System

In this manual: System
How to Use This Manual — 1Precautions — 1Preparation — 1Vehicle Information — 1Basic Inspection — 1Preparation. Commercial Service Tools Or/and Repair Part — 1Description — 1Component Parts — 1System — 1Diagnosis System (vcm) — 1Ecu Diagnosis Information. Vcm — 1Ev Control System — 1Ev/hev (vcm) — 1Component Parts /circuit Diagnosis — 1Ev Control System — 1Periodic Maintenance. Ev System Warning Lamp — 1Removal and Installation. Vcm — 1Traction Motor System :: Front Traction Motor — 1Preparation — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Traction Motor System :: Rear Traction Motor — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Ev Battery System :: 66kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 2Service Data — 1Ev Battery System :: 91kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 1Service Data — 2Preparation. Vehicle Charging System — 1Vehicle Charging System :: Description — 1Component Parts — 2System — 1Diagnosis System (on-Board Charger) — 1Diagnosis System (dc/dc Converter) — 1Ecu Diagnosis Information — 1Vehicle Charging System — 1Charger/pd Module (on-Board Charger) — 1Cplc (cplc) — 1Dcdc (dc/dc Converter) — 1Component Parts/circuit Diagnosis — 1Symptom Diagnosis — 1Evse Inspection — 1Periodic Maintenance — 1Removal and Installation — 1Disassembly and Assembly — 1Preparation. High Voltage Cooling System — 1Description — 1Symptom Diagnosis. Overheating Cause Analysis — 1Periodic Maintenance — 1Coolant — 1Removal and Installation — 1Radiator — 1Service Data — 1Removal and Installation. Accelerator Control System — 1Reduction Gear: Re1f62a — 1Removal and Installation — 1Transaxle & Transmission :: Electric Shift — 1Description — 3Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Rear Final Drive: Rn1r62a — 1Removal and Installation — 1Preparation. Front Axle System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data. Front Drive Shaft — 12wd — 14wd — 1Periodic Maintenance — 1Removal and Installation — 1Preparation. Front Suspension System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Road Wheels & Tires System — 1Description — 1System — 1Ecu Diagnosis Information. Bcm (body Control Module) — 1Tpms — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Road Wheels & Tires — 1Removal and Installation — 1Service Data — 1Preparation. Brake System — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Electrically-Driven Intelligent Brake Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Parking Brake System — 1System Description — 1Component Parts — 1System — 1Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit) — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Brake Control System :: With Vdc — 1System Description — 3Basic Inspection — 2Dtc/circuit Diagnosis — 1Symptom Diagnosis — 2Removal and Installation — 1Brake Control System :: Automatic Brake Hold — 1System Description — 3Component Parts /circuit Diagnosis — 1Removal and Installation — 1Brake Control System :: E-Step — 1System Description — 3Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Symptom Diagnosis — 1Rear Automatic Braking — 1System Description — 1Basic Inspection — 1Preparation. Steering System — 1System Description — 1Component Parts — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Steering Wheel — 1Removal and Installation — 1Service Data — 1System Description — 1Component Parts — 1Steering Control System — 1Ecu Diagnosis Information. Power Steering Control Module — 1Dtc/circuit Diagnosis — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation. Power Steering Control Module — 1System Description — 1Removal and Installation — 1System Description — 1System — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Component Parts — 1Basic Inspection — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information. Air Bag Diagnosis Sensor Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1System Description. Description. Ventilation System — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1Basic Inspection — 1Symptom Diagnosis — 1Removal and Installation — 1Electric Compressor — 1Cooler Pipe and Hose — 1A/c Unit Assembly Cover — 1A/c Unit Assembly — 1Heater & Air Conditioning Control System :: Automatic Air Conditioning — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 2Dtc Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 2Preparation. Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Preparation. Instrument Panel — 1Component Parts — 1System — 1Ecu Diagnosis Information. Flexible Center Storage Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information. Driver Lumbar Support Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Manual Function Does Not Operate — 1Memory Function Does Not Operate — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1System (intelligent Key System) — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1U2141-87 Can Comm Circuit — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Automatic Back Door Operation Does Not Operate — 1Back Door Does Not Open — 1Door Does Not Lock/unlock with Door Lock and Unlock Switch — 1Removal and Installation — 1Hood — 1Radiator Core Support — 1Charge Port Lid — 1Front Fender — 1Front Door — 1Rear Door — 1Back Door — 1Hood Lock — 1Front Door Lock — 1Rear Door Lock — 1Back Door Lock — 1Outside Key Antenna — 1System Description — 1System — 1Ecu Diagnosis Information. Inverter (front), Inverter (rear), Bcm, Intelligent Key Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Front Passenger Side Power Window Does Not Operate — 1Rear Lh Side Power Window Does Not Operate — 1Rear Rh Side Power Window Does Not Operate — 1Removal and Installation. Power Window Main Switch — 1Preparation. Preparation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Sunroof Switch Assembly — 1Symptom Diagnosis — 1Auto Operation Does Not Operate — 1Removal and Installation — 1Preparation — 1Description — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Service Information — 6Repair Information — 1Precaution — 1Preparation — 1Removal and Installation — 1Service Data — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information — 1Wiring Diagram. Door Mirror — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Removal and Installation — 1Exterior Lighting System :: Led Headlamp — 1System Description — 3Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1System Description — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm, Intelligent Key Unit — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis. Interior Lighting System Symptom — 1Removal and Installation — 1Service Data. Bulb Specifications — 1System Description — 1System — 1Ecu Diagnosis Information. Bcm, Ipdm E/r — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Removal and Installation. Horn — 1Preparation. Commercial Service Tools Or/and Repair Part — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Approaching Vehicle Sound for Pedestrians (vsp) Control Unit — 1Approaching Vehicle Sound for Pedestrians (vsp) — 1Vsp [approaching Vehicle Sound for Pedestrians (vsp) Control Unit] — 1Approaching Vehicle Sound for Pedestrians (vsp) System — 1Removal and Installation — 1Removal and Installation — 1Wireless Charger — 1System Description — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Removal and Installation — 1Component Parts — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Can Fundamental — 1Description — 1Trouble Diagnosis — 1Can (controller Area Network) — 1Description — 1
~15min read
  • Power Seat System for Passenger Side
  • 4 Way Lumbar Support System
  • Front Heated Seat System
  • Rear Heated Seat System
  • Front Heater and Ventilation Seat System

