
| DTC count | Records the number of times DTC was detected. | |
DATA MONITOR
Display Item List
X: Applicable
| Display item [Unit] | MAIN SIGNALS | Description |
|---|---|---|
SPEED METER [mph or km/h] |
X | Value of Nissan Pathfinder vehicle speed signal received from ECM via CAN communication. |
SPEED OUTPUT [mph or km/h] |
X | Nissan Pathfinder Vehicle speed signal value transmitted to other units via CAN communication. |
ODO OUTPUT [mph or km/h] |
Odometer signal received from ABS actuator and electric unit (control unit) via CAN communication. | |
TACHO METER [rpm] |
X | Value of the engine speed signal received from ECM via CAN communication. |
FUEL METER [L] |
X | Fuel level indicated on combination meter. |
W TEMP METER [°F or °C] |
X | Value of engine coolant temperature signal is received from ECM via CAN communication. |
ABS W/L [On/Off] |
Status of ABS warning lamp detected from ABS warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication. | |
VDC/TCS IND [On/Off] |
Status of VDC OFF indicator lamp detected from VDC OFF indicator lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication. | |
SLIP IND [On/Off] |
Status of VDC warning lamp detected from VDC warning lamp signal received from ABS actuator and electric unit (control unit) via CAN communication. | |
BRAKE W/L [On/Off] |
Status of brake warning lamp detected from brake warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication and brake fluid level switch signal from brake fluid level switch. |
|
E-PKB warning lamp [On/Off] |
Status of electric parking brake warning lamp detected from electric parking brake warning lamp signal from electric parking brake control module via CAN communication. | |
DOOR W/L [On/Off] |
Status of door open warning detected from door switch signal received from BCM via CAN communication. | |
TRUNK/GLAS-H [Off] |
||
HI-BEAM IND [On/Off] |
Status of high beam indicator lamp detected from high beam request signal is received from BCM via CAN communication. | |
TURN IND [On/Off] |
Status of turn signal indicator lamp detected from turn indicator signal is received from BCM via CAN communication. | |
FR FOG IND [On/Off] |
Status of front fog lamp indicator lamp detected from front fog light request signal is received from BCM via CAN communication. | |
RR FOG IND [Off] |
||
LIGHT IND [On/Off] |
Status of position lamp indicator lamp detected from position light request signal is received from BCM via CAN communication. | |
OIL W/L [On/Off] |
Status of engine oil pressure warning detected from engine oil pressure warning lamp signal is received from ECM via CAN communication. | |
MIL [On/Off] |
Status of malfunction indicator lamp detected from malfunctioning indicator signal is received from ECM via CAN communication. | |
GLOW IND [Off] |
||
C-ENG2 W/L [Off] |
||
CRUISE IND [Off] |
||
SET IND [Off] |
||
CRUISE W/L [Off] |
||
BA W/L [On/Off] |
Status of AEB warning lamp judged from AEB warning lamp signal received from ADAS control unit 2 via CAN communication. | |
ATC/T-AMT W/L [Off] |
||
ATF TEMP W/L [Off] |
||
CVT IND [Off] |
||
4WD W/L [Off] |
||
4WD LOCK IND [Off] |
||
FUEL W/L [On/Off] |
Low fuel warning status detected by the identified fuel level. | |
WASHER W/L [On/Off] |
Status of low washer fluid warning judged from washer level switch input to combination meter. | |
AIR PRES W/L [On/Off] |
Status of low tire pressure warning lamp judged from low tire pressure lamp signal received from BCM via CAN communication. | |
