Symptom Diagnosis
- Eps Warning Lamp Does Not Turn on
- Eps Warning Lamp Does Not Turn Off
- Steering Wheel Turning Force Is Heavy or Light
- Unbalance Steering Wheel Turning Force and Return Between Right and Left
Eps Warning Lamp Does Not Turn on Nissan Ariya first Gen
Diagnosis Procedure
EPS warning lamp does not turn ON when the power switch is placed ON from OFF. (Check the illumination of the EPS warning lamp.)
CHECK EPS WARNING LAMP
Perform the trouble diagnosis of EPS warning lamp. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check that there is no malfunction in each harness connector pin terminal or disconnection.
NO>>Repair or replace the specific malfunctioning part.
Eps Warning Lamp Does Not Turn Off Nissan Ariya first Gen
Diagnosis Procedure
EPS warning lamp does not turn OFF several seconds after the vehicle is READY state.
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Power switch OFF to ON.
Select “Self Diagnostic Result” mode of “EPS/DAST 3”.
Is any DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK EPS WARNING LAMP
Perform the trouble diagnosis of EPS warning lamp. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the specific malfunctioning part.
CHECK EPS CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT
Perform the trouble diagnosis of EPS control unit power supply and ground. Refer to DTC Diagnosis Procedure.
Is the inspection result normal?
YES>>Check that there is no malfunction in each harness connector pin terminal or disconnection.
NO>>Repair or replace the specific malfunctioning part.
Steering Wheel Turning Force Is Heavy or Light Nissan Ariya 1st generation
Diagnosis Procedure
Steering wheel turning force is heavy or light.
PERFORM SELF-DIAGNOSIS
With CONSULT
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
Power switch ON.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is a malfunctioning system displayed?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK THE ILLUMINATION OF THE POWER STEERING WARNING LAMP
Check that the power steering warning lamp turns ON when power switch ON. Then, power steering warning lamp turns OFF after set the Nissan Ariya vehicle to READY.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Perform trouble diagnosis of power steering warning lamp. Refer to Component Function Check.
CHECK THE POWER STEERING CONTROL MODULE SIGNAL (1)
With CONSULT
Set the Nissan Ariya vehicle to READY.
Turn steering wheel from full left stop to full right stop.
Select “EPS/DIRECT ADAPTIVE STEERING 3”, “Data monitor” and “Assist level” in this order. Refer to Values On The Diagnosis Tool.
Dose the item in “Data monitor” indicate “99%”?
YES>>GO TO 6.
NO>>GO TO 4.
CHECK THE POWER STEERING CONTROL MODULE SIGNAL (2)
With CONSULT
Select “EPS/DIRECT ADAPTIVE STEERING 3”, “Data monitor” and “Battery voltage” in this order. Refer to Values On The Diagnosis Tool.
Is the display value “10.5 V” or more?
YES>>GO TO 5.
NO>>Perform trouble diagnosis of power steering control module power supply and ground. Refer to Diagnosis Procedure.
CHECK THE POWER STEERING CONTROL MODULE SIGNAL (3)
With CONSULT
Select “EPS/DIRECT ADAPTIVE STEERING 3”, “Data monitor” and “Assist level” in this order. Refer to Values On The Diagnosis Tool.
Stop the EPS system until the item becomes “99%”.
Check that the symptom continues.
Dose the symptom continue?
YES>>GO TO 6.
NO>>The assist torque decreases because of protection function. This is not malfunction. INSPECTION END
CHECK THE POWER STEERING CONTROL MODULE SIGNAL (4)
With CONSULT
Set the Nissan Ariya vehicle to READY.
Turn steering wheel from full left stop to full right stop.
Select “EPS/DIRECT ADAPTIVE STEERING 3”, “Data monitor” and “Steering torque” in this order. Refer to Values On The Diagnosis Tool.
Is data specified value?
YES>>GO TO 7.
NO>>Replace the power steering control module . Refer to Removal and Installation.
CHECK THE STEERING FORCE
Check the steering wheel turning force. Refer to STEERING COLUMN: Inspection.
Is the check result normal?
YES>>INSPECTION END
NO>>It is possible that there is a mechanical malfunction. Check the steering system. Refer to STEERING GEAR AND LINKAGE : Inspection.
Unbalance Steering Wheel Turning Force and Return Between Right and Left Nissan Ariya 2026
Diagnosis Procedure
Unbalance steering wheel turning force and return between right and left.
PERFORM SELF-DIAGNOSIS
With CONSULT
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
Power switch ON.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is a malfunctioning system displayed?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK THE ILLUMINATION OF THE POWER STEERING WARNING LAMP
Check the power steering warning lamp while set the Nissan Ariya vehicle to READY.
Does the power steering warning lamp turn OFF?
YES>>GO TO 3.
NO>>Refer to Component Function Check.
CHECK WHEEL ALIGNMENT
Check the wheel alignment. Refer to WHEEL ALIGNMENT : Inspection.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Adjustment of wheel alignment. Refer to WHEEL ALIGNMENT : Adjustment.
CHECK POWER STEERING CONTROL MODULE SIGNAL
With CONSULT
Set the Nissan Ariya vehicle to READY.
Turn steering wheel from full left stop to full right stop.
Select “EPS/DIRECT ADAPTIVE STEERING 3”, “Data monitor” and “Steering torque” in this order. Refer to Values On The Diagnosis Tool.
Is data specified value?
YES>>GO TO 5.
NO>>Replace the power steering control module. Refer to Removal and Installation.
CHECK STEERING WHEEL TURNING FORCE
Check the steering wheel turning force. Refer to STEERING COLUMN: Inspection.
Is the check result normal?
YES>>INSPECTION END
NO>>It is possible that there is a mechanical malfunction. Check the steering system. Refer to STEERING GEAR AND LINKAGE : Inspection.