System Description

In this manual: System Description
How to Use This Manual — 1Precautions — 1Preparation — 1Vehicle Information — 1Basic Inspection — 1Preparation. Commercial Service Tools Or/and Repair Part — 1Description — 1Component Parts — 1System — 1Diagnosis System (vcm) — 1Ecu Diagnosis Information. Vcm — 1Ev Control System — 1Ev/hev (vcm) — 1Component Parts /circuit Diagnosis — 1Ev Control System — 1Periodic Maintenance. Ev System Warning Lamp — 1Removal and Installation. Vcm — 1Traction Motor System :: Front Traction Motor — 1Preparation — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Traction Motor System :: Rear Traction Motor — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Ev Battery System :: 66kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 2Service Data — 1Ev Battery System :: 91kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 1Service Data — 2Preparation. Vehicle Charging System — 1Vehicle Charging System :: Description — 1Component Parts — 2System — 1Diagnosis System (on-Board Charger) — 1Diagnosis System (dc/dc Converter) — 1Ecu Diagnosis Information — 1Vehicle Charging System — 1Charger/pd Module (on-Board Charger) — 1Cplc (cplc) — 1Dcdc (dc/dc Converter) — 1Component Parts/circuit Diagnosis — 1Symptom Diagnosis — 1Evse Inspection — 1Periodic Maintenance — 1Removal and Installation — 1Disassembly and Assembly — 1Preparation. High Voltage Cooling System — 1Description — 1Symptom Diagnosis. Overheating Cause Analysis — 1Periodic Maintenance — 1Coolant — 1Removal and Installation — 1Radiator — 1Service Data — 1Removal and Installation. Accelerator Control System — 1Reduction Gear: Re1f62a — 1Removal and Installation — 1Transaxle & Transmission :: Electric Shift — 1Description — 3Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Rear Final Drive: Rn1r62a — 1Removal and Installation — 1Preparation. Front Axle System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data. Front Drive Shaft — 12wd — 14wd — 1Periodic Maintenance — 1Removal and Installation — 1Preparation. Front Suspension System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Road Wheels & Tires System — 1Description — 1System — 1Ecu Diagnosis Information. Bcm (body Control Module) — 1Tpms — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Road Wheels & Tires — 1Removal and Installation — 1Service Data — 1Preparation. Brake System — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Electrically-Driven Intelligent Brake Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Parking Brake System — 1System Description — 1Component Parts — 1System — 1Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit) — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Brake Control System :: With Vdc — 1System Description — 3Basic Inspection — 2Dtc/circuit Diagnosis — 1Symptom Diagnosis — 2Removal and Installation — 1Brake Control System :: Automatic Brake Hold — 1System Description — 3Component Parts /circuit Diagnosis — 1Removal and Installation — 1Brake Control System :: E-Step — 1System Description — 3Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Symptom Diagnosis — 1Rear Automatic Braking — 1System Description — 1Basic Inspection — 1Preparation. Steering System — 1System Description — 1Component Parts — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Steering Wheel — 1Removal and Installation — 1Service Data — 1System Description — 1Component Parts — 1Steering Control System — 1Ecu Diagnosis Information. Power Steering Control Module — 1Dtc/circuit Diagnosis — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation. Power Steering Control Module — 1System Description — 1Removal and Installation — 1System Description — 1System — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Component Parts — 1Basic Inspection — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information. Air Bag Diagnosis Sensor Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1System Description. Description. Ventilation System — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1Basic Inspection — 1Symptom Diagnosis — 1Removal and Installation — 1Electric Compressor — 1Cooler Pipe and Hose — 1A/c Unit Assembly Cover — 1A/c Unit Assembly — 1Heater & Air Conditioning Control System :: Automatic Air Conditioning — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 2Dtc Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 2Preparation. Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Preparation. Instrument Panel — 1Component Parts — 1System — 1Ecu Diagnosis Information. Flexible Center Storage Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information. Driver Lumbar Support Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Manual Function Does Not Operate — 1Memory Function Does Not Operate — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1System (intelligent Key System) — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1U2141-87 Can Comm Circuit — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Automatic Back Door Operation Does Not Operate — 1Back Door Does Not Open — 1Door Does Not Lock/unlock with Door Lock and Unlock Switch — 1Removal and Installation — 1Hood — 1Radiator Core Support — 1Charge Port Lid — 1Front Fender — 1Front Door — 1Rear Door — 1Back Door — 1Hood Lock — 1Front Door Lock — 1Rear Door Lock — 1Back Door Lock — 1Outside Key Antenna — 1System Description — 1System — 1Ecu Diagnosis Information. Inverter (front), Inverter (rear), Bcm, Intelligent Key Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Front Passenger Side Power Window Does Not Operate — 1Rear Lh Side Power Window Does Not Operate — 1Rear Rh Side Power Window Does Not Operate — 1Removal and Installation. Power Window Main Switch — 1Preparation. Preparation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Sunroof Switch Assembly — 1Symptom Diagnosis — 1Auto Operation Does Not Operate — 1Removal and Installation — 1Preparation — 1Description — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Service Information — 6Repair Information — 1Precaution — 1Preparation — 1Removal and Installation — 1Service Data — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information — 1Wiring Diagram. Door Mirror — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Removal and Installation — 1Exterior Lighting System :: Led Headlamp — 1System Description — 3Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1System Description — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm, Intelligent Key Unit — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis. Interior Lighting System Symptom — 1Removal and Installation — 1Service Data. Bulb Specifications — 1System Description — 1System — 1Ecu Diagnosis Information. Bcm, Ipdm E/r — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Removal and Installation. Horn — 1Preparation. Commercial Service Tools Or/and Repair Part — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Approaching Vehicle Sound for Pedestrians (vsp) Control Unit — 1Approaching Vehicle Sound for Pedestrians (vsp) — 1Vsp [approaching Vehicle Sound for Pedestrians (vsp) Control Unit] — 1Approaching Vehicle Sound for Pedestrians (vsp) System — 1Removal and Installation — 1Removal and Installation — 1Wireless Charger — 1System Description — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Removal and Installation — 1Component Parts — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Can Fundamental — 1Description — 1Trouble Diagnosis — 1Can (controller Area Network) — 1Description — 1
~15min read
  • Component Parts
  • System. Cooperative Regenerative Brake Function
  • Diagnosis System (electrically-Driven Intelligent Brake Unit). Consult Function