KEY G/Y W/L [On/Off] |
Status of Intelligent Key system malfunction detected from meter display signal is received from BCM via CAN communication. | |
KEY R W/L [On/Off] |
Status of Intelligent Key system malfunction detected from meter display signal is received from BCM via CAN communication. | |
KEY KNOB W/L [On/Off] |
Status of Intelligent Key system malfunction detected from meter display signal is received from BCM via CAN communication. | |
EPS W/L [On/Off] |
Status of power steering warning lamp detected from power steering warning lamp signal is received from EPS control unit via CAN communication. | |
e-4WD W/L [Off] |
||
AFS OFF IND [Off] |
||
4WAS/RAS W/L [Off] |
||
DDS W/L [Off] |
||
LANE W/L [Off] |
||
LDP IND [Off] |
||
SLOW IND [Off] |
||
READY IND [Off] |
||
INVT TEMP IND [Off] |
||
SYS FAIL W/L [Off] |
||
SFT POSI W/L [Off] |
||
HV BAT W/L [Off] |
||
HEV BRAKE W/L [Off] |
||
SFT OPER W/L [Off] |
||
LANE KEEP W/L [Off] |
||
IDOL STOP IND [Off] |
||
CHAGE W/L [On/Off] |
Status of charge warning lamp judged from 12V battery charge warning lamp signal received from ECM via CAN communication. | |
4WD AUTO IND [Off] |
||
DPF W/L [Off] |
||
TRAILER IND [Off] |
||
ECO MODE IND [On/Off] |
Status of ECO drive indicator lamp judged from ECO drive indicator lamp signal received from ECM via CAN communication. | |
ATP W/L [Off] |
||
E-SUS IND [Off] |
||
DCA IND [Off] |
||
MT SYNC REV IND [Off] |
||
FILTER W/L [Off] |
||
Urea remaining W/L [Off] |
||
ACC TARGET [On/Off] |
Status of Nissan Pathfinder vehicle ahead detection indicator judged from meter display signal received from ADAS control unit 2 via CAN communication. | |
ACC DISTANCE [Off, SHORT, Mid, LONG] |
Status of set distance indicator judged from meter display signal received from ADAS control unit 2 via CAN communication. | |
ACC SET SPEED [km/h/Off] |
Status of set Nissan Pathfinder vehicle speed indicator judged from meter display signal received from ADAS control unit 2 via CAN communication. | |
ACC UNIT [On/Off] |
Status of display unit judged from meter display signal received from ADAS control unit 2 via CAN communication. | |
SHIFT IND [P, R, N, D, S, L, B, 1–6, M1–M8, A1–A6] |
Status of shift position indicator judged from shift position signal received from TCM with CAN communication line. | |
GEAR SHIFT IND [Off] |
||
4WD IND [AUTO] |
||
OFFLOAD IND [Off] |
||
ECO DRIVE IND G [Off] |
||
ECO DRIVE IND O [Off] |
||
BSW IND [Off] |
||
DRIVE MODE STATS [Off] |
||
SCR/OIL DISP [Off] |
||
TOW MODE IND [Off] |
||
CHECK SUS IND [Off] |
||
FUEL CAP W/L [On/Off] |
Status of fuel filler cap warning display detected from fuel filler cap warning display signal received from ECM via CAN communication. | |
E-PKB indicator [On/Off] |
Status of electric parking brake indicator lamp detected from electric parking brake indicator lamp signal from electric parking brake control module via CAN communication. | |
PNP P SW [Off] |
||
PNP N SW [Off] |
||
O/D OFF SW [On/Off] |
Status of SPORT mode switch. | |
RANGE 1 [Off] |
||
AT S MODE SW [Off] |
||
AT P MODE SW [Off] |
||
M RANGE SW [On/Off] |
Status of manual mode switch. | |
NM RANGE SW [On/Off] |
Status of non-manual mode switch. | |
AT SFT UP SW [On/Off] |
Status of manual mode shift up switch. | |
AT SFT DWN SW [On/Off] |
Status of manual mode shift down switch. | |
ST SFT UP SW [Off] |
||
ST SFT DWN SW [Off] |
||
AIR COND SIG [Off] |
||
HEATER FAN SW [Off] |
