Door & Lock - Hood Lock
Exploded View

| 1. | Hood lock | 2. | Hood lock release cable assembly | 3. | Hood lock release handle |
| : Clip |
- Hood Lock
- Hood Lock Release Handle
- Hood Lock Release Cable Assembly
Hood Lock Nissan Pathfinder 5th Gen
Removal and Installation
REMOVAL
Remove front grill cover. Refer to Removal and Installation.
Disconnect hood lock release cable and secondary latch cable from hood lock.
Remove bolts, disconnect the harness connector and remove hood lock.
INSTALLATION
Installation is in the reverse order of removal.
Inspection
Check that secondary latch is properly engaged with secondary striker with hood’s own weight.
While operating hood lock release handle, carefully check that front end of hood assembly is raised by approximately 20.0 mm (0.79 in). Also check that hood lock release handle returns to original position.
Check that hood lock release handle operates at 49 N (5.0 kg-m, 11.0 ft-lb) or below.
Install so that static closing force of hood is 240-490 N (24.5-50.0 kg–m, 54-110.2 ft–lb).
Check hood lock lubrication condition. If necessary, apply a suitable multi-purpose grease to hood lock assembly.
Hood Lock Release Handle Nissan Pathfinder 2026
Removal and Installation
REMOVAL
Using a suitable tool, release hood lock release handle (1) in direction shown.

INSTALLATION
Installation is in the reverse order of removal.
Hood Lock Release Cable Assembly Nissan Pathfinder R53
Removal and Installation
REMOVAL
Remove hood lock. Refer to Removal and Installation.
Remove front fender protector (LH). Refer to Removal and Installation.
Using a suitable tool, release hood lock cable assembly clips.
Remove dash side finisher (LH). Refer to Exploded View.
Remove hood lock release cable assembly mounting bolt.
Remove grommet on lower dash, and pull the hood lock release cable assembly toward the passenger compartment.
INSTALLATION
Note the following items, and then install in the reverse order of removal.