System. Cooperative Regenerative Brake Function Nissan Ariya: FE0

System Description

  • An electrically-driven intelligent brake unit is a booster system that generates assist force by using an internal motor to operate a piston inside the master cylinder part.

  • Control module is integrated with electrically-driven intelligent brake unit.

  • When the brake pedal is depressed during driving, cooperative control of the braking force from the friction brake (regular brake) and the regenerative brake from the traction motor is used. In addition, cooperative control is performed in cooperation with electrically-driven intelligent brake unit and ABS actuator and electric unit (control unit).

  • Regenerative amount of the regenerative brake is executed by ABS actuator and electric unit (control unit), and brake pedal force control is performed by electrically-driven intelligent brake unit.

  • The system performs cooperative control of the regenerative brake and friction brake (same brake as in conventional Nissan Ariya vehicles) and enables highly efficient energy recovery.

  • The fluid pressure which is applied to each brake caliper is controlled according to the amount of traction motor regeneration.

  • The amount of brake pedal operation is detected by the stroke sensor, and sent to the control module of the electrically-driven intelligent brake unit.

  • Based on the commands from the control module of the electrically-driven intelligent brake unit, the motor inside the electrically-driven intelligent brake unit operates and presses the piston of master cylinder part.

  • Pressing the master cylinder piston, and brake fluid is sent to the ABS actuator and electric unit (control unit).

  • CONSULT can be used to diagnose the system diagnosis.