||
REAR DEF SW [Off] |
||
A/C LOW TEMP [Off] |
||
COMP F/B SIG [Off] |
||
4WD LOCK SW [Off] |
||
SYNC MODE [Off] |
||
PKB SW [On/Off] |
Status of parking brake switch. | |
BUCKLE SW [On/Off] |
Status of front seat belt buckle switch (driver side). | |
BRAKE OIL SW [On/Off] |
Status of brake fluid level switch. | |
AIR BAG SIG [On/Off] |
Status of SRS air bag warning lamp signal received from air bag diagnosis sensor unit via CAN communication. | |
CHG SIG [On/Off] |
Status 12V battery charge warning lamp signal received from ECM via CAN communication. | |
RR COMB STATE [Off] |
||
ABS EXIST [Off] |
||
VDC/TCS EXIST [Off] |
||
AMB POWER [Off] |
||
MODE A SW [Off] |
||
MODE B SW [Off] |
||
MT SYNC REV SW [Off] |
||
PASS BUCKLE SW [On/Off] |
Status of passenger seat belt buckle switch. | |
TOW MODE SW [Off] |
||
ECO MODE SW [On/Off] |
Status of ECO mode switch. | |
SPORT MODE SW [On/Off] |
Status of SPORT mode switch. | |
Electric shift W/L (red) [On/Off] |
Status of electric shift warning lamp (red) detected from electric shift warning lamp signal received from electric shift control module via CAN communication. | |
LED LMP R OPEN [On/Off] |
Status of front combination lamp RH judged based on headlamp warning signal input from IPDM E/R via CAN communication. | |
LED LMP L OPEN [On/Off] |
Status of front combination lamp LH judged based on headlamp warning signal input from IPDM E/R via CAN communication. | |
DISTANCE [km] |
Value of distance to empty calculated by combination meter. | |
OUTSIDE TEMP [°F or °C] |
Ambient temperature value converted from ambient sensor signal received from ambient sensor. |
|
FUEL LOW SIG [On/Off] |
Low fuel warning status detected by the identified fuel level. | |
CRANKING SIG [On/Off] |
Cranking status is displayed. | |
ST CNT SIG [On/Off] |
Starter control status judged from starter control status signal is received from BCM via CAN communication. | |
DOOR LOCK SIG [On/Off] |
Status of door lock switch. | |
DR DOOR SIG [LHD/RHD] |
Status of driver side door. | |
BUZZER [On/Off] |
X | Buzzer status (in the combination meter) is detected from the buzzer output signal received from each unit via CAN communication and the warning output condition of the combination meter. |
BATTERY CIRCUIT STATUS [NORMAL/OPEN] |
Status of fuse for shipping mode from shipping mode status signal received from BCM via CAN communication. | |
PARKING ASSIST DSP [On/Off] |
Status of sonar display received from sonar control unit via CAN communication. | |
PARKING ASSIST SENSOR [Off/Rear/FRONT/On/Not support] |
Activation status of sonar system received from sonar control unit via CAN communication. | |
PARKING ASSIST VOLUME [High/Medium/Low/Not support] |
Status of sonar volume received from sonar control unit via CAN communication. | |
PARKING ASSIST RANGE [Far/Medium/Near/Not support] |
Status of sonar range received from sonar control unit via CAN communication. | |
RAB W/L [On/Off] |
Status of RAB warning lamp judged from RAB warning lamp signal received from ADAS control unit 2 via CAN communication. | |
Electric shift W/L [On/Off] |
Status of electric shift warning lamp detected from electric shift warning lamp signal received from electric shift control module via CAN communication. | |
Sailing stop W/L [Off] |
||
ALL PWER MTER [kw] |
||
SOC METER [%] |
||
VOLTMETER [V] |
||
BRAKE PAD W/L [V] |
||
TPMS DISP [On/Off] |
Status of TPMS display received from BCM via CAN communication. | |
