System

In this manual: System
How to Use This Manual — 1Precautions — 1Preparation — 1Vehicle Information — 1Basic Inspection — 1Preparation. Commercial Service Tools Or/and Repair Part — 1Description — 1Component Parts — 1System — 1Diagnosis System (vcm) — 1Ecu Diagnosis Information. Vcm — 1Ev Control System — 1Ev/hev (vcm) — 1Component Parts /circuit Diagnosis — 1Ev Control System — 1Periodic Maintenance. Ev System Warning Lamp — 1Removal and Installation. Vcm — 1Traction Motor System :: Front Traction Motor — 1Preparation — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Traction Motor System :: Rear Traction Motor — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Ev Battery System :: 66kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 2Service Data — 1Ev Battery System :: 91kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 1Service Data — 2Preparation. Vehicle Charging System — 1Vehicle Charging System :: Description — 1Component Parts — 2System — 1Diagnosis System (on-Board Charger) — 1Diagnosis System (dc/dc Converter) — 1Ecu Diagnosis Information — 1Vehicle Charging System — 1Charger/pd Module (on-Board Charger) — 1Cplc (cplc) — 1Dcdc (dc/dc Converter) — 1Component Parts/circuit Diagnosis — 1Symptom Diagnosis — 1Evse Inspection — 1Periodic Maintenance — 1Removal and Installation — 1Disassembly and Assembly — 1Preparation. High Voltage Cooling System — 1Description — 1Symptom Diagnosis. Overheating Cause Analysis — 1Periodic Maintenance — 1Coolant — 1Removal and Installation — 1Radiator — 1Service Data — 1Removal and Installation. Accelerator Control System — 1Reduction Gear: Re1f62a — 1Removal and Installation — 1Transaxle & Transmission :: Electric Shift — 1Description — 3Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Rear Final Drive: Rn1r62a — 1Removal and Installation — 1Preparation. Front Axle System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data. Front Drive Shaft — 12wd — 14wd — 1Periodic Maintenance — 1Removal and Installation — 1Preparation. Front Suspension System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Road Wheels & Tires System — 1Description — 1System — 1Ecu Diagnosis Information. Bcm (body Control Module) — 1Tpms — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Road Wheels & Tires — 1Removal and Installation — 1Service Data — 1Preparation. Brake System — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Electrically-Driven Intelligent Brake Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Parking Brake System — 1System Description — 1Component Parts — 1System — 1Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit) — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Brake Control System :: With Vdc — 1System Description — 3Basic Inspection — 2Dtc/circuit Diagnosis — 1Symptom Diagnosis — 2Removal and Installation — 1Brake Control System :: Automatic Brake Hold — 1System Description — 3Component Parts /circuit Diagnosis — 1Removal and Installation — 1Brake Control System :: E-Step — 1System Description — 3Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Symptom Diagnosis — 1Rear Automatic Braking — 1System Description — 1Basic Inspection — 1Preparation. Steering System — 1System Description — 1Component Parts — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Steering Wheel — 1Removal and Installation — 1Service Data — 1System Description — 1Component Parts — 1Steering Control System — 1Ecu Diagnosis Information. Power Steering Control Module — 1Dtc/circuit Diagnosis — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation. Power Steering Control Module — 1System Description — 1Removal and Installation — 1System Description — 1System — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Component Parts — 1Basic Inspection — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information. Air Bag Diagnosis Sensor Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1System Description. Description. Ventilation System — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1Basic Inspection — 1Symptom Diagnosis — 1Removal and Installation — 1Electric Compressor — 1Cooler Pipe and Hose — 1A/c Unit Assembly Cover — 1A/c Unit Assembly — 1Heater & Air Conditioning Control System :: Automatic Air Conditioning — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 2Dtc Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 2Preparation. Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Preparation. Instrument Panel — 1Component Parts — 1System — 1Ecu Diagnosis Information. Flexible Center Storage Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information. Driver Lumbar Support Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Manual Function Does Not Operate — 1Memory Function Does Not Operate — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1System (intelligent Key System) — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1U2141-87 Can Comm Circuit — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Automatic Back Door Operation Does Not Operate — 1Back Door Does Not Open — 1Door Does Not Lock/unlock with Door Lock and Unlock Switch — 1Removal and Installation — 1Hood — 1Radiator Core Support — 1Charge Port Lid — 1Front Fender — 1Front Door — 1Rear Door — 1Back Door — 1Hood Lock — 1Front Door Lock — 1Rear Door Lock — 1Back Door Lock — 1Outside Key Antenna — 1System Description — 1System — 1Ecu Diagnosis Information. Inverter (front), Inverter (rear), Bcm, Intelligent Key Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Front Passenger Side Power Window Does Not Operate — 1Rear Lh Side Power Window Does Not Operate — 1Rear Rh Side Power Window Does Not Operate — 1Removal and Installation. Power Window Main Switch — 1Preparation. Preparation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Sunroof Switch Assembly — 1Symptom Diagnosis — 1Auto Operation Does Not Operate — 1Removal and Installation — 1Preparation — 1Description — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Service Information — 6Repair Information — 1Precaution — 1Preparation — 1Removal and Installation — 1Service Data — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information — 1Wiring Diagram. Door Mirror — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Removal and Installation — 1Exterior Lighting System :: Led Headlamp — 1System Description — 3Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1System Description — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm, Intelligent Key Unit — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis. Interior Lighting System Symptom — 1Removal and Installation — 1Service Data. Bulb Specifications — 1System Description — 1System — 1Ecu Diagnosis Information. Bcm, Ipdm E/r — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Removal and Installation. Horn — 1Preparation. Commercial Service Tools Or/and Repair Part — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Approaching Vehicle Sound for Pedestrians (vsp) Control Unit — 1Approaching Vehicle Sound for Pedestrians (vsp) — 1Vsp [approaching Vehicle Sound for Pedestrians (vsp) Control Unit] — 1Approaching Vehicle Sound for Pedestrians (vsp) System — 1Removal and Installation — 1Removal and Installation — 1Wireless Charger — 1System Description — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Removal and Installation — 1Component Parts — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Can Fundamental — 1Description — 1Trouble Diagnosis — 1Can (controller Area Network) — 1Description — 1
4steps
~24min
3/5difficulty
Done 0 of 4
  • Front Wiper and Washer System (with Light and Rain Sensor)
  • Rear Wiper and Washer System
  • Information Display (combination Meter)
  • Warning/indicator/chime List

