Front Door Lock
Exploded View

| Front door outside handle escutcheon | Rear gasket | TORX bolt | |||
Key rod (Driver side) |
TORX bolt | Front door lock assembly | |||
| Front door inside handle escutcheon | Front door inside handle | Outside handle cable clip | |||
| Inside handle cable clip | Hole seal | TORX bolt | |||
| Front door outside handle bracket | Front door outside handle bracket stopper | Front gasket | |||
| Front door outside handle | |||||
| : Pawl | |||||
| : Always replace after every disassembly. | |||||
| : N·m (kg-m, in-lb) | |||||
- Front Door Lock
- Front Door Inside Handle
- Front Door Outside Handle
Front Door Lock Nissan Ariya 2026
Removal & Installation
REMOVAL
Remove front door finisher. Refer to Removal & Installation.
Remove front door outside handle bracket. Refer to Removal & Installation.
Disengage front door inside handle cable from inside handle cable clip.
Remove front door glass run lower sash. Refer to Removal & Installation.
Remove front door lock assembly mounting TORX bolts.
Disengage front door lock assembly fixing pawls, and then remove front door lock assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Inspection
After opening and closing the door, check that door is fixed to the vehicle body normally.
Check the lock/unlock operation of door lock.
Front Door Inside Handle Nissan Ariya: FE0
Removal & Installation
REMOVAL
Remove front door finisher. Refer to Removal & Installation.
Remove front door inside handle fixing screws.
Disengage front door inside handle fixing pawls, and then remove front door inside handle.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
Front Door Outside Handle Nissan Ariya 2026
Removal & Installation
REMOVAL
Fully close front door glass.
Remove front door finisher. Refer to Removal & Installation.
Remove front door sealing screen. Refer to Removal & Installation.
Disengage front door outside handle cable from outside handle cable clip.
Disengage front door outside handle harness connector
, and then disengage front door outside handle harness connector fixing clip
(if equipped).

| : Nissan Ariya Vehicle front |
Remove key rod
from key rod holder
according to the numerical order 1→2 indicated by arrows as shown in figure (driver side).

| : Nissan Ariya Vehicle front |
Remove door side grommet
, and then loosen TORX bolt
from grommet hole.

Remove front door outside handle escutcheon from front door panel.
Slide front door outside handle grip
toward rear of Nissan Ariya vehicle and remove it according to the numerical order 1→2 indicated by arrows as shown in figure.

Disengage front gasket
and rear gasket
fixing pawls, and then remove front gasket and rear gasket.

| : Pawl |
Remove hole seal
, and then loosen TORX bolt
from service hole.

Remove front door outside handle stopper
.

Slide front door outside handle bracket
toward rear of Nissan Ariya vehicle and remove it.

| : Nissan Ariya Vehicle front |
Disconnect front door outside handle cable from front door outside handle bracket according to the numerical order 1→3 indicated by arrows as shown in figure.

INSTALLATION
Note the following items, and then install in the reverse order of removal.