Power Seat System for Passenger Side Nissan Ariya 2026

System Description

Power seat can be operated regardless of the power switch position, because power supply is always supplied to power seat switch.

SLIDING OPERATION

While operating the sliding switch located in power seat switch, sliding motor operates and makes possible the seat front and back position adjustment.

RECLINING OPERATION

While operating the reclining switch located in power seat switch, reclining motor operates and makes possible the seatback forward and backward position adjustment.

LIFTING OPERATION

While operating the lifting switch located in power seat switch, lifting motor operates and makes possible the seat up and down position adjustment.

THIGH SUPPORT OPERATION

While operating the thigh support switch located in power seat switch, thigh support motor operates and makes possible the seat cushion (front side) up and down position adjustment.

4 Way Lumbar Support System Nissan Ariya first Gen

System Description

SYSTEM DIAGRAM

ComponentFunction
Lumbar support switch Refer to Lumbar Support Switch.
Driver seat control unit When the memory function of automatic drive positioner is operated, the driver seat control unit uses LIN communication to request register and recall of the seatback support position to the driver lumbar support control module.
Driver lumbar support control module Refer to Driver Lumbar Support Control Module.
Lumbar support pump Refer to Lumbar Support Pump.
Air bag These are components inside the lumbar support unit that expand by means of air allocated from the driver lumbar support control module and adjust the position of the seatback support in the front/rear and up/down directions.

DESCRIPTION

  • Lumbar support can operate regardless of the power switch position, because power supply is always supplied to lumbar support switch.

  • While operating the lumbar support switch, lumbar support pump operates which allows forward and backward operation of seatback support.

  • Memory function is provided which can register and recall the seatback support position based on operation of the seat memory switch. Refer to System Description.

OPERATION DESCRIPTION

  • When the lumbar support switch is operated, the switch operation status is input into the driver lumbar support control module.