Front Wiper and Washer System (with Light and Rain Sensor) Nissan Ariya 2023

System Description

SYSTEM DIAGRAM

ComponentFunction
Front wiper motor Refer to Front Wiper Motor..
IPDM E/R Controls integrated relays according to the request (via CAN communication) from BCM.
BCM
  • Judges each switch status by the combination switch reading function.

  • Requests (via CAN communication) the front wiper relay, the front wiper HI/LO relay and front washer pump relay ON to IPDM E/R.

  • Transmits front washer pump request signal to IPDM E/R via CAN communication.

Combination switch (wiper & washer switch) Wiper switch Transmits the status of the combination switch to BCM.
Washer switch
Front washer pump relay Controls washer pump according to the request from IPDM E/R.
ABS actuator and electric unit (control unit) Transmits Nissan Ariya vehicle speed signal to BCM via CAN communication.
Washer pump Refer to Washer pump.
Light & rain sensor Refer to Light And Rain Sensor.

OUTLINE

The front wiper is controlled by each function of BCM and IPDM E/R.

Control by BCM

  • Combination switch reading function

  • Front wiper control function

  • Front washer pump control function

Control by IPDM E/R

  • Front wiper control function

  • Relay control function

  • Front washer pump control function

FRONT WIPER BASIC OPERATION

  • BCM detects the combination switch condition by the combination switch reading function.

  • BCM transmits the front wiper request signal to IPDM E/R via CAN communication depending on each operating condition of the front wiper.

  • IPDM E/R turns ON/OFF the integrated front wiper relay and the front wiper HI/LO relay according to the front wiper request signal. IPDM E/R provides the power supply to operate the front wiper HI/LO operation.

FRONT WIPER LO OPERATION

  • BCM transmits the front wiper request signal (LOW) to IPDM E/R via CAN communication according to the front wiper LO operating condition.

    Front wiper LO operating condition

    • Power switch ON

    • Front wiper switch LO or front wiper switch MIST (while pressing)

  • IPDM E/R turns ON the integrated front wiper relay according to the front wiper request signal (LOW).

FRONT WIPER HI OPERATION

  • BCM transmits the front wiper request signal (HIGH) to IPDM E/R via CAN communication according to the front wiper HI operating condition.

    Front wiper HI operating condition

    • Power switch ON

    • Front wiper switch HI

  • IPDM E/R turns ON the integrated front wiper relay and the front wiper HI/LO relay according to the front wiper request signal (HIGH).

FRONT WIPER AUTO OPERATION

The light & rain sensor change the front wiper operating speed according to the detected rain conditions and Nissan Ariya vehicle conditions.

Rain Detection

Rain level and sensor conditions are detected by light & rain sensor.

  • BCM transmits the vehicle conditions (vehicle speed, front wiper condition, light & rain sensor sensitivity setting, etc.) to the light & rain sensor via the LIN communication line.

  • Light & rain sensor judges a wiping speed for front wiper by rain condition and the Nissan Ariya vehicle conditions. And it transmits the light & rain sensor signal to the BCM via the light & rain sensor LIN communication line.

Auto Wiping Operation

  • BCM receives the light & rain sensor signal from the light & rain sensor via the LIN communication line.

