Removal and Installation
- Sunroof Unit Assembly
- Wind Deflector
- Glass Lid
- Sunshade
- Drain Assembly
- Glass Lid Guide
- Sunshade Slider
- Drain Hose
- Drain Connector
- Sunroof Motor Assembly
- Glass Lid Weather Strip
- Rear Sunroof Glass Weather Strip
Sunroof Unit Assembly Nissan Ariya SUV
Exploded View

| Glass lid weather strip | Glass lid | Side trim RH | |||
| Wind deflector | Rear sunroof bracket RH | Front sunroof bracket RH | |||
| Front drain hose RH | Front drain connector RH | Front drain connector LH | |||
| Front drain hose LH | Rear drain connector LH | Rear drain hose LH | |||
| Front sunroof bracket LH | Rear sunroof bracket LH | Side trim LH | |||
| Sunroof unit assembly | Harness connector assembly | Sunroof motor assembly | |||
| Map lamp assembly | Sunshade motor assembly | Rear drain hose RH | |||
| Rear drain connector RH | |||||
| : Clip | |||||
| : Pawl | |||||
| : Metal clip | |||||
| : N·m (kg-m, in-lb) | |||||
| : N·m (kg-m, ft-lb) | |||||
| : Always replace after every disassembly. | |||||

| Rear sunroof glass weather strip | Rear sunroof glass | Drain assembly | |||
| Glass lid guide LH | Glass lid guide RH | Sunshade slider LH | |||
| Sunshade slider RH | Sunshade | Sunshade base LH | |||
| Rollshade stay | Sunshade base RH | Sunroof frame assembly | |||
| : Pawl | |||||
| : Always replace after every disassembly. | |||||
Removal & Installation
REMOVAL
Remove headlining. Refer to Removal & Installation.
Disconnect front drain hoses
and rear drain hoses
from sunroof frame
.

| : Nissan Ariya Vehicle front |
Remove front sunroof bracket mounting bolts
, and then remove front sunroof bracket.

| : Nissan Ariya Vehicle front |
Remove curtain air bag module. Refer to Removal & Installation.
Remove rear sunroof bracket mounting bolts
, and then remove rear sunroof bracket.

| : Nissan Ariya Vehicle front |
Remove sunroof unit assembly mounting nuts
, and then remove sunroof unit assembly.

| : Nissan Ariya Vehicle front |
Remove sunroof unit assembly from back door opening.
INSTALLATION
Temporarily tighten sunroof unit assembly mounting nuts.
Tighten sunroof unit assembly mounting nuts diagonally in order.
Tighten rear sunroof bracket mounting bolt of sunroof unit assembly side, and then tighten rear sunroof bracket mounting bolt of Nissan Ariya vehicle body side.
Install curtain air bag module. Refer to Removal & Installation.
Tighten front sunroof bracket mounting bolts of sunroof unit assembly side, and then tighten front sunroof bracket mounting bolts of Nissan Ariya vehicle body side.
Connect front drain hoses and rear drain hoses.
Install headlining. Refer to Removal & Installation.
Disassembly & Assembly
DISASSEMBLY
Remove rear sunroof glass. Refer to Removal & Installation.
Remove sunshade. Refer to Removal & Installation.
Remove sunshade slider. Refer to Removal & Installation.
Remove drain assembly. Refer to Removal & Installation.
Remove glass lid guide. Refer to Removal & Installation.
ASSEMBLY
Assemble in the reverse order of disassembly.
Wind Deflector Nissan Ariya 1st generation
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Fully open glass lid.
Disengage wind deflector fixing points
using a remover tool (A) from sunroof unit assembly.

Disengage wind deflector fixing pawl using a remover tool (A), and then remove wind deflector.

| : Pawl | |
| : Nissan Ariya Vehicle front |
INSTALLATION
Install in the reverse order of removal.
Glass Lid Nissan Ariya: FE0
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Tilt glass lid up.
Disengage fixing metal clips, and then remove side trim.

| : Metal clip |
Remove glass lid fixing screws
.

Remove glass lid.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Adjustment

| Rear sunroof glass | Glass lid | Roof panel |
If the clearance and the surface height are out of specification, adjust them according to the procedures shown below.
Unit: mm [in]
| Portion | Standard | |||
|---|---|---|---|---|
| Roof panel – Rear sunroof glass | E | Clearance | 6.4 – 8.0 [0.252 – 0.315] |
|
| F | Surface height | (−2.4) – (+1.0) [(−0.094) – (+0.039)] |
||
| G | Clearance | 6.1 – 8.3 [0.240 – 0.327] |
||
| H | Surface height | (−2.4) – (+1.0) [(−0.094) – (+0.039)] |
||
| Roof panel – Glass lid | I | Clearance | 6.4 – 8.0 [0.252 – 0.315] |
|
| J | Surface height | (−2.4) – (+1.0) [(−0.094) – (+0.039)] |
||
| K | Clearance | 6.3 – 7.9 [0.248 – 0.311] |
||
| L | Surface height | (−2.4) – (+1.0) [(−0.094) – (+0.039)] |
||
Loosen glass lid fixing screws.
Adjust the clearance of glass lid and roof panel according to the fitting standard dimension.
To prevent glass lid from moving after adjustment, first tighten the fixing screw of front left, and then tighten the screw of rear right.
Tighten remaining fixing screws, being careful to prevent glass lid from moving.
Tilt glass lid up and down several times to check that it moves smoothly.
Sunshade Nissan Ariya 1st generation
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Remove rear sunroof glass. Refer to Removal & Installation.
Disengage sunshade stay
using a remover tool (A) from sunshade slider
as shown by the arrow in the figure.

| : Nissan Ariya Vehicle front |
Push sunshade stay
according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove sunshade stay from sunshade slider
.

| : Nissan Ariya Vehicle front |
Disengage sunshade base fixing pawl using a remover tool (A).

