Rear Final Drive: Rn1r62a
- Preparation. Rear Final Drive
- Description. Mechanical System. Rear Final Drive
- Periodic Maintenance. Rear Final Drive Oil
- Removal and Installation
- Service Data and Specifications (sds)
Preparation. Rear Final Drive Nissan Ariya
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
Socket a: 8 mm (0.31 in) b: 5 mm (0.20 in) |
![]() |
Removing and installing drain plug |
| Oil seal remover | ![]() |
|
Drift a: 55 mm (2.17 in) dia. b: 50 mm (1.97 in) dia. |
![]() |
Installing side oil seal (left side) |
Drift a: 48.7 mm (1.917 in) dia. b: 42.3 mm (1.665 in) dia. c: 200 mm (7.87 in) |
![]() |
Installing side oil seal (right side) |
Drift a: 46 mm (1.81 in) dia. b: 40 mm (1.57 in) dia. |
![]() |
Installing shaft oil seal |
| Power tool | ![]() |
Loosening bolts and nuts |
Lubricant or/and Sealant
| Item | Use |
|---|---|
| Lithium-based grease including molybdenum disulphide | Application to the inside of rear final drive unit input shaft (insertion part of rear traction motor shaft splines) |
Description. Mechanical System. Rear Final Drive Nissan Ariya
Structure
EARTH BRUSH
An earth brush
is installed on the end of the shaft of input gear, grounding electrical noise transmitted from the motor shaft to the case of rear final drive.

Sectional View

| Input gear | Mainshaft gear | Mainshaft | |||
| Final gear |
Periodic Maintenance. Rear Final Drive Oil Nissan Ariya
Exploded View

| Filler plug | Gasket | Drain plug | |||
| Gasket | Rear final drive assembly | ||||
Inspection
OIL LEAKAGE
Remove rear diffuser during working. Refer to Removal & Installation.
Check final drive assembly surrounding area (oil seal, drain plug, and filler plug etc.) for oil leakage.
OIL LEVEL
Remove rear diffuser during working. Refer to Removal & Installation.
Check oil level from filler plug mounting hole as shown in the figure, after removing filler plug
and gasket from final drive assembly.

Oil level should be level with bottom of filler plug mounting hole. Add gear oil if necessary.
Set a gasket on filler plug and install it on final drive assembly.
Tighten filler plug to the specified torque. Refer to Exploded View.
Draining
Remove rear diffuser during working. Refer to Removal & Installation.
Power switch OFF.
Remove drain plug
and gasket, using a socket (commercial service tool) and then drain gear oil.

Set a gasket on drain plug and install it to final drive assembly, using a socket (commercial service tool).
Tighten drain plug to the specified torque. Refer to Exploded View.
Refilling
Remove rear diffuser during working. Refer to Removal & Installation.
Fill with new gear oil until oil level reaches the specified level
near filler plug mounting hole, after removing filler plug
and gasket from final drive assembly.

| Recommended oil and capacity | : Refer to MAINTENANCE : Recommended Fluid and Lubricants. |
Leave the Nissan Ariya vehicle for 3 minutes, and check the oil level again. Refer to Inspection.
Set a gasket on filler plug, and install it to final drive assembly.
Tighten filler plug to the specified torque. Refer to Exploded View.
Service Data and Specifications (sds) Nissan Ariya: FE0
Specifications
| Model | RN1R62A | |
|---|---|---|
| Final gear ratio | 7.679 | |
| Number of gear tooth | Input gear | 21 |
| Main gear (In/Out) | 41/15 | |
| Final gear | 59 | |




