System Description

In this manual: System Description
How to Use This Manual — 1Precautions — 1Preparation — 1Vehicle Information — 1Basic Inspection — 1Preparation. Commercial Service Tools Or/and Repair Part — 1Description — 1Component Parts — 1System — 1Diagnosis System (vcm) — 1Ecu Diagnosis Information. Vcm — 1Ev Control System — 1Ev/hev (vcm) — 1Component Parts /circuit Diagnosis — 1Ev Control System — 1Periodic Maintenance. Ev System Warning Lamp — 1Removal and Installation. Vcm — 1Traction Motor System :: Front Traction Motor — 1Preparation — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Traction Motor System :: Rear Traction Motor — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Ev Battery System :: 66kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 2Service Data — 1Ev Battery System :: 91kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 1Service Data — 2Preparation. Vehicle Charging System — 1Vehicle Charging System :: Description — 1Component Parts — 2System — 1Diagnosis System (on-Board Charger) — 1Diagnosis System (dc/dc Converter) — 1Ecu Diagnosis Information — 1Vehicle Charging System — 1Charger/pd Module (on-Board Charger) — 1Cplc (cplc) — 1Dcdc (dc/dc Converter) — 1Component Parts/circuit Diagnosis — 1Symptom Diagnosis — 1Evse Inspection — 1Periodic Maintenance — 1Removal and Installation — 1Disassembly and Assembly — 1Preparation. High Voltage Cooling System — 1Description — 1Symptom Diagnosis. Overheating Cause Analysis — 1Periodic Maintenance — 1Coolant — 1Removal and Installation — 1Radiator — 1Service Data — 1Removal and Installation. Accelerator Control System — 1Reduction Gear: Re1f62a — 1Removal and Installation — 1Transaxle & Transmission :: Electric Shift — 1Description — 3Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Rear Final Drive: Rn1r62a — 1Removal and Installation — 1Preparation. Front Axle System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data. Front Drive Shaft — 12wd — 14wd — 1Periodic Maintenance — 1Removal and Installation — 1Preparation. Front Suspension System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Road Wheels & Tires System — 1Description — 1System — 1Ecu Diagnosis Information. Bcm (body Control Module) — 1Tpms — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Road Wheels & Tires — 1Removal and Installation — 1Service Data — 1Preparation. Brake System — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Electrically-Driven Intelligent Brake Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Parking Brake System — 1System Description — 1Component Parts — 1System — 1Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit) — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Brake Control System :: With Vdc — 1System Description — 3Basic Inspection — 2Dtc/circuit Diagnosis — 1Symptom Diagnosis — 2Removal and Installation — 1Brake Control System :: Automatic Brake Hold — 1System Description — 3Component Parts /circuit Diagnosis — 1Removal and Installation — 1Brake Control System :: E-Step — 1System Description — 3Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Symptom Diagnosis — 1Rear Automatic Braking — 1System Description — 1Basic Inspection — 1Preparation. Steering System — 1System Description — 1Component Parts — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Steering Wheel — 1Removal and Installation — 1Service Data — 1System Description — 1Component Parts — 1Steering Control System — 1Ecu Diagnosis Information. Power Steering Control Module — 1Dtc/circuit Diagnosis — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation. Power Steering Control Module — 1System Description — 1Removal and Installation — 1System Description — 1System — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Component Parts — 1Basic Inspection — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information. Air Bag Diagnosis Sensor Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1System Description. Description. Ventilation System — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1Basic Inspection — 1Symptom Diagnosis — 1Removal and Installation — 1Electric Compressor — 1Cooler Pipe and Hose — 1A/c Unit Assembly Cover — 1A/c Unit Assembly — 1Heater & Air Conditioning Control System :: Automatic Air Conditioning — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 2Dtc Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 2Preparation. Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Preparation. Instrument Panel — 1Component Parts — 1System — 1Ecu Diagnosis Information. Flexible Center Storage Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information. Driver Lumbar Support Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Manual Function Does Not Operate — 1Memory Function Does Not Operate — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1System (intelligent Key System) — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1U2141-87 Can Comm Circuit — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Automatic Back Door Operation Does Not Operate — 1Back Door Does Not Open — 1Door Does Not Lock/unlock with Door Lock and Unlock Switch — 1Removal and Installation — 1Hood — 1Radiator Core Support — 1Charge Port Lid — 1Front Fender — 1Front Door — 1Rear Door — 1Back Door — 1Hood Lock — 1Front Door Lock — 1Rear Door Lock — 1Back Door Lock — 1Outside Key Antenna — 1System Description — 1System — 1Ecu Diagnosis Information. Inverter (front), Inverter (rear), Bcm, Intelligent Key Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Front Passenger Side Power Window Does Not Operate — 1Rear Lh Side Power Window Does Not Operate — 1Rear Rh Side Power Window Does Not Operate — 1Removal and Installation. Power Window Main Switch — 1Preparation. Preparation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Sunroof Switch Assembly — 1Symptom Diagnosis — 1Auto Operation Does Not Operate — 1Removal and Installation — 1Preparation — 1Description — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Service Information — 6Repair Information — 1Precaution — 1Preparation — 1Removal and Installation — 1Service Data — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information — 1Wiring Diagram. Door Mirror — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Removal and Installation — 1Exterior Lighting System :: Led Headlamp — 1System Description — 3Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1System Description — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm, Intelligent Key Unit — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis. Interior Lighting System Symptom — 1Removal and Installation — 1Service Data. Bulb Specifications — 1System Description — 1System — 1Ecu Diagnosis Information. Bcm, Ipdm E/r — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Removal and Installation. Horn — 1Preparation. Commercial Service Tools Or/and Repair Part — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Approaching Vehicle Sound for Pedestrians (vsp) Control Unit — 1Approaching Vehicle Sound for Pedestrians (vsp) — 1Vsp [approaching Vehicle Sound for Pedestrians (vsp) Control Unit] — 1Approaching Vehicle Sound for Pedestrians (vsp) System — 1Removal and Installation — 1Removal and Installation — 1Wireless Charger — 1System Description — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Removal and Installation — 1Component Parts — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Can Fundamental — 1Description — 1Trouble Diagnosis — 1Can (controller Area Network) — 1Description — 1
~16min read
  • Component Parts
  • System. Warning/indicator/chime List
  • Diagnosis System [approaching Vehicle Sound for Pedestrians (vsp) Control Unit]

