Component Parts /circuit Diagnosis

In this manual: Component Parts /circuit Diagnosis
How to Use This Manual — 1Precautions — 1Preparation — 1Vehicle Information — 1Basic Inspection — 1Preparation. Commercial Service Tools Or/and Repair Part — 1Description — 1Component Parts — 1System — 1Diagnosis System (vcm) — 1Ecu Diagnosis Information. Vcm — 1Ev Control System — 1Ev/hev (vcm) — 1Component Parts /circuit Diagnosis — 1Ev Control System — 1Periodic Maintenance. Ev System Warning Lamp — 1Removal and Installation. Vcm — 1Traction Motor System :: Front Traction Motor — 1Preparation — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Traction Motor System :: Rear Traction Motor — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Ev Battery System :: 66kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 2Service Data — 1Ev Battery System :: 91kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 1Service Data — 2Preparation. Vehicle Charging System — 1Vehicle Charging System :: Description — 1Component Parts — 2System — 1Diagnosis System (on-Board Charger) — 1Diagnosis System (dc/dc Converter) — 1Ecu Diagnosis Information — 1Vehicle Charging System — 1Charger/pd Module (on-Board Charger) — 1Cplc (cplc) — 1Dcdc (dc/dc Converter) — 1Component Parts/circuit Diagnosis — 1Symptom Diagnosis — 1Evse Inspection — 1Periodic Maintenance — 1Removal and Installation — 1Disassembly and Assembly — 1Preparation. High Voltage Cooling System — 1Description — 1Symptom Diagnosis. Overheating Cause Analysis — 1Periodic Maintenance — 1Coolant — 1Removal and Installation — 1Radiator — 1Service Data — 1Removal and Installation. Accelerator Control System — 1Reduction Gear: Re1f62a — 1Removal and Installation — 1Transaxle & Transmission :: Electric Shift — 1Description — 3Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Rear Final Drive: Rn1r62a — 1Removal and Installation — 1Preparation. Front Axle System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data. Front Drive Shaft — 12wd — 14wd — 1Periodic Maintenance — 1Removal and Installation — 1Preparation. Front Suspension System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Road Wheels & Tires System — 1Description — 1System — 1Ecu Diagnosis Information. Bcm (body Control Module) — 1Tpms — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Road Wheels & Tires — 1Removal and Installation — 1Service Data — 1Preparation. Brake System — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Electrically-Driven Intelligent Brake Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Parking Brake System — 1System Description — 1Component Parts — 1System — 1Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit) — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Brake Control System :: With Vdc — 1System Description — 3Basic Inspection — 2Dtc/circuit Diagnosis — 1Symptom Diagnosis — 2Removal and Installation — 1Brake Control System :: Automatic Brake Hold — 1System Description — 3Component Parts /circuit Diagnosis — 1Removal and Installation — 1Brake Control System :: E-Step — 1System Description — 3Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Symptom Diagnosis — 1Rear Automatic Braking — 1System Description — 1Basic Inspection — 1Preparation. Steering System — 1System Description — 1Component Parts — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Steering Wheel — 1Removal and Installation — 1Service Data — 1System Description — 1Component Parts — 1Steering Control System — 1Ecu Diagnosis Information. Power Steering Control Module — 1Dtc/circuit Diagnosis — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation. Power Steering Control Module — 1System Description — 1Removal and Installation — 1System Description — 1System — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Component Parts — 1Basic Inspection — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information. Air Bag Diagnosis Sensor Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1System Description. Description. Ventilation System — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1Basic Inspection — 1Symptom Diagnosis — 1Removal and Installation — 1Electric Compressor — 1Cooler Pipe and Hose — 1A/c Unit Assembly Cover — 1A/c Unit Assembly — 1Heater & Air Conditioning Control System :: Automatic Air Conditioning — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 2Dtc Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 2Preparation. Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Preparation. Instrument Panel — 1Component Parts — 1System — 1Ecu Diagnosis Information. Flexible Center Storage Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information. Driver Lumbar Support Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Manual Function Does Not Operate — 1Memory Function Does Not Operate — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1System (intelligent Key System) — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1U2141-87 Can Comm Circuit — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Automatic Back Door Operation Does Not Operate — 1Back Door Does Not Open — 1Door Does Not Lock/unlock with Door Lock and Unlock Switch — 1Removal and Installation — 1Hood — 1Radiator Core Support — 1Charge Port Lid — 1Front Fender — 1Front Door — 1Rear Door — 1Back Door — 1Hood Lock — 1Front Door Lock — 1Rear Door Lock — 1Back Door Lock — 1Outside Key Antenna — 1System Description — 1System — 1Ecu Diagnosis Information. Inverter (front), Inverter (rear), Bcm, Intelligent Key Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Front Passenger Side Power Window Does Not Operate — 1Rear Lh Side Power Window Does Not Operate — 1Rear Rh Side Power Window Does Not Operate — 1Removal and Installation. Power Window Main Switch — 1Preparation. Preparation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Sunroof Switch Assembly — 1Symptom Diagnosis — 1Auto Operation Does Not Operate — 1Removal and Installation — 1Preparation — 1Description — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Service Information — 6Repair Information — 1Precaution — 1Preparation — 1Removal and Installation — 1Service Data — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information — 1Wiring Diagram. Door Mirror — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Removal and Installation — 1Exterior Lighting System :: Led Headlamp — 1System Description — 3Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1System Description — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm, Intelligent Key Unit — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis. Interior Lighting System Symptom — 1Removal and Installation — 1Service Data. Bulb Specifications — 1System Description — 1System — 1Ecu Diagnosis Information. Bcm, Ipdm E/r — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Removal and Installation. Horn — 1Preparation. Commercial Service Tools Or/and Repair Part — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Approaching Vehicle Sound for Pedestrians (vsp) Control Unit — 1Approaching Vehicle Sound for Pedestrians (vsp) — 1Vsp [approaching Vehicle Sound for Pedestrians (vsp) Control Unit] — 1Approaching Vehicle Sound for Pedestrians (vsp) System — 1Removal and Installation — 1Removal and Installation — 1Wireless Charger — 1System Description — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Removal and Installation — 1Component Parts — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Can Fundamental — 1Description — 1Trouble Diagnosis — 1Can (controller Area Network) — 1Description — 1
25steps
~150min
5/5difficulty
Done 0 of 25
  • Automatic Brake Hold Switch
  • Automatic Brake Hold Indicator Lamp

