Removal and Installation
In this manual: Removal and Installation
~2min read
- Bcm
- Combination Switch
Bcm Nissan Ariya SUV
Removal and Installation
REMOVAL
Disconnect the battery cable from the negative terminal. Refer to Precautions for Removing Battery Terminal.
Remove the glove box assembly. Refer to Removal & Installation.
Remove the BCM mounting nut
, then pull out the BCM
.

Disconnect the harness connectors from the BCM and remove.
INSTALLATION
Install in the reverse order of removal.
Combination Switch Nissan Ariya: FE0
Removal and Installation
REMOVAL
Remove steering angle sensor. Refer to STEERING ANGLE SENSOR : Removal & Installation.
Disconnect harness connector from combination switch.
Remove the combination switch
mounting screw
.

Pull out the combination switch
by moving it alternately on the right and left side.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?