System. Warning/indicator/chime List Nissan Ariya

System Description

SYSTEM DIAGRAM

ComponentFunction
Combination meter
  • Transmits the Nissan Ariya vehicle speed signal to the VSP control unit via the CAN communication.

  • Transmits VSP warning lamp signal via CAN communication for VSP control unit.

VCM

Transmits the following signals to the VSP control unit via the CAN communication:

  • READY to drive indicator lamp request signal

  • Charge sound request signal

  • Shift position signal

BCM Transmits the stop lamp switch signal to the VSP control unit via the CAN communication.
Approaching Nissan Ariya vehicle sound for pedestrians (VSP) control unit Refer to Component Description.
Approaching Nissan Ariya vehicle sound for pedestrians (VSP) speaker Refer to Component Description.

VSP Control Unit Input Signal (CAN Communication)

Transmit unitSignal name
Combination meter Nissan Ariya Vehicle speed signal
VCM READY to drive indicator lamp request signal
Charge sound request signal
Shift position signal
BCM Stop lamp switch signal

VSP Control Unit Output Signal (CAN Communication)

Transmit unitSignal name
Combination meter VSP warning lamp signal

DESCRIPTION

  • The VSP control unit receives necessary signals from each unit, switch, and sensor to control the following functions:

    • VSP system

    • Charge sound system

  • The VSP control unit can be diagnosed with CONSULT.

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SYSTEM

DESCRIPTION

  • The VSP system operates according to the signals received from each unit via CAN communication, and notifies the driver that the Nissan Ariya vehicle is approaching a pedestrian.

  • The VSP system includes the following three types of sound:

    • Idling sound

    • Driving sound

    • Reverse sound

  • The VSP system operation status can be checked with the VSP warning lamp.

  • The VSP system starts operating when the power switch is placed from OFF to READY.

  • The warning lamp illuminates when there is a malfunction in the VSP system.

IDLING SOUND

  • The idling sound is a function that operates according to the vehicle speed.

  • If Nissan Ariya vehicle speeds up, the idling sound will change to "driving sound". At the time vehicle is sound will stop.

  • The idling sound will stop when Nissan Ariya vehicle is in "P range" and vehicle speed of 0 km/h.

  • If vehicle changes to "R range", sound will change to "Reverse sound".

DRIVING SOUND

  • The driving sound is a function that operates according to the vehicle speed.

  • The driving sound tone frequency changes according to the Nissan Ariya vehicle speed.

  • When accelerating, driving sound operates until the speed reaches approximately 40 km/h. When decelerating, it starts operating at approximately 35 km/h.

  • Operation stops when the Nissan Ariya vehicle stops or the vehicle speed is 0 km/h.

Operation Description

  • The combination meter transmits the vehicle speed signal to the VSP control unit via CAN communication.