  • BCM controls front wiper operation according to the wiping speed request signal. And it transmits the front wiper request signal (LOW or HIGH) to the IPDM E/R via CAN communication line.

    Front wiper AUTO operating condition

    • Power switch ON

    • Front wiper switch AUTO

BCM determines light & rain sensor sensitivity according to wiper volume dial position.

  1. Low sensitivity
  2. Low−medium sensitivity
  3. Medium−high sensitivity
  4. High sensitivity

Splash mode operation

Front wiper is operated at HI regardless of the wiper volume adjustment position, when water drops are instantaneously sprayed over the windshield glass due to water splash from oncoming Nissan Ariya vehicles or other causes. After that, AUTO operation is performed depending on the amount of water drops.

SPLASH MODE OPERATION CONDITIONS

  • Front wiper switch AUTO

  • Power switch ON

FRONT WIPER INT OPERATION

  • BCM transmits the front wiper request signal (LOW) to IPDM E/R via CAN communication depending on the front wiper INT operating condition and intermittent operation delay interval according to the wiper volume dial position.

    Front wiper INT operating condition

    • Power switch ON

    • Front wiper switch AUTO

  • IPDM E/R turns ON the integrated front wiper relay so that the front wiper is operated only once according to the front wiper request signal (LOW) and front wiper request signal (RETURN).

  • BCM detects stop position/except stop position of the front wiper motor according to the front wiper stop position signal received from IPDM E/R via CAN communication.

  • BCM transmits the front wiper request signal (LOW) again after the intermittent operation delay interval.

Front wiper intermittent operation with vehicle speed

  • BCM calculates the intermittent operation delay interval from the following

    • Nissan Ariya Vehicle speed signal

    • Wiper volume dial position

Intermittent operation delay Interval

Unit: Second

When the linked with Nissan Ariya vehicle speed is ON
Intermittent operation interval Nissan Ariya Vehicle speed
Accelerating

0 – 5 km/h

(0 – 3,1 mph)

5 – 65 km/h

(3.1 – 40 mph)

65 km/h

(40 mph) or more
Decelerating

0 – 2 km/h

(0 – 1,2 mph)

2 – 60 km/h

(1.2 – 37 mph)

60 km/h

(37 mph) or more

Long

↑

↓

Short
Wiper volume dial position 1 21.0 7.5 4.5
2 11.2 4.0 2.4
3 5.6 2.0 1.2
4 2.8 1.0 0.6

Unit: Second

When the linked with Nissan Ariya vehicle speed is OFF
Intermittent operation interval

Long

↑

↓

Short
Wiper volume dial position 1 15.0
2 8.0
3 4.0
4 2.0

FRONT WIPER AUTO STOP OPERATION

  • BCM transmits the front wiper request signal (RETURN) to IPDM E/R via CAN communication when the front wiper switch is turned OFF.

  • IPDM E/R detects the front wiper stop position signal from the front wiper motor to find out the front wiper motor position (stop position/except stop position).

  • When IPDM E/R receives the front wiper request signal (RETURN) from BCM and the front wiper motor position is not in the stop position, IPDM E/R turns ON the front wiper relay until the front wiper motor returns to the stop position.

  • When the front wiper motor returns to the stop position, IPDM E/R transmits front wiper status signal to BCM via CAN communication.

  • When BCM receives front wiper status signal from IPDM E/R, BCM transmits the front wiper request signal (STOP) to IPDM E/R via CAN communication.

FRONT WIPER OPERATION LINKED WITH WASHER

  • BCM transmits the front wiper request signal (LOW) to IPDM E/R via CAN communication according to the washer linked operating condition of the front wiper.

  • BCM transmits the front wiper request signal (LOW) so that the front wiper operates approximately 2 times when the front washer switch OFF is detected.

    Washer linked operating condition of front wiper

    • Power switch ON

    • Front washer switch ON

  • IPDM E/R turns ON the integrated front wiper relay according to the front wiper request signal (LOW).

  • BCM transmits the front washer pump request signal to IPDM E/R via CAN communication depending on operating condition.

  • IPDM E/R turns ON /OFF the front washer relay according to the front washer pump request signal. IPDM E/R provides the power supply to operate the washer pump.

WIPER LINKED AUTO LIGHTING FUNCTION

When lighting switch is in the AUTO position, front wiper operates, and then headlamp ON. Refer to System Description.

Circuit Diagram

Fail-safe

IPDM E/R

CAN COMMUNICATION CONTROL

When CAN communication with VCM and BCM is impossible, IPDM E/R performs fail-safe control. After CAN communication recovers normally, it also returns to normal control.

If No CAN Communication Is Available With BCM
Control partFail-safe operation
Front wiper
  • The status just before activation of fail-safe control is maintained until the power switch is turned OFF while the front wiper is operating at LO or HI speed.