TIRE STATUS FR [Off] |
||
TIRE STATUS FL [Off] |
||
TIRE STATUS RR [Off] |
||
TIRE STATUS RL [Off] |
||
SONAR SET AVA [Available/Unavailable] |
Status of sonar setting of combination meter. | |
STRG SW INPUT [SW1-SW12, NOT INPUT] |
Status of steering switch. | |
STRG SW OUTPUT [SW1-SW12, NOT OUTPUT] |
Status of steering switch output signal. | |
Sonar set output [NO SW ST, FEB Off, FEB On, LDW OFF, LDW ON, BSW OFF, BSW ON, P MV OFF, P MV ON, SONAR OFF, SONAR ON, P SEN OFF, P SEN ON, P SEN FRONT, P BUZ HIGH, P BUZ MED, P BUZ LOW, P RNG FAR, P RNG MED, P RNG NEAR] |
Status of Driving Aids and Parking Aids set on the information display of the combination meter. | |
HI-BEAM ASST IND [Off] |
||
AVM display [Off] |
||
SONAR DET STATUS [On/Off] |
Activation status of sonar system received from sonar control unit via CAN communication. | |
SONAR WARN [Off/DEACT/ERROR] |
Status of parking sensor error detected from parking sensor error signal is received from sonar control unit via CAN communication. | |
SONAR DET DSP RC [LEVEL1/LEVEL2/LEVEL3/LEVEL4] |
Status of center sensor rear detection obstacle from sonar control unit via CAN communication. | |
SONAR DET DSP AREA RC [On/Off] |
Activation status of center sensor rear judged from a sonar indicator signal received from the sonar control unit via CAN communication. | |
DIPPED BEAM IND [Off] |
||
SONAR DET DSP RL [LEVEL1/LEVEL2/LEVEL3/LEVEL4] |
Status of corner sensor rear LH detection obstacle from sonar control unit via CAN communication. | |
SONAR DET DSP AREA RL [On/Off] |
Activation status of corner sensor rear LH judged from a sonar indicator signal received from the sonar control unit via CAN communication. | |
SONAR DET DSP RR [LEVEL1/LEVEL2/LEVEL3/LEVEL4] |
Status of corner sensor rear RH detection obstacle from sonar control unit via CAN communication. | |
SONAR DET DSP AREA RR [On/Off] |
Activation status of corner sensor rear RH judged from a sonar indicator signal received from the sonar control unit via CAN communication. | |
SONAR DET DSP FC [LEVEL1/LEVEL2/LEVEL3/LEVEL4] |
Status of center sensor front detection obstacle from sonar control unit via CAN communication. | |
SONAR DET DSP AREA FC [On/Off] |
Activation status of center sensor front judged from a sonar indicator signal received from the sonar control unit via CAN communication. | |
SONAR DET DSP FL [LEVEL1/LEVEL2/LEVEL3/LEVEL4] |
Status of corner sensor front LH detection obstacle from sonar control unit via CAN communication. | |
SONAR DET DSP AREA FL [On/Off] |
Activation status of corner sensor front LH judged from a sonar indicator signal received from the sonar control unit via CAN communication. | |
SONAR DET DSP FR [LEVEL1/LEVEL2/LEVEL3/LEVEL4] |
Status of corner sensor front RH detection obstacle from sonar control unit via CAN communication. | |
SONAR DET DSP AREA FR [On/Off] |
Activation status of corner sensor front RH judged from a sonar indicator signal received from the sonar control unit via CAN communication. | |
SONAR DIST DSP [Off/stop/30cm/40cm/50cm/60cm] |
Sonar of information display of sonar sensor detection distance from sonar control unit via CAN communication. | |
Engine Off timer [0] |
||
TRQ DSTRBT [%] |
||
LANE IND [WARN ON/BLINK/On/Off] |
Status of LANE display detected from meter display signal is received from ADAS control unit 2 via CAN communication. | |
FCW IND [WARN ON/BLINK/On/Off] |
