Service Data
- Wheel Alignment
- Ball Joint
- Wheelarch Height
Wheel Alignment Nissan Ariya 1st generation
WHEEL ALIGNMENT : Service Data
FOR 65 KW ENGINE
| Item | Standard | |||
|---|---|---|---|---|
| Type of Drive | 2WD | 4WD | ||
Camber Degree minute (Decimal degree) |
Minimum | –1° 25′ (–1.42°) | ||
| Nominal | –0° 35′ (–0.58°) | |||
| Maximum | 0° 15′ (0.25°) | |||
| Left and right difference*1 | 0° 35′ (0.58°) or less | |||
Caster Degree minute (Decimal degree) |
Minimum | 4° 26′ (4.43°) | 4° 31′ (4.52°) | |
| Nominal | 5° 20′ (5.33°) | 5° 25′ (5.42°) | ||
| Maximum | 6° 14′ (6.23°) | 6° 19′ (6.32°) | ||
| Left and right difference*1 | 0° 35′ (0.58°) or less | |||
Kingpin inclination Degree minute (Decimal degree) |
Minimum | 13° 20′ (13.33°) | ||
| Nominal | 14° 05′ (14.08°) | |||
| Maximum | 14° 50′ (14.83°) | |||
| Toe-in | Total toe-in Distance |
Minimum | Out 2.35 mm (Out 0.093 in) | Out 2.38 mm (Out 0.094 in) |
| Nominal | In 0.15 mm (In 0.006 in) | In 0.12 mm (In 0.005 in) | ||
| Maximum | In 2.65 mm (In 0.104 in) | In 2.62 mm (In 0.103 in) | ||
Total toe-angle Degree minute (Decimal degree) |
Minimum | Out 0° 12′ (Out 0.20°) | ||
| Nominal | In 0° 00′ (In 0.00°) | |||
| Maximum | In 0° 12′ (In 0.20°) | |||
Measure value under unladen*2 conditions.
*1: A difference when assuming the left side a standard.
*2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
FOR 94 KW ENGINE
| Item | Standard | |||
|---|---|---|---|---|
| Type of Drive | 2WD | 4WD | ||
Camber Degree minute (Decimal degree) |
Minimum | –1° 25′ (–1.42°) | ||
| Nominal | –0° 35′ (–0.58°) | |||
| Maximum | 0° 15′ (0.25°) | |||
| Left and right difference*1 | 0° 35′ (0.58°) or less | |||
Caster Degree minute (Decimal degree) |
Minimum | 4° 31′ (4.52°) | 4° 36′ (4.60°) | |
| Nominal | 5° 25′ (5.42°) | 5° 30′ (5.50°) | ||
| Maximum | 6° 19′ (6.32°) | 6° 24′ (6.40°) | ||
| Left and right difference*1 | 0° 35′ (0.58°) or less | |||
Kingpin inclination Degree minute (Decimal degree) |
Minimum | 13° 25′ (13.42°) | ||
| Nominal | 14° 10′ (14.17°) | |||
| Maximum | 14° 55′ (14.92°) | |||
| Toe-in | Total toe-in Distance |
Minimum | Out 2.38 mm (Out 0.094 in) | Out 2.40 mm (Out 0.094 in) |
| Nominal | In 0.12 mm (In 0.005 in) | In 0.10 mm (In 0.004 in) | ||
| Maximum | In 2.62 mm (In 0.103 in) | In 2.60 mm (In 0.102 in) | ||
Total toe-angle Degree minute (Decimal degree) |
Minimum | Out 0° 12′ (Out 0.20°) | ||
| Nominal | In 0° 00′ (In 0.00°) | |||
| Maximum | In 0° 12′ (In 0.20°) | |||
Measure value under unladen*2 conditions.
*1: A difference when assuming the left side a standard.
*2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
Ball Joint Nissan Ariya first Gen
BALL JOINT : Service Data
| Item | Standard |
|---|---|
| Swing torque | 0.5 – 3,4 N·m |
| Measurement on spring balance | 13.5 – 91.9 N (1.4 – 9.3 kg, 3.04 – 20.6 lb) |
Wheelarch Height Nissan Ariya 2023
WHEELARCH HEIGHT : Service Data
FOR UNITED STATES
| Item | Standard | ||||
|---|---|---|---|---|---|
| Battery Type | B6 | B9 | |||
| Drive Type | 2WD | 4WD | 2WD | 4WD | |
| Tire size | 235/55R19 | 235/55R19 | 235/55R19 | 255/45R20 | |
| Front (Hf) | 792 mm (31.18 in) | 792 mm (31.18 in) | 793 mm (31.22 in) | 791 mm (31.14 in) | 792 mm (31.18 in) |
| Rear (Hr) | 794 mm (31.26 in) | 790 mm (31.10 in) | 792 mm (31.18 in) | 787 mm (30.98 in) | 788 mm (31.02 in) |
![]() |
|||||
Measure value under unladen *conditions.
*: Fuel, engine coolant and lubricant are full. Hand tools and mats are in designated positions.
FOR CANADA
| Item | Standard | ||||
|---|---|---|---|---|---|
| Battery Type | B6 | B9 | |||
| Drive Type | 2WD | 4WD | 2WD | 4WD | |
| Tire size | 235/55R19 | 235/55R19 | 235/55R19 | 255/45R20 | |
| Front (Hf) | 792 mm (31.18 in) | 792 mm (31.18 in) | 794 mm (31.26 in) | 792 mm (31.18 in) | 792 mm (31.18 in) |
| Rear (Hr) | 795 mm (31.30 in) | 791 mm (31.14 in) | 793 mm (31.22 in) | 787 mm (30.98 in) | 788 mm (31.02 in) |
![]() |
|||||
Measure value under unladen *conditions.
*: Fuel, engine coolant and lubricant are full. Hand tools and mats are in designated positions.
