Dtc/circuit Diagnosis
- C1601-16 Battery Power Supply
- C1604-96 Power Steering Torque Sensor
- C1615-4b Overheat
- C161a-82 Abs System
- U0076-00 Can Comm Circuit
- Eps Warning Lamp
C1601-16 Battery Power Supply Nissan Ariya 2026
DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms | DTC detection condition | |||
|---|---|---|---|---|---|
| C1601 | 16 | Battery voltage | Diagnosis condition | When power switch is ON. | |
| Signal (terminal) | Power supply voltage signal | ||||
| Threshold | 8V or less | ||||
| Diagnosis delay time | 2 seconds or more | ||||
POSSIBLE CAUSE
Harness or connector
Power steering control module
Power supply system
Fuse
Fusible link
12V battery
FAIL-SAFE
Manual steering state
Confirmation Procedure
PRECONDITIONING
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
GO TO 2.
DTC REPRODUCTION PROCEDURE
With CONSULT
Power switch ON.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is DTC “C1601-16” detected?
YES>>Proceed to diagnosis procedure. DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK POWER STEERING CONTROL MODULE POWER SUPPLY CIRCUIT
Check power steering control module power supply circuit. DTC Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair / replace harness, connector, terminal, fuse, or fusible link.
CHECK TERMINAL
Check the power steering control module terminals for damage or loose connection with harness connector.
Is the inspection result normal?
YES>>Replace the power steering control module. EPS CONTROL UNIT : Removal & Installation .
NO>>Repair/replace harness, connector or terminal.
C1604-96 Power Steering Torque Sensor Nissan Ariya 2026
DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms | DTC detection condition | |||
|---|---|---|---|---|---|
| C1604 | 96 | TORQUE SENSOR | Diagnosis condition | When power switch is ON. | |
| Signal (terminal) | Power steering torque sensor signal | ||||
| Threshold | When a malfunction is detected in power steering torque sensor. | ||||
| Diagnosis delay time | 1 second or less | ||||
POSSIBLE CAUSE
Harness or connector
Power steering torque sensor
Power steering control module
FAIL-SAFE
Manual steering state
Confirmation Procedure
PRECONDITIONING
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
GO TO 2.
DTC REPRODUCTION PROCEDURE
With CONSULT
Power switch ON.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is DTC “C1604-96” detected?
YES>>Proceed to diagnosis procedure. DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer toIntermittent Incident
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
PERFORM SELF-DIAGNOSIS
With CONSULT
Power switch OFF to ON.
Erase self-diagnostic results for “EPS/DIRECT ADAPTIVE STEERING 3”.
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
Set the Nissan Ariya vehicle to READY.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is DTC “C1604–96” detected?
YES>>Replace the power steering control module. EPS CONTROL UNIT : Removal & Installation.
NO>>INSPECTION END
C1615-4b Overheat Nissan Ariya
DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms | DTC detection condition | |||
|---|---|---|---|---|---|
| C1615 | 4B | Control unit over heat | Diagnosis condition | When power switch is ON. | |
| Signal (terminal) | — | ||||
| Threshold | When the protection function of the power steering control module operates. | ||||
| Diagnosis delay time | 2 seconds or more | ||||
POSSIBLE CAUSE
Excessive steering operation
FAIL-SAFE
Limit steering assist level state
Confirmation Procedure
PRECONDITIONING
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
GO TO 2.
DTC REPRODUCTION PROCEDURE
With CONSULT
Power switch ON.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is DTC “C1615-4B” detected?
YES>>Proceed to diagnosis procedure. DTC Diagnosis Procedure .
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK THE POWER STEERING CONTROL MODULE SIGNAL (1)
With CONSULT
Set the Nissan Ariya vehicle to READY.
Turn steering wheel from full left stop to full right stop.
Select “EPS/DIRECT ADAPTIVE STEERING 3”, “Data monitor” and “Assist level” in this order. Values On The Diagnosis Tool.
Dose the item in “Data monitor” indicate “99%”?
YES>>GO TO 2.
NO>>GO TO 3.
PERFORM SELF-DIAGNOSIS
With CONSULT
Power switch OFF to ON.
Erase self-diagnostic results for “EPS/DIRECT ADAPTIVE STEERING 3”.
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
Set the Nissan Ariya vehicle to READY.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is DTC “C1615-4B” detected?
YES>>Replace the power steering control module. Refer to EPS CONTROL UNIT : Removal & Installation.
NO>>Check terminals and connection of each harness connector for malfunctioning conditions. Repair/replace error-detected parts.