  • When there is a malfunction in the power system of the electrically-driven intelligent brake unit (no voltage is generated), voltage is temporarily supplied to the electrically-driven intelligent brake unit from the brake power supply backup unit. At the same time, the brake warning lamp and brake system warning lamp turn ON, and the warning buzzer sounds.

  • When a malfunction occurs in the electrically-driven intelligent brake unit, the VDC function performs control (boost operation). At the same time, the brake warning lamp and brake system warning lamp turn ON.

  • When a malfunction occurs in the PDM (Power Delivery Module) and 12V battery, the braking force is determined by the force pressing on the brake pedal (no boost operation). At the same time, the brake warning lamp and the brake system warning lamp turn ON.

  • When a malfunction occurs in the brake power supply backup unit, the brake system warning lamp turn ON.

  • When a malfunction occurs in the electrically-driven intelligent brake unit and in the VDC function, the braking force is determined by the force pressing on the brake pedal (no boost operation). At the same time, the brake warning lamp and brake system warning lamp turn ON.

  • When a malfunction occurs only electrically-driven intelligent brake unit, electrically-driven intelligent brake unit transmits to ABS actuator and electric unit (control unit) that electrically-driven intelligent brake unit is malfunction state.

  • When a malfunction occurs in the electrically-driven intelligent brake unit, the VDC function, and the power system, then cooperative regenerative brake control is not performed.

  • A fail-safe function is available and is activated when a system malfunction occurs. Refer to Fail-safe.

SYSTEM DIAGRAM

INPUT SIGNAL AND OUTPUT SIGNAL

Major signal transmission between each unit via communication lines is shown in the following table.

ComponentFunction
Electrically-driven intelligent brake unit Refer to Component Description.
Warning buzzer Refer to Component Description.
Brake power supply backup unit Refer to Component Description.
Steering angle sensor

Mainly transmits the following signal to electrically-driven intelligent brake unit via CAN communication.

  • Steering angle sensor signal

Combination meter

Mainly receives the following signals from ABS actuator electric unit (control unit) via electrically-driven intelligent brake unit via CAN communication.

  • Brake warning lamp signal

  • Brake system warning lamp signal

ABS actuator and electric unit (control unit)

Mainly transmits the following signals to electrically-driven intelligent brake unit via CAN communication.

  • ABS actuator and electric unit (control unit) control signal

  • Nissan Ariya Vehicle speed signal

  • Front LH wheel speed signal

  • Rear LH wheel speed signal

  • Front RH wheel speed signal

  • Rear RH wheel speed signal

  • Yaw rate signal

  • Side G sensor signal

  • VDC malfunction signal

  • VDC OFF signal

  • Brake fluid pressure signal

Mainly receives the following signals from electrically-driven intelligent brake unit via CAN communication.

  • Electrically-driven intelligent brake control signal

  • Brake assist request signal

  • Brake power supply backup unit operation signal

  • Brake power supply backup unit operation request signal

  • Brake warning lamp request signal

  • Brake system warning lamp request signal

  • Brake pedaling force signal

VCM

Mainly transmits the following signals to electrically-driven intelligent brake unit and ABS actuator and electric unit (control unit) via CAN communication.

  • VCM control signal

  • Current regenerative torque signal

  • VCM status signal

  • Shift position signal

Mainly receives the following signal from electrically-driven intelligent brake unit and ABS actuator and electric unit (control unit) via CAN communication.

  • Target braking force signal

  • Regenerative braking amount signal

BCM

Mainly transmits the following signals to electrically-driven intelligent brake unit via CAN communication.

  • Sleep wake up signal

CONDITION FOR OPERATION OF THE WARNING LAMP AND THE WARNING BUZZER

Turns ON when power switch turns ON and turns OFF when the system is normal, for bulb check.