  • The VCM transmits the following signals to the VSP control unit via CAN communication:

    • READY to drive indicator lamp request signal

    • Shift position signal

  • The VSP control unit judges that the driving sound is necessary according to the signals received from the combination meter and VCM via CAN communication.

  • When the VSP control unit judges that operation of the driving sound is necessary, it transmits the VSP speaker signal to the VSP speakers.

Operation Condition

The driving sound operates when all of the following conditions are met:

Operation condition
Nissan Ariya Vehicle speed During acceleration 1 km/h or more
During deceleration 35 km/h or less
READY to drive indicator lamp ON
Selector lever “D” Position

Operation Stop Condition

The driving sound stops operating when any of the following conditions is met:

Operation stop condition
Nissan Ariya Vehicle speed During acceleration Higher than 40 km/h
During deceleration Less than 1 km/h
READY to drive indicator lamp OFF

Signal Path

  • The VSP control unit judges that the driving sound is necessary according to the following signals, and operates the driving sound:

    Signal nameSignal path
    READY to drive indicator lamp request signal VCM VSP control unit
    Shift position signal VCM VSP control unit
    Nissan Ariya Vehicle speed signal Combination meter VSP control unit
  • When the VSP control unit judges that the driving sound is necessary, it transmits the following signal:

    Signal nameSignal path
    VSP speaker signal VSP control unit VSP speakers

Timing Chart

No.Description
When accelerating, the driving sound operates up to approximately 40 km/h.
When the speed is more than 40 km/h, the driving sound stops.
When decelerating, the driving sound operates when the speed is approximately 35 km/h or less.
The driving sound stops when the Nissan Ariya vehicle is stopped (fades out and stops) and start the idel sound.(fade in).

REVERSE SOUND

The reverse sound is a function that operates when the selector lever is in the “R” position.

Operation Description

  • The VCM transmits the following signals to the VSP control unit via CAN communication:

    • Shift position signal

    • READY to drive indicator lamp request signal

  • The VSP control unit judges that the reverse sound is necessary according to the signals received from the VCM.

  • When the VSP control unit judges that operation of the reverse sound is necessary, it transmits the VSP speaker signal to the VSP speakers.

Operation Condition

The reverse sound operates when all of the following conditions are met:

Operation condition
Selector lever “R” position
READY to drive indicator lamp ON

Operation Stop Condition

The reverse sound operation stops when any of the following conditions is met:

Operation stop condition
Selector lever Other than “R” position

Signal Path

  • The VSP control unit judges that the reverse sound is necessary according to the following signals, and operates the reverse sound:

    Signal nameSignal path
    READY to drive indicator lamp request signal VCM VSP control unit
    Shift position signal VCM VSP control unit
  • When the VSP control unit judges that the reverse sound is necessary, it transmits the following signal:

    Signal nameSignal path
    VSP speaker signal VSP control unit VSP speakers

Timing Chart

No.Description
The reverse sound operates when the selector lever is moved to the “R” position.
Operation of the reverse sound stops when the selector lever is moved to any position other than the “R” position.

VSP SYSTEM MALFUNCTION DETECTION FUNCTION

When a malfunction is detected in the VSP system, the warning lamp turns ON.

Signal Path

When the VSP control unit detects a VSP system malfunction, it sends the VSP warning lamp signal to the combination meter via CAN communication.

Signal nameSignal path
VSP warning lamp signal VSP control unit combination meter

CHARGE SOUND SYSTEM

Description

  • The charge sound system is a function which notifies the charge connector connected status, charge reception status, and charge port lid unlocked/normal charge connector unlocked status by the charge sound request signal from VCM.

  • The charge sound system includes the following three sound types and operates linked with the charging status indicator:

    • Plug-in detection sound

    • Charge acceptance sound

    • Charge port lid unlocked sound/normal charge connector unlocked sound

PLUG-IN DETECTION SOUND

  • The plug-in detection sound notifies that the charger is engaged correctly.

  • During rapid charging, the plug-in detection sound does not operate.

Operation Description

  • The VCM transmits the charge sound request signal (plug-in detection sound) to the VSP control unit via CAN communication.

  • The VSP control unit judges that the plug-in detection sound is necessary according to the charge sound request signal (plug-in detection sound) from the VCM.

  • When the VSP control unit judges that operation of the plug-in detection sound is necessary, it transmits the VSP speaker signal to the VSP speakers.

