Removal and Installation
In this manual: Removal and Installation
3steps
~18min
2/5difficulty
Done 0 of 3
- Chassis Control Module
- Automatic Brake Hold Switch
Chassis Control Module Nissan Ariya: FE0
CHASSIS CONTROL MODULE : Removal & Installation
REMOVAL
Remove the instrument panel. Refer to Work Procedure.
Disconnect chassis control module harness connector.
Remove the chassis control module.
INSTALLATION
Note the following, install in the reverse order of removal.
When replacing the chassis control module, be sure to perform the configuration of chassis control module. Refer to Work Procedure.
Automatic Brake Hold Switch Nissan Ariya: FE0
AUTOMATIC BRAKE HOLD SWITCH : Removal & Installation
REMOVAL
Remove instrument lower panel. Refer to Removal & Installation.
Remove switch bracket mounting screw
and remove automatic brake hold switch bracket
from instrument lower panel.
Remove automatic brake hold switch from switch bracket.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?