Status of FCW system display detected from meter display signal is received from ADAS control unit 2 via CAN communication. | |
LDW IND [WARN ON/BLINK/On/Off] |
Status of LDW system display detected from meter display signal is received from ADAS control unit 2 via CAN communication. | |
TPMS FLT TIRE [On/Off] |
Status of flat tire detected from tire pressure data signal is received from BCM via CAN communication. | |
TPMS PRESS L [On/Off] |
Status of tire pressure low from tire pressure data signal is received from BCM via CAN communication. | |
4WD CL TMP H [Off] |
||
4WD TIRE CHCK [Off] |
||
4WD SYS MALF [Off] |
||
E SUS MALF [Off] |
||
ABS MALF [On/Off] |
Status of ABS malfunction display. | |
VDC MALF [On/Off] |
Status of VDC malfunction display. | |
ENG SYS CHCK [On/Off] |
Status of engine warning display. | |
ASCD SYS MALF [On/Off] |
Status of ASCD malfunction display. | |
OVER-BOOST IND [Off] |
||
ASCD SPD BLNK [On/Off] |
Blinking status of ASCD set Nissan Pathfinder vehicle speed judged by the ASCD status signal received from ECM via CAN communication. | |
ASCD STATUS [Off, SL On, SL sus, SL inhi, CC On, CC sus, CC inhi, N/A] |
Status of ASCD status display judged by the ASCD status signal received from ECM via CAN communication. | |
ASCD REQ SPD [km/h] |
ASCD set Nissan Pathfinder vehicle speed value judged by the ASCD status signal received from ECM via CAN communication. | |
Urea remain [Off] |
||
E/O CHG TMNG [0] |
||
E/O CHG TMNG RST [On/Off] |
Resetting of a remaining distance to the engine oil change time. | |
Urea time [0] |
||
AT STOP START IND [Off] |
||
AT STOP START STS [Off] |
||
AT STOP START SW [Off] |
||
HILL HOLD WARNING [Off] |
||
ASSIST/CHARGE GAUGE [%] |
||
EV IND [Off] |
||
ACCEL GAUGE [%] |
||
REMAINING ENERGY GAUGE [%] |
||
ECO ACCEL POSITION [%] |
Status of ECO pedal guide display. | |
REGENERATIVE BRAKE TRQ [%] |
||
MECHANICAL BRAKE TRQ [%] |
||
ENERGY FLOW [MODE8] |
||
ECO DRIVE NAVI [LEVEL 0 - 30] |
Status of ECO pedal guide detected from ECO pedal guide signal received from ECM via CAN communication. | |
Target front Nissan Pathfinder vehicle [On/Off/BLINK/IBA BLINK] |
Status of target front Nissan Pathfinder vehicle display. | |
BCI [Off] |
||
BCI LEFT [Off] |
||
BCI RIGHT [Off] |
||
CRUISE READY IND [Off] |
||
Set Forward Emergency Brake [On/Off/Not support] |
Status of AEB system setting. | |
SET LDW [On/Off/Not support] |
Status of LDW system setting. | |
SET BSW [On/Off/Not support] |
Status of BSW system setting. | |
Set Lane timing [Off] |
||
SET BCI BRAKE RESUME [Off] |
||
SET DCA [Not support] |
||
SET LDP [On/Off/Not support] |
Status of I‐LI system setting. | |
SET DCA TIMING [Not support] |
||
SET RMOD [Off] |
||
SET BCI IGNITION STATUS [Off] |
||
SET IBA [Not support] |
||
MSS RADER DEACTIVATED [Off] |
||
CHASSIS CONTROL WARN [On/Off] |
Status of chassis control display (warning) from chassis control malfunction signal is received from chassis control module via CAN communication. | |
Set Direct Adaptive Steering [Off] |
||
Set Emergency Assist Pedal [On/Off/Not support] |
Status of EAPM setting. | |
Set No Entry [Not support] |
||
Set Traffic Sign Recognition [On/Off/Not support] |
Status of TSR setting. | |
SIGNAL WARNING STATUS [On/Off] |
Status of signal warning. | |
HEV system state [Off] |
||
LOW LI-ION BAT CHG WARN [Off] |
||
VSP OFF IND [Off] |
||
TIRE PRESS FR [kPa, kg/cm2 or Psi] |
The data of front RH tire pressure from BCM via CAN communication. | |
TIRE PRESS FL [kPa, kg/cm2 or Psi] |
