Cplc (cplc)
- B2b01-87 Communication Error
- B2b03-96 Internal Error
- B2b04-55 Configuration
- B2b05-16 Charge Voltage
B2b01-87 Communication Error Nissan Ariya 2026
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms | DTC detecting condition | ||
|---|---|---|---|---|
| B2B01 | 87 | Communication error | Diagnosis condition | During quick charge |
| Signal | — | |||
| Threshold | When communication with the VCM is interrupted while charging | |||
| Detection time | — | |||
POSSIBLE CAUSE
CAN communication circuit
FAIL-SAFE
Quick charge is stopped
Confirmation Procedure
CHECK DTC PRIORITY
If DTC B2B01-87 is displayed with B2B03-96, first perform the trouble diagnosis for B2B03-96.
Is applicable DTC detected?
YES>>Perform trouble diagnosis for applicable DTC. Refer to DTC Description.
NO>>GO TO 2.
PRECONDITIONING
Erase “self-diagnostic result” in “CALCULATOR POWER LINE COMMUNICATION” using CONSULT.
Turn the power switch OFF with the driver's side door open, get out of the Nissan Ariya vehicle, close the driver's side door and wait for at least 3 minutes.
Check that 12V battery voltage is 11 V or more.
GO TO 3.
PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
Perform quick charge for at least 10 seconds.
Power switch ON and wait for at least 10 seconds.
Check “self-diagnostic result” in “CALCULATOR POWER LINE COMMUNICATION” using CONSULT.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
PERFORM VCM DIAGNOSIS
Perform VCM diagnosis. Refer to DTC Index.
Is DTC detected?
YES>>Perform the trouble shooting relevant to the DTC indicated.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With CONSULT
Perform DTC confirmation procedure again. Refer to Confirmation Procedure.
Is DTC B2B01-87 detected again?
YES>>Perform trouble diagnosis for CAN communication circuit. Refer to Trouble Diagnosis Flow Chart.
NO>>INSPECTION END
B2b03-96 Internal Error Nissan Ariya SUV
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms | DTC detecting condition | ||
|---|---|---|---|---|
| B2B03 | 96 | Internal error | Diagnosis condition | Power switch ON |
| Signal | — | |||
| Threshold | When an internal error is detected | |||
| Detection time | 5 seconds | |||
POSSIBLE CAUSE
CPLC
FAIL-SAFE
Not applicable
Confirmation Procedure
PRECONDITIONING
Erase “self-diagnostic result” in “CALCULATOR POWER LINE COMMUNICATION” using CONSULT.
Turn the power switch OFF with the driver's side door open, get out of the Nissan Ariya vehicle, close the driver's side door and wait for at least 3 minutes.
Check that 12V battery voltage is 11 V or more.
GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
Power switch ON and wait for at least 5 seconds.
Check “self-diagnostic result” in “CALCULATOR POWER LINE COMMUNICATION” using CONSULT.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With CONSULT
Perform DTC confirmation procedure again. Refer to Confirmation Procedure.
Is DTC B2B03-96 detected again?
YES>>Replace CPLC. Refer to CPLC : Removal & Installation.
NO>>INSPECTION END
B2b04-55 Configuration Nissan Ariya first Gen
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms | DTC detecting condition | ||
|---|---|---|---|---|
| B2B04 | 55 | Configuration | Diagnosis condition | Power switch ON |
| Signal | — | |||
| Threshold | When a configuration is not performed | |||
| Detection time | 5 seconds | |||
POSSIBLE CAUSE
Configuration is incomplete
FAIL-SAFE
Not applicable
Confirmation Procedure
CHECK DTC PRIORITY
If DTC B2B04-55 is displayed with B2B03-96, first perform the trouble diagnosis for B2B03-96.
Is applicable DTC detected?
YES>>Perform trouble diagnosis for applicable DTC. Refer to DTC Description.
NO>>GO TO 2.
PRECONDITIONING
Erase “self-diagnostic result” in “CALCULATOR POWER LINE COMMUNICATION” using CONSULT.
Turn the power switch OFF with the driver's side door open, get out of the Nissan Ariya vehicle, close the driver's side door and wait for at least 3 minutes.
Check that 12V battery voltage is 11 V or more.
GO TO 3.
PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
Power switch ON and wait for at least 5 seconds.
Check “self-diagnostic result” in “CALCULATOR POWER LINE COMMUNICATION” using CONSULT.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
Perform Configuration. Refer to Work Procedure.
B2b05-16 Charge Voltage Nissan Ariya 2023
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms | DTC detecting condition | ||
|---|---|---|---|---|
| B2B05 | 16 | Voltage too low | Diagnosis condition | Power switch ON |
| Signal | — | |||
| Threshold | 12V battery voltage is too low | |||
| Detection time | 5 seconds | |||
POSSIBLE CAUSE
VCM
Quick charger
CPLC
12V battery
FAIL-SAFE
Not applicable
Confirmation Procedure
CHECK DTC PRIORITY
If DTC B2B05-16 is displayed with B2B03-96, first perform the trouble diagnosis for B2B03-96.
Is applicable DTC detected?
YES>>Perform trouble diagnosis for applicable DTC. Refer to DTC Description.
NO>>GO TO 2.
PRECONDITIONING
Erase “self-diagnostic result” in “CALCULATOR POWER LINE COMMUNICATION” using CONSULT.
Turn the power switch OFF with the driver's side door open, get out of the Nissan Ariya vehicle, close the driver's side door and wait for at least 3 minutes.
Check that 12V battery voltage is 11 V or more.
GO TO 3.
PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
Power switch ON and wait for at least 5 seconds.
Check “self-diagnostic result” in “CALCULATOR POWER LINE COMMUNICATION” using CONSULT.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
PERFORM VCM DIAGNOSIS
Perform VCM diagnosis. Refer to DTC Index.
Is DTC detected?
YES>>Perform the trouble shooting relevant to the DTC indicated.
NO>>GO TO 2.
CHECK 12V BATTERY
Check the 12V battery. Refer to Work Flow.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Replace 12V battery. Refer to 12V BATTERY : Removal & Installation.
CHECK QUICK CHARGER HARNESS
Check quick charger harness.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace error-detected parts.
CHECK QUICK CHARGER
Check quick charger for any malfunction.
Is the inspection result normal?
YES>>Replace CPLC. Refer to CPLC : Removal & Installation.
NO>>Repair or replace error-detected parts.