Removal and Installation
- Road Wheel Tire
- Tire Pressure Sensor
Road Wheel Tire Nissan Ariya 2026
ROAD WHEEL TIRE : Exploded View
19 INCH ROAD WHEEL

| Center cap | Wheel cover | Tire assembly | |||
| : N·m (kg-m, ft-lb) | |||||
20 INCH ROAD WHEEL

| Center cap | Wheel cover | Tire assembly | |||
| : N·m (kg-m, ft-lb) | |||||
ROAD WHEEL TIRE : Removal & Installation
19 INCH ROAD WHEEL
REMOVAL
Remove wheel nuts.
Remove road wheel tire assembly.
If necessary remove center cap.
Remove tire assembly.
Remove the metal clip
fitting from the back side of the wheel using an appropriate tool and remove the wheel cover while removing the nail
.

INSTALLATION
Note the following, install in the reverse order of removal.
Attach the wheel cover with a hole for the air valve to the air valve part.
When replacing or rotating wheels, perform following;
Perform the ID registration. Refer to Work Procedure.
20 INCH ROAD WHEEL
REMOVAL
As shown in the figure, insert the tool (A) between the center cap and the aluminum wheel, and remove the center cap.

Remove wheel nuts.
Remove tire assembly.
Remove tire assembly.
Remove the metal clip
fitting from the back side of the wheel using an appropriate tool and remove the wheel cover while removing the nail
.

INSTALLATION
Note the following, install in the reverse order of removal.
Center cap installation procedure.
Align the notch
on the wheel with the anti-rotation pin
on the cap.
Push with the palm of your hand perpendicularly to the cap.
When installing the center cap
and wheel cover
, install in the align as shown in
of the figure.
When replacing or rotating wheels, perform following;
Perform the ID registration. Refer to Work Procedure.
ROAD WHEEL TIRE : Inspection
ALUMINUM WHEEL
Check tires for wear and improper inflation.
Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout.
Remove tire from wheel and mount wheel on a tire balancer machine.

| Lateral Deflection |
Refer to Service Data |
| Vertical Deflection |
Refer to Service Data |
ROAD WHEEL TIRE : Removal of Tire After Using a Puncture Repair Agent
Remove tires from the vehicle.
Remove tire from road wheel, using a tire changer.
Clean inside of the tire.
Fix a tire blowout, if repairable.
Replace tire with a new one, if not repairable.
Tire Pressure Sensor Nissan Ariya first Gen
TIRE PRESSURE SENSOR : Exploded View

| Screw | Tire pressure sensor | Valve | |||
| Valve core | Valve cap | ||||
| : Comply with the assembly procedure when tightening. Refer to Removal & Installation. | |||||
| : N·m (kg-m, in-lb) | |||||
| : Always replace after every disassembly. | |||||
TIRE PRESSURE SENSOR : Removal & Installation
REMOVAL
Remove road wheel tire assembly. Refer to Removal and Installation.
Remove valve cap, valve core and then deflate tire.
Use the tire changer and disengage the tire beads.
Apply bead cream or an equivalent to the tire beads.
Turn tire so that valve hole is at bottom and bounce so that tire pressure sensor
is near valve hole. Carefully lift tire onto turntable and position valve hole (and tire pressure sensor) 270 degree from mounting/dismounting head
.

Remove mounting screw
, and then remove tire pressure sensor
from valve
.

Cut the part
of valve, using a pliers cutters (B).

Remove the valve
from road wheel
, using a valve inserter (A).

INSTALLATION
When reusing the tire pressure sensor, install the valve to the tire pressure sensor, follow the procedure below.Insert the tire pressure sensor
to the roll pin
of valve
.


Spray water or immerse the valve into water, before mounting in the area
indicated shown in the figure.

Install the tire pressure sensor assembly, follow the procedure below.Set the tire pressure sensor assembly to road wheel.


Apply bead cream or an equivalent to the tire beads.
Install the tire inside beads
onto the road wheel
in the position shown in the figure.

Set the tire onto the turntable so that the tire changer arm
is at a position approximately 270° from the tire pressure sensor
.

Install the tire outer side beads onto the road wheel.
Check the tire pressure for all wheels and adjust to the specified value. Refer to Service Data.
Install tire to the Nissan Ariya vehicle. Refer to Removal and Installation.
Perform tire pressure sensor ID registration. Refer to Work Procedure.
TIRE PRESSURE SENSOR : Disposal
Remove battery from tire pressure sensor.

Remove urethane from tire pressure sensor.
Cut battery terminal
, then remove battery
from tire pressure sensor.