The data of front LH tire pressure from BCM via CAN communication. | |
TIRE PRESS RR [kPa, kg/cm2 or Psi] |
The data of rear RH tire pressure from BCM via CAN communication. | |
TIRE PRESS RL [kPa, kg/cm2 or Psi] |
The data of rear LH tire pressure from BCM via CAN communication. | |
BSW IND [WARN ON/BLINK/On/Off] |
Status of BSW system display detected from meter display signal is received from ADAS control unit 2 via CAN communication. | |
IBA IND [Off] |
||
DCA IND [Off] |
||
LDP IND [On/Off] |
Status of I-LI system display detected from meter display signal is received from ADAS control unit 2 via CAN communication. | |
BSI IND [On/Off] |
Status of I-BSI system display detected from meter display signal is received from ADAS control unit 2 via CAN communication. | |
STATUS CHECK DSP [Off] |
||
SET SPEED FLASHING [Off] |
||
MSS STATUS WARNING ERR [Off] |
||
MSS NO WARN SET [Off] |
||
MSS NO DYNAMIC SET [Off] |
||
PA display request [Off] |
||
Ack for PA [Not PA] |
||
Camera display request [Off] |
||
PA malfunction [Off] |
||
Steering SW output [Off] |
||
Status of call display [On/Off] |
Status of ProPILOT Assist system display jump function setting detected from ProPILOT Assist system status signal is received from ADAS control unit 2 via CAN communication. | |
Lane detect [On/Off] |
Status of lane detection. | |
PP inst message [Speed/Active 2/Active1/Standby/Off/No msg] |
Status of ProPILOT Assist system instruction message. | |
PP display status [Stby/Stby P/Active/Active P/Free/Free H/Malf/Off] |
Status of ProPILOT Assist system display detected from ProPILOT Assist system status signal is received from ADAS control unit 2 via CAN communication. | |
Hand free status [On/Off] |
Status of hands free warning display. | |
PP cancel info [No act/Speed/Target/PA/Obstacle/Weather/E-PKB/Seatbelt] |
Status of ProPILOT Assist system cancel information. | |
FEB status [On/Off] |
Status of AEB system function. | |
PP setting status [Temp 1/Avail 1/Avail 2/Temp 2] |
Status of ProPILOT Assist system function detected from ProPILOT Assist system status signal is received from ADAS control unit 2 via CAN communication. | |
| Nissan Pathfinder Vehicle distance | ||
EAPM status [On/Off/No spprt] |
Status of EAPM setting. | |
Traffic sign [Signal/No entry/Stop/No msg] |
Status of TSR display. |
ECU IDENTIFICATION
The combination meter part number is displayed.
Stores histories when warning/indicator lamp is turned on.
“WARNING HISTORY” indicates the “TIME” when the warning/indicator lamp is turned on.
The “TIME” above is:
0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine and waiting for 30 seconds.
1 - 39: The number of times the engine was restarted after the 0 condition.
NO WARNING HISTORY: Stores NO (0) turning on history of warning/indicator lamp.
Display Item
| Display item | Description |
|---|---|
| ABS W/L | Lighting history of ABS warning lamp. |
| VDC/TCS IND | Lighting history of VDC OFF indicator lamp. |
| SLIP IND | Lighting history of VDC warning lamp. |
| BRAKE W/L | Lighting history of brake warning lamp. |
| OIL W/L | Lighting history of engine oil pressure warning lamp. |
| C-ENG W/L | Lighting history of malfunction indicator lamp (MIL). |
| BA W/L | Lighting history of AEB warning lamp. |
| AIR PRES W/L | Lighting history of low tire pressure warning lamp. |
| EPS W/L | Lighting history of electric power steering warning lamp. |
| CHAGE W/L | Lighting history of 12V battery charge warning lamp. |