Condition (status)Brake warning lamp (red)Brake system warning lamp (yellow)Warning buzzer
Power switch OFF OFF OFF OFF
For several seconds after the power switch is ON ON ON OFF
Several seconds after power switch ON (when the system is in normal operation) OFF OFF OFF
When the power supply to the electrically-driven intelligent brake unit is changed from the 12V battery to the brake power supply backup unit ON ON ON
Brake power supply backup unit is malfunctioning OFF ON OFF
Electrically-driven intelligent brake unit is malfunctioning ON ON OFF
When brake fluid is less than the specified level (brake fluid level switch ON) ON OFF OFF

Circuit Diagram

Fail-safe

  • When there is a malfunction in the power system of the electrically-driven intelligent brake unit (no voltage is generated), voltage is temporarily supplied to the electrically-driven intelligent brake unit from the brake power supply backup unit. At the same time, the brake warning lamp and brake system warning lamp turn ON and the buzzer sounds.

  • When a malfunction occurs in the electrically-driven intelligent brake unit, the VDC function performs control (boost operation).

  • When a malfunction occurs in the PDM (Power Delivery Module) and 12V battery, the braking force is determined by the force pressing on the brake pedal (no boost operation). At the same time, brake warning lamp and the brake system warning lamp turn ON.

  • When a malfunction occurs in the brake power supply backup unit, the brake system warning lamp turn ON.

  • When a malfunction occurs in the electrically-driven intelligent brake unit and in the VDC function, the braking force is determined by the force pressing on the brake pedal (no boost operation). At the same time, the brake warning lamp and brake system warning lamp turn ON.

  • When a malfunction occurs in the electrically-driven intelligent brake unit, VDC function, and power system, cooperative regenerative brake control is not performed.

DTCFail-safe condition
B14E0-02

The following functions are suspended.

  • Cooperative regenerative brake function

  • e-Step function

B14E0-09
B14E0-11
B14E0-12
B14E0-13
B14E0-1C
B14E0-38
B14E0-4A
B14E0-64
B14E1-02
B14E1-09
B14E1-11
B14E1-12
B14E1-13
B14E1-1C
B14E1-38
B14E1-4A
B14E1-64
B14E2-02
B14E2-09
B14E2-11
B14E2-12
B14E2-13
B14E2-1C
B14E2-38
B14E2-4A
B14E2-64
B14E3-02
B14E3-09
B14E3-11
B14E3-12
B14E3-13
B14E3-1C
B14E3-38
B14E3-4A
B14E3-64
B14E4-64
B14E5-64 Normal control
B14E5-92
B14E6-85
B14E6-92
C18D0-01

The following functions are suspended.

  • Power supply from the brake power supply backup unit

C18D1-09
C18D2-12
C18D3-14
C18D4-14
C18D5-09
C18D6-09
C18D7-09
C18D8-09
C18D9-09
C18DA-09
C18DB-09
C18DC-09
C18DD-09
C18DE-82
C18DE-83
C18DE-87
C18E1-04 Normal control
C18E1-07

The following functions are suspended.

  • Cooperative regenerative brake function

  • e-Step function

  • Boost function [Boost function by the ABS actuator and electric unit (control unit) is activated]

C18E1-18
C18E1-19
C18E1-49
C18E1-4B
C18E3-86
C18E4-88
C18E5-88
C18E6-49
C18E7-13 Normal control
C18E7-16

The following functions are suspended.

  • Cooperative regenerative brake function

  • e-Step function

C18E7-17
C18E7-1C
C18E9-01
C18E9-04
C18E9-44
C18E9-45
C18E9-46
C18E9-47
C18E9-48
C18E9-49
C18E9-96
C18EA-01
C18EB-01
C18EC-01

The following functions are suspended.

  • Cooperative regenerative brake function

  • e-Step function

  • Boost function [Boost function by the ABS actuator and electric unit (control unit) is activated]

C18EC-04
C18EC-11
C18EC-12
C18EC-13
C18EC-14
C18EC-15
C18EC-1F
C18ED-04
C18EE-01
C18EE-04
C18EE-64
C18EE-87
C18EE-96
C18EF-16
C18EF-17
C18EF-96
C18F1-08
C18F3-04
C18F3-4B
C18F4-86 Normal control
C18F5-08
C18F6-08
C18F7-08

The following functions are suspended.