  • Driver lumbar support control module operates the lumbar support pump according to the lumbar support switch signal, and controls the allocation of air to the air bags in order to adjust the seatback support in the front/rear and up/down directions.

Circuit Diagram

Front Heated Seat System Nissan Ariya first Gen

System Description

SYSTEM DIAGRAM

ComponentFunction
Display unit
  • Operation of the front heated seat system can be set by operating the front heated seat switch on the display.

  • Indicator of the front heated seat switch on the display turns ON according to the operation status of the front heated seat system.

    • High:3 indicator turns ON

    • Mid:2 indicator turns ON

    • Low:1 indicator turns ON

    • OFF:All indicator turns OFF

AV control unit
  • AV control unit receives the front heated seat switch operation signal from the display unit via AV communication, and the front heated seat switch operation signal is transmit to the A/C auto amp. via CAN communication.

  • AV control unit receives the front heated seat switch indicator signal from the A/C auto amp. via CAN communication, and the front heated seat switch indicator signal is transmit to the display unit via AV communication.

A/C auto amp.
  • A/C auto amp. transmits the front heated seat control signal to the front seat heater via LIN communication according to the operation of the front heated seat switch.

  • A/C auto amp. transmits the front heated seat switch indicator signal to the AV control unit via CAN communication according to the operation status of the front heated seat system.

Front seat heater Front seat cushion heater Refer to Seat Heater.
Front seatback heater

DESCRIPTION

  • Front heated seat system operates during power switch ON and warms the front seats.

  • Front heated seat system is operated by the front heated seat switch on the display.

  • Front heated seat system is driver seat and passenger seat operate independently.

  • Temperature setting of front heated seat system can be adjusted at 3 levels (Low, Mid, High).

  • Operation status of the front heated seat system can be checked from the indicator of the front heated seat switch on the display.

OPERATION DESCRIPTION

  • When the power switch is ON and the front heated seat switch on the display is operated, the display unit transmits the front heated seat switch operation signal to the AV control unit via AV communication.

  • AV control unit transmits the front heated seat switch operation signal to the A/C auto amp. via CAN communication.

  • When the A/C auto amp. receives the front heated seat switch operation signal, it transmits the front heated seat control signal to the front seat heater via LIN communication to operates the front heated seat system.

  • At the same time when the front heated seat system is operated, the A/C auto amp. transmits the front heated seat switch indicator signal to the AV control unit via CAN communication.

  • AV control unit transmits the front heated seat switch indicator signal to the display unit via AV communication.

  • When the display unit receives the front heated seat switch indicator signal, it turns ON the indicator for the front heated seat switch on the display.

HEATER CONTROL

  • Front seat cushion heater is integrated with the heat sensor that detect the seat temperature. Heat sensor transmit the seat temperature as the heat sensor signal to CPU integrated with the front seat cushion heater.

  • CPU recognizes the seat temperature from heat sensor signal. It adjusts the seat temperature by stopping operation when the seat temperature reaches the operation stop temperature , and starting operation when the seat temperature reaches the operation start temperature .

    Preset temperatureTemperature °C (°F)
    Temperature at operation stopTemperature at operation start
    Low 38 (100.4) 36 (96.8)
    Mid 40 (104.0) 38 (100.4)
    High 42 (107.6) 40 (104.0)

Circuit Diagram

Rear Heated Seat System Nissan Ariya SUV

System Description

SYSTEM DIAGRAM

ComponentFunction
Display unit
  • Operation of the rear heated seat system can be set by operating the rear heated seat switch on the display.

  • Indicator of the rear heated seat switch on the display turns ON according to the operation status of the rear heated seat system.

AV control unit
  • AV control unit receives the rear heated seat switch operation signal from the display unit via AV communication, and the rear heated seat switch operation signal is transmit to the A/C auto amp. via CAN communication.

  • AV control unit receives the rear heated seat switch indicator signal from the A/C auto amp. via CAN communication, and the rear heated seat switch indicator signal is transmit to the display unit via AV communication.

A/C control
  • A/C control detects the operation of the rear heated seat switch and transmits the rear heated seat switch operation signal to the A/C auto amp. via LIN communication.

  • A/C control receives the rear heated seat switch indicator signal from the A/C auto amp. via LIN communication, and turns ON the indicator of the rear heated seat switch.