Operation Condition

The plug-in detection sound operates when all of the following conditions are met:

Operation condition
Normal charge connector Normal connection

Signal Path

  • The VSP control unit judges that the plug-in detection sound is necessary according to the following signal, and operates the plug-in detection sound:

    Signal nameSignal path
    Charge sound request signal (plug-in detection sound) VCM VSP control unit
  • When the VSP control unit judges that the plug-in detection sound is necessary, it transmits the following signal:

    Signal nameSignal path
    VSP speaker signal VSP control unit VSP speakers

Timing Chart

No.Description
The plug-in detection sound operates when the normal charge connector is connected normally.
The operation time for the plug-in detection sound ends.

CHARGE ACCEPTANCE SOUND

  • The charge acceptance sound notifies that the charge is accepted.

  • The charge acceptance sound does not operate when the power switch ON.

Operation Description

  • The VCM transmits the charge sound request signal (charge acceptance sound) to the VSP control unit via CAN communication.

  • The VSP control unit judges that the charge acceptance sound is necessary according to the charge sound request signal (charge acceptance sound) from the VCM.

  • When the VSP control unit judges that operation of the charge acceptance sound is necessary, it transmits the VSP speaker signal to the VSP speakers.

Operation Condition

The charge acceptance sound operates when all of the following conditions are met:

Operation condition
Power switch OFF
Charging Started*

*: Includes time waiting for timer charge acceptance.

Signal Path

  • The VSP control unit judges that the charge acceptance sound is necessary according to the following signal, and operates the charge acceptance sound:

    Signal nameSignal path
    Charge sound request signal (charge acceptance sound) VCM VSP control unit
  • When the VSP control unit judges that the charge acceptance sound is necessary, it transmits the following signal:

    Signal nameSignal path
    VSP speaker signal VSP control unit VSP speakers

Timing Chart

No.Description
The charge acceptance sound operates when charging is started.
The operation time of the charge acceptance sound ends.

CHARGE PORT LID UNLOCKED SOUND/NORMAL CHARGE CONNECTOR UNLOCKED SOUND

  • The charge port lid unlocked sound is a function which notifies that the charge port lid is unlocked when the charge port lid opener switch or charge port lid opener button is operated.

  • The normal charge connector unlocked sound is a function that notifies that the normal charge connector is unlocked when the charge port lid opener switch or charge port lid opener button is operated.

Operation Description

  • The VCM transmits the charge sound request signal (charge port lid unlocked sound/normal charge connector unlocked sound) to the VSP control unit via CAN communication.

  • The VSP control unit judges that the charge port lid unlocked sound/normal charge connector unlocked sound is necessary according to the charge sound request signal (charge port lid unlocked sound/normal charge connector unlocked sound) from the VCM.

  • When the VSP control unit judges that operation of the charge port lid unlocked sound/normal charge connector unlocked sound is necessary, it transmits the VSP speaker signal to the VSP speakers.

Operation Condition

The charge port lid unlocked sound/normal charge connector unlocked sound operates when any of the following conditions is met:

Operation condition
Charge port lid opener switch When pressed
Charge port lid opener button When pressed

Signal Path

  • The VSP control unit judges that the charge port lid unlocked sound/normal charge connector unlocked sound is necessary according to the following signal, and operates the charge port lid unlocked/normal charging connector unlocked sound:

    Signal nameSignal path
    Charge sound request signal (charge port lid unlocked sound/normal charge connector unlocked sound) VCM VSP control unit
  • When the VSP control unit judges that the charge port lid unlocked sound/normal charge connector unlocked sound is necessary, it transmits the following signal:

    Signal nameSignal path
    VSP speaker signal VSP control unit VSP speakers

Timing Chart

No.Description
The charge port lid unlocked sound operates when the charge port lid is unlocked.
The operation time for the charge port lid unlocked sound/normal charge connector unlocked sound ends.
The normal charge connector unlocked sound operates when the normal charge connector is unlocked.

NORMAL CHARGE CONNECTOR IMPROPER CONNECTION WARNING SOUND

The normal charge connector improper connection warning sound is a function that notifies the user when the normal charge connector is not connected normally (improper connection).

Operation Description

  • The VCM transmits the charge sound request signal (normal charge connector improper connection warning sound) to the VSP control unit via CAN communication.

  • The VSP control unit judges that the normal charge connector improper connection warning sound is necessary according to the charge sound request signal (normal charge connector improper connection warning sound) from the VCM.

  • When the VSP control unit judges that the normal charge connector improper connection warning sound is necessary, it transmits the VSP speaker signal to the VSP speakers.

Operation Condition

Three seconds after the following condition is met the normal charge connector improper connection warning sound operates for 30 seconds:

Operation condition
Normal charge connector

Improper connection detected.

(Release button is depressed.)