Remove sunshade base and rollshade stay, sunshade as a unit.
Disengage sunshade fixing pawl according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove sunshade from sunshade base.


Remove rollshade stay from sunshade base.
INSTALLATION
Install rollshade stay to sunshade base.
Install sunshade to sunshade base.
Install sunshade base and rollshade stay, sunshade as a unit to sunroof frame assembly.
Install sunshade stay to sunshade slider.
Drain Assembly Nissan Ariya
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Remove sunshade. Refer to Removal & Installation.
Disengage drain assembly fixing pawl, and then remove drain assembly.

| : Pawl | |
| : Nissan Ariya Vehicle front |
INSTALLATION
Install in the reverse order of removal.
Glass Lid Guide Nissan Ariya
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Remove drain assembly. Refer to Removal & Installation.
Remove glass lid guide.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Sunshade Slider Nissan Ariya 2026
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Remove sunshade. Refer to Removal & Installation.
Remove sunshade slider.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
Drain Hose Nissan Ariya SUV
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Front
Remove headlining. Refer to Removal & Installation.
Remove front drain hose from sunroof frame and front drain connector.
Rear
Remove headlining. Refer to Removal & Installation.
Disconnect rear drain hose from sunroof frame and rear drain connector.
Disengage rear drain hose from fixing clips, and then remove rear drain hose.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Align marking of drain hose and installation position of vehicle body.
(Align lower end of rear drain hose LH and black marking.)
When drain hose installation, never stuff and crush by bending.
Drain Connector Nissan Ariya
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Front
Remove instrument panel. Refer to Removal & Installation.
Remove cowl top cover. Refer to Removal & Installation.
Disengage front drain connector fixing pawls, and then remove front drain connector from front drain hose.
Rear
Remove rear bumper fascia. Refer to Removal & Installation.
Remove luggage side lower finisher. Refer to Removal & Installation.
Disengage rear drain connector fixing pawls, and then remove rear drain connector from rear drain hose.
INSTALLATION
Install in the reverse order of removal.
Sunroof Motor Assembly Nissan Ariya first Gen
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Remove headlining to make work space. Refer to Removal & Installation.
Disconnect harness connector
from sunroof motor assembly, and then remove sunroof motor assembly fixing screws
.

Remove sunroof motor assembly.
INSTALLATION
Move the sunroof motor assembly laterally a little so that the gear is completely engaged into the wire on the sunroof unit assembly and mounting surface becomes parallel. Then secure the sunroof motor assembly with screws.
Connect harness connector.
Install headlining. Refer to Removal & Installation.
Glass Lid Weather Strip Nissan Ariya: FE0
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Remove glass lid. Refer to Removal & Installation.
Pull the glass lid weather strip and remove from glass lid.
INSTALLATION

| : Nissan Ariya Vehicle upper side |
- To install the glass lid weather strip, fit the glass lid weather strip part
to the glass lid part
. 
Align the corner of the glass lid weather strip with the corner of the glass lid.

Align the corner of the glass lid weather strip with the corner of the glass lid.

Align the each centre part of glass lid weather strip with glass lid.

Push and fit the glass lid weather strip and install.

After installing the glass lid weather strip
, confirm that the glass lid
is securely installed according to the diagram.

| : Glass end part | |
| B | : 11.1 ± 0.6 mm |
Install glass lid. Refer to Removal & Installation.
Rear Sunroof Glass Weather Strip Nissan Ariya SUV
Exploded View
Refer to Exploded View.
Removal & Installation
REMOVAL
Remove rear sunroof glass. Refer to Removal & Installation.
Pull the rear sunroof glass weatherstrip and remove from rear sunroof glass.
INSTALLATION

| : Nissan Ariya Vehicle upper side |
- When installing the rear sunroof glass weather strip, fit rear sunroof glass weather strip
part to the rear sunroof glass
part. 
Fit part
of the rear sunroof glass weather strip to part
of the rear sunroof glass in the direction shown by the arrows (
).

Align the corner part of rear sunroof glass weather strip with rear sunroof glass corner part.

Fit each center part of rear sunroof glass weather strip to rear sunroof glass.

Install the rear sunroof glass weather strip by pressing it into position.

After installing rear sunroof glass weather strip
, confirm that it is securely fixed to rear sunroof glass
as in the diagram.

| : Glass edge part | |
| B | : 11.1 ± 0.6 mm |
Install rear sunroof glass. Refer to Removal & Installation.