Rear heated seat switch
  • Operation of the rear heated seat system can be set by operating the rear heated seat switch.

  • Indicator of the rear heated seat switch turns ON according to the operation status of the rear heated seat system.

    • High:3 indicator turns ON

    • Mid:2 indicator turns ON

    • Low:1 indicator turns ON

    • OFF:All indicator turns OFF

A/C auto amp.
  • A/C auto amp. transmits the rear heated seat control signal to the rear seat heater via LIN communication according to the operation of the rear heated seat switch.

  • A/C auto amp. transmits the rear heated seat switch indicator signal to the AV control unit via CAN communication and A/C control via LIN communication, according to the operation status of the rear heated seat system.

Rear seat heater Rear seat cushion heater Refer to Seat Heater.
Rear seatback heater

DESCRIPTION

  • Rear heated seat system operates during READY and warms the rear seats.

  • Rear heated seat system is operated by the rear heated seat switch on the display, or by the rear heated seat switch that is installed on the center console finisher rear upper.

  • Rear heated seat system is rear seat LH and rear seat RH operate independently.

  • Temperature setting of rear heated seat system can be adjusted at 3 levels (Low, Mid, High).

  • Operation status of the rear heated seat system can be checked from the indicator of the rear heated seat switch on the display, and the indicator of the rear heated seat switch that is installed on the center console finisher rear upper.

OPERATION DESCRIPTION

Operation of the rear heated seat switch on the display.

  • When the READY status and the rear heated seat switch on the display is operated, the display unit transmits the rear heated seat switch operation signal to the AV control unit via AV communication.

  • AV control unit transmits the rear heated seat switch operation signal to the A/C auto amp. via CAN communication.

  • When the A/C auto amp. receives the rear heated seat switch operation signal, it transmits the rear heated seat control signal to the rear seat heater via LIN communication to operates the rear heated seat system.

  • At the same time when the rear heated seat system is operated, the A/C auto amp. transmits the rear heated seat switch indicator signal to the AV control unit via CAN communication.

  • AV control unit transmits the rear heated seat switch indicator signal to the display unit via AV communication.

  • When the display unit receives the rear heated seat switch indicator signal, it turns ON the indicator for the rear heated seat switch on the display.

Operation of the rear heated seat switch that is installed on the center console finisher rear upper.

  • When the READY status, and the rear heated seat switch that is installed on the center console finisher rear upper is operated, the A/C control transmits the rear heated seat switch operation signal to the AV auto amp. via LIN communication.

  • When the A/C auto amp. receives the rear heated seat switch operation signal, it transmits the rear heated seat control signal to the rear seat heater via LIN communication to operates the rear heated seat system.

  • At the same time when the rear heated seat system is operated, the A/C auto amp. transmits the rear heated seat switch indicator signal to the A/C control via LIN communication.

  • When the A/C control receives the rear heated seat switch indicator signal, it turns ON the indicator for the rear heated seat switch.

HEATER CONTROL

  • Rear seat cushion heater is integrated with the heat sensor that detect the seat temperature. Heat sensor transmit the seat temperature as the heat sensor signal to CPU integrated with the rear seat cushion heater.

  • CPU recognizes the seat temperature from heat sensor signal. It adjusts the seat temperature by stopping operation when the seat temperature reaches the operation stop temperature , and starting operation when the seat temperature reaches the operation start temperature .

    Preset temperatureTemperature °C (°F)
    Temperature at operation stopTemperature at operation start
    Low 38 (100.4) 36 (96.8)
    Mid 40 (104.0) 38 (100.4)
    High 42 (107.6) 40 (104.0)

Circuit Diagram

Front Heater and Ventilation Seat System Nissan Ariya 2023

System Description

SYSTEM DIAGRAM

ComponentFunction
Display unit
  • Operation of the front heater and ventilation seat system can be set by operating the front heated seat switch / front ventilation seat switch on the display.

  • Indicator of the front heated seat switch / front ventilation seat switch on the display turns ON according to the operation status of the front heater and ventilation seat system. (Illuminates orange when the heater is operate. Illuminates blue when ventilation is operate.)