  • The wiper is operated at LO speed until the power switch is turned OFF if the fail-safe control is activated while the front wiper is set in the INT mode and the front wiper motor is operating.

FRONT WIPER CONTROL

IPDM E/R detects front wiper stop position by front wiper stop position signal.

When front wiper stop position signal is in the condition listed below while the front wiper is operating, IPDM E/R activates the fail-safe.

Power switchFront wiper switchFront wiper stop position signalFail-safe
ON OFF The signal does not change from the battery voltage for 10 seconds. Stops front wiper power supply for 20 seconds
Except OFF The signal does not change for 10 seconds.

Rear Wiper and Washer System Nissan Ariya 1st generation

System Description

SYSTEM DIAGRAM

ComponentFunction
Rear wiper motor Refer to Rear Wiper Motor.
IPDM E/R Controls rear washer pump relay according to the request (via CAN communication) from BCM.
BCM Supplies power to the rear wiper motor
Combination switch (wiper & washer switch) Wiper switch Transmits the status of the combination switch to BCM.
Washer switch
Rear washer pump relay Controls washer pump according to the request from IPDM E/R.
Washer pump Refer to Washer pump.
VCM Transmits the shift position signal to BCM.

OUTLINE

The rear wiper is controlled by each function of BCM.

Control by BCM

  • Combination switch reading function

  • Rear wiper control function

  • Rear washer pump control function

Control by IPDM E/R

  • Rear wiper control function

  • Rear washer pump control function

REAR WIPER BASIC OPERATION

  • BCM detects the combination switch condition by the combination switch reading function.

  • BCM controls the rear wiper to start or stop.

REAR WIPER ON OPERATION

BCM supplies power to the rear wiper motor according to the rear wiper ON operating condition.

Rear wiper ON operating condition

  • Power switch ON

  • Rear wiper switch ON

REAR WIPER INT OPERATION

  • BCM supplies power to the rear wiper motor according to the INT operating condition.

    Rear wiper INT operating condition

    • Power switch ON

    • Rear wiper switch INT

  • BCM controls the rear wiper to operate once.

  • BCM detects the rear wiper motor stop position.

  • BCM supplies power to the rear wiper motor after an intermittent from the stop of the rear wiper motor.

REAR WIPER AUTO STOP OPERATION

  • BCM stops supplying power to the rear wiper motor when the rear wiper switch is turned OFF.

  • BCM reads a rear wiper stop position signal from the rear wiper motor to detect a rear wiper motor position.

  • When the rear wiper motor is at other than the stopping position, BCM continues to supply power to the rear wiper motor until it returns to the stop position.

REAR WIPER OPERATION LINKED WITH WASHER

  • BCM supplies power to the rear wiper motor according to the washer linked operating condition of rear wiper. When the rear washer switch is turned OFF, BCM controls rear wiper to operate approximately 3 times.

    Washer linked operating condition of rear wiper

    • Power switch ON

    • Rear washer switch ON

  • BCM transmits the rear washer pump request signal to IPDM E/R via CAN communication depending condition.

  • IPDM E/R turns ON/OFF the rear washer pump relay according to the rear washer pump request signal. IPDM E/R provides the power supply to operate the washer pump.

REAR WIPER OPERATION LINKED WITH REVERSE

  • BCM controls rear wiper to INT operating according to the conditions of rear wiper operation linked with reverse.

    Condition of rear wiper operation linked with reverse

    • Power switch ON

    • Front wiper switch: LO, HI, INT or AUTO

    • Rear wiper switch OFF

    • Selector lever “R”

  • When selector lever is selected to “R”, VCM transmits reverse switch signal to BCM via CAN communication, and then operates rear wiper motor.

Circuit Diagram

Information Display (combination Meter) Nissan Ariya 1st generation

Washer Fluid Warning

DESIGN/PURPOSE

Washer fluid warning reminds driver the washer fluid is insufficient.

SymbolMessage
Low Washer Fluid

SYNCHRONIZATION WITH MASTER WARNING LAMP

Not applicable

SYSTEM DIAGRAM

SIGNAL PATH

  • When washer fluid level is low, washer level switch turns ON and transmits washer level switch signal to combination meter.

  • Combination meter display washer fluid warning according to washer level switch signal.

When all of the conditions listed below are satisfied:

  • Ignition switch is ON.

  • Washer fluid is insufficient. (Washer level switch is ON and 3 minutes are passed)

When any of the condition listed below is satisfied:

  • Ignition switch is OFF.

  • After refill the washer fluid. (Washer level switch is OFF and 30 seconds are passed)

TIMING CHART

Warning/indicator/chime List Nissan Ariya 2026

Warning/Indicator (Information Display)

ItemReference

Washer fluid warning

(Only applied in Canada)
Refer to Washer Fluid Warning.