Operation Stop Condition

When any of the following conditions is met, the normal charge connector improper connection warning sound is stopped:

Operation stop condition
Normal charge connector Normal connection
The normal charge connector is disconnected.

Signal Path

  • The VSP control unit judges that the normal charge connector improper connection warning sound is necessary according to the following signal, and operates the normal charge connector improper connection warning sound:

    Signal nameSignal path
    Charge sound request signal (normal charge connector improper connection warning sound) VCM VSP control unit
  • When the VSP control unit judges that the normal charge connector improper connection warning sound is necessary, it transmits the following signal:

    Signal nameSignal path
    VSP speaker signal VSP control unit VSP speakers

Timing Chart

No.Description
The normal charge connector improper connection warning sound operates 3 seconds after improper connection of the normal charge connector is detected.
The operation time for the normal charge connector improper connection warning sound ends.
Normal charge connector improper connection warning sound stop condition is met.

Circuit Diagram

Fail-safe

When a malfunction occurs in the VSP control unit, fail-safe control is performed according to the malfunction.

DTCFail-safe condition
B2860–87
  • VSP system: Function stops with internal error of VSP control unit system.

  • Speakers inoperative

B2861–87
  • LH Speaker: Output issue of LH Speaker

  • LH speaker inoperative

B2862–87
  • RH Speaker: Output issue of RH Speaker

  • RH speaker inoperative

B2863–87
  • VSP system: Function stops due to power supply issue.

  • Speakers inoperative

B2864–87
  • VSP system: VSP control unit activation error.

  • Speakers inoperative

U0075–00
  • VSP system: Function stops when there is a communication break.

  • Charge sound system: Does not operate.

Approaching Vehicle Sound For Pedestrians (VSP) Warning Lamp

NameDesignLayout/Function
VSP warning lamp For layout: Refer to Design.
For function: Refer to VSP Warning Lamp.

Diagnosis System [approaching Vehicle Sound for Pedestrians (vsp) Control Unit] Nissan Ariya

Diagnosis Description

APPLICATION ITEM

CONSULT can display each diagnostic item using the diagnostic test modes shown as per the following:

Test modeFunction
Self Diagnostic Results Displays the name of a malfunctioning system stored in the VSP control unit
Data Monitor Displays VSP control unit input/output data in real time.
Active Test Gives a drive signal to a load to check the operation.
Work support Change the setting for VSP system function.
Ecu Identification Displays VSP control unit part number
Network-DTC Display network DTC which VSP control unit memorizes when performing "Diagnosis (All System)".

SELF-DIAGNOSTIC RESULTS

Refer to DTC Index.

When “CRNT” is displayed on self-diagnosis result,

  • The system is presently malfunctioning.

When “PAST” is displayed on self-diagnosis result,

  • System malfunction in the past is detected, but the system is presently normal.

Freeze frame data (FFD)

Item nameDisplay item

Odo/trip meter

(km)

Records an odometer value when DTC is detected.

  • Current odometer value is shown when the displayed DTC means a present malfunction.

  • Odometer value of the time of returning to normal is shown when the displayed DTC means a past malfunction.

DATA MONITOR

Monitor itemDescription

VSP off indicator

(OFF/ON)
Status of VSP warning lamp judged from VSP warning lamp signal transmitted from the VSP control unit.

VSP system sound status

(OFF/Start/Drive/Reverse)
Status of VSP system sound.

Charge sound status

(OFF/Plug in/Charge status/Unlock)
Status of charge sound.

Ignition status signal

(OFF/ON)
ON/OFF status of power switch judged by VSP control unit.

VSP off switch

(OFF/ON)

VSP sound

(OFF/ON)
Status of VSP system sound cancellation.

Power train status

(OFF/ON)

Charge sound request

(OFF/Plug in/Charge status/Unlock)
Status of charge sound request signal received from VCM via CAN communication.

Reverse buzzer

(ON/OFF)
Status of reverse warning judged from reverse warning signal received from combination meter via CAN communication.

Nissan Ariya Vehicle speed (meter)

(km/h)

Vehicle speed signal value received from the combination meter via CAN communication.

Shift position signal

(OFF/P/R/N/D)
Status of shift position signal received from VCM via CAN communication.
Engine speed

ACTIVE TEST

Active test itemFunction
VSP off indicator

The VSP OFF indicator operation can be checked.

VSP speaker LH

The VSP speaker operation can be checked.

VSP speaker RH

The VSP speaker operation can be checked.

WORK SUPPORT

Work support itemSetting itemDescription
VSP activation setting VSP activation setting VSP activation setting is set to VSP OFF at production.

ECU IDENTIFICATION

VSP control unit part number can be read.