Removal and Installation
- Electric Shift Selector
- Electric Shift Control Module
Electric Shift Selector Nissan Ariya SUV
ELECTRIC SHIFT SELECTOR : Exploded View

| Electric shift selector | |||||
ELECTRIC SHIFT SELECTOR : Removal & Installation

| : Nissan Ariya Vehicle front |
As part
in the figure contains a strong magnet, persons with an electro-medical apparatus should keep it away from his/her body. Otherwise it may cause the electro-medical apparatus to malfunction.Keep it away from magnetic objects such as magnetic cards and metal products (e.g. watches).
Never subject the electric shift selector to impact by dropping or hitting, water splash or high humidity.
Removal
Power switch OFF and disconnect the 12V battery cable from the negative terminal. Refer to PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions.
Remove center console finisher and knee pad assembly. Refer to Disassembly & Assembly.
Remove the mounting bolts of electric shift selector
.

Disconnect the electric shift sensor harness connector
.

Remove the electric shift selector.
Installation
Note the following, and install in the reverse order of removal.
When installing electric shift selector, locator holes
and locator pins
must be aligned.
Perform inspection after installation. Refer to ELECTRIC SHIFT SELECTOR : Inspection.
ELECTRIC SHIFT SELECTOR : Inspection
Inspection after Installation
Shift the selector lever and check that the indication of the selector indicator (on selector lever knob) and the shift position indicator (in the combination meter) correspond to the actual shift position.
Check that the shift operation can be performed properly. Refer to Component Description.
Electric Shift Control Module Nissan Ariya SUV
ELECTRIC SHIFT CONTROL MODULE : Exploded View

| Electric shift control module | Center console assembly | ||||
ELECTRIC SHIFT CONTROL MODULE : Removal & Installation
REMOVAL
Power switch OFF and disconnect the 12V battery cable from the negative terminal. Refer to PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions.
Remove center console assembly. Refer to Removal & Installation.
Disconnect electric shift control module harness connector.
Remove electric shift control module mounting screws and remove electric shift control module
.

INSTALLATION
Note the following, and install in the reverse order of removal.
Perform inspection after installation. Refer to ELECTRIC SHIFT CONTROL MODULE : Inspection.
When replacing electric shift control module, perform adjustment after installation. Refer to ELECTRIC SHIFT CONTROL MODULE : Adjustment.
ELECTRIC SHIFT CONTROL MODULE : Inspection
Inspection after Installation
Shift the selector lever and check that the indication of the selector indicator (on selector lever knob) and the shift position indicator (in the combination meter) correspond to the actual shift position.
Check that the shift operation can be performed properly. Refer to Component Description.
ELECTRIC SHIFT CONTROL MODULE : Adjustment
ADJUSTMENT AFTER INSTALLATION
When replaced electric shift control module, perform P position learning of parking actuator. Refer to Work Procedure.