Rear Door
Exploded View

| Rear door panel | Grommet | Rear door striker | |||
| TORX bolt | Rear door check link | Rear door hinge (lower) | |||
| Rear door hinge cap | Rear door hinge (upper) | Rear door weather-strip | |||
| Rear door parting seal rear | Rear door parting seal lower | Rear door parting seal front | |||
Double-sided tape [t: 1.2 mm (0.047 in)] |
Double-sided tape [t: 0.8 mm (0.031 in)] |
||||
| : Clip | |||||
| : Always replace after every disassembly. | |||||
| : N·m (kg-m, in-lb) | |||||
| : N·m (kg-m, ft-lb) | |||||
| : Body grease | |||||
- Rear Door Assembly
- Rear Door Striker
- Rear Door Hinge
- Rear Door Check Link
- Rear Door Weather-Strip
- Rear Door Parting Seal
Rear Door Assembly Nissan Ariya: FE0
Removal & Installation
REMOVAL
Remove rear door harness grommet from vehicle body, and then pull out rear door harness and disconnect rear door harness connector.
Remove rear door check link mounting bolt of Nissan Ariya vehicle body side.
Support rear door assembly with a proper material to prevent it from falling.
Remove rear door hinge cap.
Remove rear door hinge (upper)
mounting nut
and rear door hinge (lower)
mounting nut
.

Remove rear door assembly.
Remove rear door hinge mounting nuts, and then remove rear door hinge from rear door panel (if necessary).
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Inspection
Open and close door. Check that rear door hinge and rear door check link rotation portion moves smoothly.
Check rear door check link rotating part for poor lubrication. Apply body grease if necessary.

| : Body grease |
Adjustment
FITTING ADJUSTMENT
Fitting Adjustment Standard Dimension

| Front door panel | Rear door panel | Body side outer | |||
| Rear door sash molding | Rear door hinge (upper) | Rear door hinge (lower) | |||
| Rear door striker | TORX bolt | ||||
| : Always replace after every disassembly. | |||||
| : N·m (kg-m, ft-lb) | |||||
Unit: mm [in]
| Portion | Standard | |||
|---|---|---|---|---|
| Rear door panel – Front door panel | G | Clearance | 2.8 – 4.8 [0.110 – 0.189] |
|
| H | Surface height | (−0.5) – (+1.0) [(−0.020) – (+0.039)] |
||
| Rear door panel – Body side outer | I | Clearance | 2.8 – 4.8 [0.110 – 0.189] |
|
| J | Surface height | (−0.5) – (+1.0) [(−0.020) – (+0.039)] |
||
| Rear door sash molding – Body side outer | K | Clearance | 4.5 – 7.5 [0.177 – 0.295] |
|
| L | Surface height | 0.2 – 3.2 [0.008 – 0.126] |
||
Check the clearance and surface height between rear door and each part by visually and touching.
If the clearance and the surface height are out of specification, adjust them according to the procedures shown below.
Fitting Adjustment Procedure
Loosen rear door hinge mounting nuts.
Adjust the surface height of rear door according to the fitting adjustment standard dimension by moving rear door panel.
Tighten rear door hinge mounting nuts.
Loosen rear door hinge mounting bolts.
Adjust the clearance of rear door according to the fitting adjustment standard dimension by moving rear door panel.
Tighten rear door hinge mounting bolts to the specified torque.
DOOR STRIKER ADJUSTMENT
Adjust door striker so that it becomes parallel with door lock insertion direction.
Rear Door Striker Nissan Ariya SUV
Removal & Installation
REMOVAL
Remove TORX bolt, and then remove rear door striker.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Rear Door Hinge Nissan Ariya 2023
Removal & Installation
REMOVAL
Remove rear door assembly. Refer to Removal & Installation.
Remove rear door hinge mounting bolts, and then remove rear door hinge from Nissan Ariya vehicle body.
Remove rear door hinge mounting nuts, and then remove rear door hinge from rear door panel.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Rear Door Check Link Nissan Ariya: FE0
Removal & Installation
REMOVAL
Fully close rear door glass.
Remove rear door finisher. Refer to Removal & Installation.
Remove rear door sealing screen. Refer to Removal & Installation.
Remove rear door check link mounting bolt of Nissan Ariya vehicle body side.
Remove rear door check link mounting bolts of rear door panel, and then take rear door check link out from the hole of rear door panel.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Rear Door Weather-Strip Nissan Ariya 1st generation
Removal & Installation
REMOVAL
Apply protective tape (A) to rear door panel
around rear door weather-strip
fixing clips for preventing damage.

Disengage fixing clips on the reverse side of rear door weather-strip using a remover tool (A).

| : Clip |
Remove rear door check link mounting bolt of Nissan Ariya vehicle body side.
Remove rear door weather-strip from rear door panel.
INSTALLATION
Install in the reverse order of removal.
Rear Door Parting Seal Nissan Ariya first Gen
Removal & Installation
REMOVAL
Rear door parting seal front
Fully open front door.
Peel off double sided tapes, and then remove rear door parting seal front.
Rear door parting seal lower
Fully open rear door.
Remove rear door parting seal lower fixing clips
, and then remove rear door parting seal lower.

Rear door parting seal rear
Fully open rear door.
Pull the rear door parting seal rear toward outside of vehicle and remove it.
INSTALLATION
Note the following item, and then install in the reverse order of removal.