    • High:3 indicator turns ON

    • Mid:2 indicator turns ON

    • Low:1 indicator turns ON

    • OFF:All indicator turns OFF

AV control unit
  • AV control unit receives the front heated seat switch operation signal / front ventilation seat switch operation signal from the display unit via AV communication, and the front heated seat switch operation signal / front ventilation seat switch operation signal is transmit to the A/C auto amp. via CAN communication.

  • AV control unit receives the front heated seat switch indicator signal / front ventilation seat switch indicator sinal from the A/C auto amp. via CAN communication, and the front heated seat switch indicator signal / front ventilation seat switch indicator sinal is transmit to the display unit via AV communication.

A/C auto amp.
  • A/C auto amp. transmits the front heated seat control signal / front ventilation seat control signal to the front seat heater via LIN communication according to the operation of the front heated seat switch / front ventilation seat switch.

  • A/C auto amp. transmits the front heated seat switch indicator signal / front ventilation seat switch indicator signal to the AV control unit via CAN communication according to the operation status of the front heater and ventilation seat system.

Front seat heater Front seat cushion heater Refer to Seat Heater.
Front seatback heater
Seat cushion blower motor Refer to Seat Blower Motor.
Seatback blower motor

DESCRIPTION

  • Front heater and ventilation seat system operates during power switch ON.

  • Front heater and ventilation seat system has 2 functions: Heater function that warms the front seat and ventilation function that sucks air from the seat surface to lower the temperature of the front seat surface (prevents stuffiness)

  • Front heater and ventilation seat system is operated by the front heated seat switch / front ventilation seat switch on the display.

  • Front heater and ventilation seat system is driver seat and passenger seat operate independently.

  • Temperature setting of front heater and ventilation seat system can be adjusted at 3 levels (Low, Mid, High).

  • Air flow setting of front heater and ventilation seat system can be adjusted at 3 levels (Low, Mid, High).

  • Operation status of the front heater and ventilation seat system can be checked from the indicator of the front heated seat switch / front ventilation seat switch on the display.

OPERATION DESCRIPTION

  • When the power switch is ON and the front heated seat switch / front ventilation seat switch on the display is operated, the display unit transmits the front heated seat switch operation signal / front ventilation seat switch operation signal to the AV control unit via AV communication.

  • AV control unit transmits the front heated seat switch operation signal / front ventilation seat switch operation signal to the A/C auto amp. via CAN communication.

  • When the A/C auto amp. receives the front heated seat switch operation signal / front ventilation seat switch operation signal, it transmits the front heated seat control signal / front ventilation seat control signal to the front seat heater via LIN communication to operates the front heater and ventilation seat system.

  • At the same time when the front heater and ventilation seat system is operated, the A/C auto amp. transmits the front heated seat switch indicator signal / front ventilation seat switch indicator signal to the AV control unit via CAN communication.

  • AV control unit transmits the front heated seat switch indicator signal / front ventilation seat switch indicator signal to the display unit via AV communication.

  • When the display unit receives the front heated seat switch indicator signal / front ventilation seat switch indicator signal, it turns ON the indicator for the front heated seat switch / front ventilation seat switch on the display.

HEATER CONTROL

  • Front seat cushion heater is integrated with the heat sensor that detect the seat temperature. Heat sensor transmit the seat temperature as the heat sensor signal to CPU integrated with the front seat cushion heater.

  • CPU recognizes the seat temperature from heat sensor signal. It adjusts the seat temperature by stopping operation when the seat temperature reaches the operation stop temperature , and starting operation when the seat temperature reaches the operation start temperature .

    Preset temperatureTemperature °C (°F)
    Temperature at operation stopTemperature at operation start
    Low 38 (100.4) 36 (96.8)
    Mid 40 (104.0) 38 (100.4)
    High 42 (107.6) 40 (104.0)

VENTILATION CONTROL

CPU with built-in the seat cushion heater rotates the seat blower motor installed to the seat cushion and seatback, that sucks air from the seat surface to lower the temperature of the front seat surface (prevents stuffiness).

Preset air flowSeat blower motor speed control signal voltage (Approx.)
Low 7.5 V
Mid 10.0 V
High 12.5 V

Circuit Diagram