  • Cooperative regenerative brake function

  • e-Step function

C18F7-86
C18F8-08 Normal control
C18F8-86
C18F9-02
C18FA-44

The following functions are suspended.

  • Cooperative regenerative brake function

  • e-Step function

C18FA-46 Normal control
C18FC-18

The following functions are suspended.

  • Cooperative regenerative brake function

  • e-Step function

C18FC-19
C18FD-18
C18FD-19
C18FE-29
U1FA1-86 Normal control
U2140-87
U2143-87
U2148-87

The following functions are suspended.

  • Cooperative regenerative brake function

  • e-Step function

U214F-87 Normal control
U2240-87
U2243-87
U2248-87

The following functions are suspended.

  • Cooperative regenerative brake function

  • e-Step function

U224F-87 Normal control
U2252-87
U225B-87

Warning / Indicator / Chime List

FOR USA
NameDesignLayout / Function
Brake warning lamp For layout: Refer to Design.
For function: Refer to Brake Warning Lamp.
Brake system warning lamp For layout: Refer to Design.
For function: Refer to Brake System Warning Lamp.
EXCEPT FOR USA
NameDesignLayout / Function
Brake warning lamp For layout: Refer to Design.
For function: Refer to Brake Warning Lamp.
Brake system warning lamp For layout: Refer to Design.
For function: Refer to Brake System Warning Lamp.

System Description

COOPERATIVE REGENERATIVE BRAKE CONTROL

  • A regenerative brake drives the traction motor to act as an alternator, and converts the kinetic energy produced by rotation of the tires into electrical energy. The converted electrical energy charges the Li-ion battery.

  • When the brakes are operated (during driving), the electrically-driven intelligent brake unit calculates the required braking force based on the input value from the stroke sensor (indicating the amount of brake pedal operation), and it sends the result to the VCM. At the same time, it calculates the hydraulic braking force needed to produce the required braking force.

  • The VCM calculates the regenerative braking force needed to produce the required braking force, and sends the result to the electrically-driven intelligent brake unit. At the same time, the traction motor inverter uses the traction motor to perform regenerative braking.

  • The electrically-driven intelligent brake unit and ABS actuator and electric unit (control unit) calculates the hydraulic braking force again based on the regenerative braking force result from the VCM and the calculated result for hydraulic braking force.

  • Electrically-driven intelligent brake unit controls brake pedal force according to calculated amount of regenerative braking torque.

  • The fluid pressure generated by the master cylinder is sent to each brake.

  • When the cooperative regenerative brake is operating, the motor inside the electrically-driven intelligent brake unit moves the piston of master cylinder part according to the amount of regeneration.

  • Moving the piston of master cylinder part increases the fluid pressure applied to the ABS actuator and electric unit (control unit). (The brake pedal stroke does not change.)

  • When brake control is stopped (immediately before Nissan Ariya vehicle stop or while vehicle is stopped), cooperative regenerative brake control is not performed.

SYSTEM DIAGRAM

INPUT SIGNAL AND OUTPUT SIGNAL

Major signal transmission between each unit via communication lines is shown in the following table.

ComponentFunction
Electrically-driven intelligent brake unit Refer to Component Description.
Warning buzzer Refer to Component Description.
Brake power supply backup unit Refer to Component Description.
Steering angle sensor

Mainly transmits the following signal to electrically-driven intelligent brake unit via CAN communication.

  • Steering angle sensor signal

Combination meter

Mainly receives the following signals from electrically-driven intelligent brake unit via ABS actuator electric unit (control unit) via CAN communication.

  • Brake warning lamp signal

  • Brake system warning lamp signal

ABS actuator and electric unit (control unit)

Mainly transmits the following signals to electrically-driven intelligent brake unit via CAN communication.

