Door & Lock - Rear Door
Exploded View

| 1. | Rear door | 2. | Grommet | 3. | Rear door striker |
| 4. | Rear door weather-strip | 5. | Rubber bumper | 6. | Rear door check link |
| 7. | Rear door hinge (lower) | 8. | Rear door hinge (upper) | : Clip |
- Rear Door
- Rear Door Striker
- Rear Door Hinge
- Rear Door Check Link
Rear Door Nissan Pathfinder R53
Removal and Installation
REMOVAL
Remove rear door harness grommet (1).

Release and pull harness out from the [(body side) (2)].
Disconnect the harness connectors from rear door.
Remove rear door check link bolt (A) from [(body side) (1)].

Remove rear door hinge nuts (door side) and rear door.
INSTALLATION
Installation is in the reverse order of removal.
Adjustment

| 1. | Front fender | 2. | Front door | 3. | Rear door |
| 4. | Body side | 5. | Door striker | 6. | Front door hinge |
| 7. | Rear door upper hinge | 8. | Rear door lower hinge |
Unit: mm (in)
| Portion | Standard | |||
|---|---|---|---|---|
| Front door panel – Front fender assembly | A – A | H | Clearance | 3.0 – 5.0 [0.118 – 0.197] |
| J | Surface height | (-1.0) – (+1.0) [(-0.039) – (+0.039)] |
||
| Front door panel – Rear door panel | B – B | K | Clearance | 3.5 – 5.5 [0.138 – 0.217] |
| L | Surface Height | (-1.0) – (+1.0) [(-0.039) – (+0.039)] |
||
| Rear door panel – Body side outer | C – C | M | Clearance | 3.3 – 5.3 [0.130 – 0.209] |
| N | Surface height | (-1.0) – (+1.0) [(-0.039) – (+0.039)] |
||
Check the clearance and surface height between rear door and each part by visually and touching.
If the clearance and the surface height are out of specification, adjust them according to the procedures shown below.
Fitting Adjustment Procedure
Remove center pillar lower finisher. Refer to Removal and Installation.
Loosen rear door hinge nuts (door side).
Adjust surface height of rear door according to specifications provided.
Temporarily tighten rear door hinge nuts (door side).
Loosen rear door hinge nuts and bolts (body side).
Raise rear door at rear end to adjust clearance of rear door according to specifications provided.
After adjustment, tighten bolts and nuts to specified torque.
Install center pillar lower finisher. Refer to Removal and Installation.
Rear Door Striker Nissan Pathfinder 2026
Removal and Installation
REMOVAL
Remove bolts and rear door striker.
INSTALLATION
Installation is in the reverse order of removal.
Adjustment
DOOR STRIKER ADJUSTMENT
Loosen door striker bolts.
Adjust door striker so that it becomes parallel with front door lock insertion direction.

Rear Door Hinge Nissan Pathfinder SUV
Removal and Installation
REMOVAL
Remove rear door assembly. Refer to Removal and Installation.
Remove center pillar lower finisher (rear door lower hinge only). Refer to Removal and Installation.
Remove rear door hinge bolts and nuts and rear door hinge.
INSTALLATION
Installation is in the reverse order of removal.
Rear Door Check Link Nissan Pathfinder R53
Removal and Installation
REMOVAL
Fully close rear door window.
Remove rear door speaker. Refer to Removal and Installation.
Remove rear door check link bolt (body side).
Remove rear door check link bolts (door side).
Remove rear door check link through hole in rear door panel.
INSTALLATION
Installation is in the reverse order of removal.