Basic Inspection
- Additional Service When Replacing Bcm
- Configuration (bcm)
- Shipping Mode Cancel Operation
- Mac Key Writing
Additional Service When Replacing Bcm Nissan Ariya 2026
Description
Perform the following operations when replacing BCM. For details, refer to Work Procedure.
AFTER REPLACEMENT
Writing Nissan Ariya vehicle specification
Pairing of BCM and Intelligent Key unit
Register of Nissan Ariya vehicle identification number
Writing MAC key
Tire pressure sensor ID registration (if equipped)
Work Procedure
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
>>GO TO 2.
WRITING Nissan Ariya Vehicle SPECIFICATION
Perform configuration (BCM). Refer to Description.
>>GO TO 3.
PAIRING OF BCM AND INTELLIGENT KEY UNIT
Perform the pairing of BCM and Intelligent Key unit. Press UNLOCK button of Intelligent Key.
>>GO TO 4.
REGISTER OF Nissan Ariya Vehicle IDENTIFICATION NUMBER
With CONSULT
Select “VIN REGISTRATION” of BCM (BCM) work support item.
Refer to CONSULT and follow the on-screen instructions.
GO TO 5
WRITING MAC KEY
Perform MAC key writing. Refer to Description.
>>GO TO 6.
TIRE PRESSURE SENSOR ID REGISTRATION (IF EQUIPPED)
Perform the initialization and registration of tire pressure sensor ID. Refer to Description.
>>WORK END
Configuration (bcm) Nissan Ariya 2026
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the BCM.
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the Nissan Ariya vehicle specification to the BCM.
Refer to Work Procedure.
The configuration no need to “save” configuration data from the BCM. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Power switch ON.
Perform writing Nissan Ariya vehicle specification to BCM following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
WORK END
Shipping Mode Cancel Operation Nissan Ariya SUV
Work Procedure
SHIPPING MODE CANCEL OPERATION
Power switch OFF.
Push in (switch on) the extended storage fuse switch. Refer to How To Check.
Power switch ON.
Power switch OFF and wait at least 2 seconds.
GO TO 2.
SHIPPING MODE CANCEL CHECK
Power switch ON.
Check that extended storage fuse warning message is not displayed on information display.
WORK END
Mac Key Writing Nissan Ariya SUV
Description
When replacing BCM, it is necessary to write MAC key to BCM. Write MAC key to BCM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.
Power switch ON
CONSULT is connected to internet
Work Procedure
PERFORM MAC KEY WRITING
Power switch ON.
Select "MAC key writing" on "Work support" of "BCM" using CONSULT.
Touch "Write".
WORK END