  • ABS actuator and electric unit (control unit) control signal

  • Nissan Ariya Vehicle speed signal

  • Front LH wheel speed signal

  • Rear LH wheel speed signal

  • Front RH wheel speed signal

  • Rear RH wheel speed signal

  • Yaw rate signal

  • Side G sensor signal

  • VDC malfunction signal

  • VDC OFF signal

  • Brake fluid pressure signal

Mainly receives the following signals from electrically-driven intelligent brake unit via CAN communication.

  • Electrically-driven intelligent brake control signal

  • Brake assist request signal

  • Brake power supply backup unit operation signal

  • Brake power supply backup unit operation request signal

  • Brake warning lamp request signal

  • Brake system warning lamp request signal

VCM

Mainly transmits the following signals to electrically-driven intelligent brake unit via CAN communication.

  • VCM control signal

  • Current regenerative torque signal

  • VCM status signal

  • Shift position signal

Mainly receives the following signal from electrically-driven intelligent brake unit via CAN communication.

  • Target braking force signal

BCM

Mainly transmits the following signals to electrically-driven intelligent brake unit via CAN communication.

  • Sleep wake up signal

Diagnosis System (electrically-Driven Intelligent Brake Unit). Consult Function Nissan Ariya 1st generation

Diagnosis Description

APPLICATION ITEM

CONSULT can display each diagnostic item using the diagnostic test modes as follows.

Diagnosis modeNote
Self Diagnostic Result Display DTC which electrically-driven intelligent brake unit memorizes
Data monitor Displays electrically-driven intelligent brake unit input/output data in real time
Active test Enables an operational check of a load by transmitting a driving signal from the electrically-driven intelligent brake unit to the load
ECU Identification Displays electrically-driven intelligent brake unit part number
Replace ECU Write the Nissan Ariya vehicle specification when replacing electrically-driven intelligent brake unit

SELF DIAGNOSTIC RESULT

Refer to DTC Index.

When “CRNT” is displayed on self-diagnosis result

  • The system is presently malfunctioning.

When “PAST” is displayed on self-diagnosis result

  • System malfunction in the past is detected, but the system is presently normal.

Freeze frame data (FFD)

When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.

ItemUnitDescription
Error code — Displays but not used.
ODO/TRIP meter km Displays the total mileage (Odometer value) of the moment a particular.
DTC count — Displays the number of times DTC is detected.

DATA MONITOR

ItemUnitNote
Input rod position mm Displays the input rod position.
Output rod position mm Displays the output rod position.
Temperature 1 ℃ Display the control unit temperature of electrically-driven intelligent brake unit.
Temperature 2 ℃ Display the control unit temperature of electrically-driven intelligent brake unit.
Battery voltage V Displays the 12V battert power supply voltage value applied to electrically-driven intelligent brake unit.
Control module voltage mV Displays the power switch ON power supply voltage value applied to electrically-driven intelligent brake unit.
Stroke sensor V Displays the output voltage of stroke sensor.
Front LH wheel speed — Displays but not used.
Front RH wheel speed — Displays but not used.
Rear LH wheel speed — Displays but not used.
Rear RH wheel speed — Displays but not used.
Nissan Ariya Vehicle speed 1 — Displays but not used.
Forward / backward judgment — Displays but not used.
Backup power supply volt V Displays the power supply voltage value applied to brake power supply backup unit.
Odometer m Displays the mileage.
Wheel speed 1 kph Displays the wheel speed of drive wheel.
Wheel speed 2 kph Displys the wheel speed of passive wheel.
Brake fluid pressure Mpa Displays the brake fluid pressure.
External brake request 1 / 2 / 3 / 4 Displays the request status of except driver brake.

ACTIVE TEST

The active test is used to determine and identify details of a malfunction, based on self-diagnosis test result and data obtained in the Data monitor. In response to instructions from CONSULT, instead of those from electrically-driven intelligent brake unit on the Nissan Ariya vehicle, a drive signal is sent to the actuator to check its operation.

ItemNote
Buzzer Activate the buzzer.

ECU IDENTIFICATION

Electrically-driven intelligent brake unit part number can be read.

REPLACE ECU

Write the vehicle specification when replacing electrically-driven intelligent brake unit.