CHECK THE POWER STEERING CONTROL MODULE SIGNAL (2)
With CONSULT
Select “EPS/DIRECT ADAPTIVE STEERING 3”, “Data monitor” and “Assist level” in this order. Values On The Diagnosis Tool.
Stop the EPS system until the item becomes “99%”.
Check that the symptom continues.
Dose the symptom continue?
YES>>Replace the power steering control module. Refer to EPS CONTROL UNIT : Removal & Installation.
NO>>The assist torque decreases because of protection function. This is not malfunction. INSPECTION END
C161a-82 Abs System Nissan Ariya SUV
DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms | DTC detection condition | |||
|---|---|---|---|---|---|
| C161A | 82 | Anti-lock braking system | Diagnosis condition | When power switch is ON. | |
| Signal (terminal) | CAN communication signal | ||||
| Threshold | When a malfunction is detected in ABS actuator and electric unit (control unit). | ||||
| Diagnosis delay time | 2 seconds or more | ||||
POSSIBLE CAUSE
CAN communication line
ABS actuator and electric unit (control unit)
Power steering control module
FAIL-SAFE
Constant steering assist level state
Confirmation Procedure
PRECONDITIONING
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
GO TO 2.
DTC REPRODUCTION PROCEDURE
With CONSULT
Power switch ON.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is DTC “C161A-82” detected?
YES>>Proceed to diagnosis procedure. DTC Diagnosis Procedure .
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
PERFORM ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS
With CONSULT
Power switch OFF to ON.
Perform self-diagnosis for "ABS".
Is any DTC detected?
YES>>Check the DTC. DTC Index .
NO>>GO TO 2.
CHECK CONNECTOR AND TERMINAL
Power switch OFF.
Disconnect ABS actuator and electric unit (control unit) harness connector.
Disconnect power steering control module harness connector.
Check the connector for disconnection or looseness.
Check the terminals for damage or loose connection with harness connector.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace harness, connector, or terminal, securely lock the connector.
PERFORM SELF-DIAGNOSIS
With CONSULT
Connect ABS actuator and electric unit (control unit) harness connector.
Connect power steering control module harness connector.
Power switch OFF to ON.
Erase self-diagnostic results for “EPS/DIRECT ADAPTIVE STEERING 3”.
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
Set the Nissan Ariya vehicle to READY.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is DTC “C161A-82” detected?
YES>>Replace the power steering control module. Refer to EPS CONTROL UNIT : Removal & Installation.
NO>>INSPECTION END
U0076-00 Can Comm Circuit Nissan Ariya SUV
DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms | DTC detection condition | |||
|---|---|---|---|---|---|
| U0076 | 00 | Control module communication Bus D Off | Diagnosis condition | When power switch is ON. | |
| Signal (terminal) | CAN communication signal | ||||
| Threshold | When a malfunction is detected in CAN communication signal. | ||||
| Diagnosis delay time | 2 seconds or more | ||||
POSSIBLE CAUSE
CAN communication line
FAIL-SAFE
Constant steering assist level state
Confirmation Procedure
PRECONDITIONING
Pull the parking brake switch.
Power switch OFF.
Get out of the Nissan Ariya vehicle and close all doors.
Wait 65 seconds or more.
GO TO 2.
DTC REPRODUCTION PROCEDURE
With CONSULT
Power switch ON.
Perform self-diagnosis for “EPS/DIRECT ADAPTIVE STEERING 3”.
Is DTC “U0076-00” detected?
YES>>Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
Refer to Trouble Diagnosis Flow Chart.
Eps Warning Lamp Nissan Ariya
Component Function Check
CHECK THE ILLUMINATION OF THE EPS WARNING LAMP
Check that the EPS warning lamp turns ON when power switch is placed ON. Then, EPS warning lamp turns OFF after the Nissan Ariya vehicle is READY state.
Is the inspection result normal?
YES>>Inspection End.
NO>>Perform trouble diagnosis. Refer to .Diagnosis Procedure
Diagnosis Procedure
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Power switch OFF to ON.
Select “Self Diagnostic Result” mode of “EPS/DAST 3”.
Is any DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK EPS WARNING LAMP SIGNAL
CONSULT
Select “WARNING LAMP” in “Data Monitor” mode of “EPS/DAST 3”.
Check that the item in “Data Monitor” is “On”.
Set the Nissan Ariya vehicle to READY.
Check that the item in “Data Monitor” is “Off”.
Is the inspection result normal?
YES>>Perform the trouble diagnosis for combination meter power supply circuit. Refer to Diagnosis Procedure .
NO>>EPS control unit is malfunctioning. Replace EPS control unit. Refer to Removal and Installation.