Automatic Brake Hold Switch Nissan Ariya SUV

Component Function Check

CHECK AUTOMATIC BRAKE HOLD SWITCH INDICATOR

  1. Power switch ON.

  2. Check that automatic brake hold switch indicator turns ON/OFF when automatic brake hold switch is pressed.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Refer to Diagnosis Procedure.

CHECK AUTOMATIC BRAKE HOLD INDICTOR LAMP

Check the automatic brake hold indicator lamp. Refer to Component Function Check.

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

PERFORM SELF-DIAGNOSIS

With CONSULT

Perform “All DTC Reading”.

Is DTC ”ABS”, ”CHASSIS CONTROL”, ”BCM”, or ”EV/HEV” detected?

YES>>

Record or print self-diagnosis results and freeze frame data (FFD). GO TO 2.

NO>>

GO TO 3.

CHECK EACH SYSTEM

Perform the trouble diagnosis of system that DTC indicated.

  • ”ABS”: Refer to DTC Index.

  • ”CHASSIS CONTROL”: Refer to DTC Index.

  • ”BCM”: Refer to DTC Index.

  • ”EV/HEV”: Refer to DTC Index.

>>

GO TO 7.

CHECK AUTOMATIC BRAKE HOLD SWITCH INDICATOR

  1. Power switch OFF and wait at least 1 minute.

  2. Power switch ON.

  3. Automatic brake hold switch ON.

Is automatic brake hold switch indicator illuminated?

YES>>

Check automatic brake hold indicator lamp. Refer to Component Function Check.

NO>>

GO TO 4.

CHECK CONNECTOR AND TERMINAL

  1. Power switch OFF.

  2. Check the automatic brake hold switch harness connector for disconnection or looseness.

  3. Check the chassis control module harness connector for disconnection or looseness.

  4. Disconnect automatic brake hold switch harness connector.

  5. Disconnect chassis control module harness connector.

  6. Check the automatic brake hold switch harness connector terminals for damage or loose connection.

  7. Check the chassis control module harness connector terminals for damage or loose connection with harness connector.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair / replace harness, connector, or terminal. GO TO 7.

CHECK AUTOMATIC BRAKE HOLD SWITCH CIRCUIT

  1. Check the continuity between chassis control module harness connector and automatic brake hold switch harness connector.

    Chassis control moduleAutomatic brake hold switchContinuity
    ConnectorTerminalConnectorTerminal

    M38*1

    M39*2

    22*1

    7*2
    M138 6 Existed

    24*1

    21*2
    1

    *1: Without ProPILOT Assist 2.0

    *2: With ProPILOT Assist 2.0

  2. Check the continuity between chassis control module harness connector and ground.

    Chassis control module—Continuity
    ConnectorTerminal

    M38*1

    M39*2

    22*1

    7*2
    Ground Not existed

    24*1

    21*2

    *1: Without ProPILOT Assist 2.0

    *2: With ProPILOT Assist 2.0

Is the inspection result normal?

YES>>

GO TO 6.

NO>>

Repair / replace harness or connector. GO TO 7.

CHECK AUTOMATIC BRAKE HOLD SWITCH

Check the automatic brake hold switch. Refer to Component Inspection.

Is the inspection result normal?

YES>>

Replace the chassis control module. Refer to CHASSIS CONTROL MODULE : Removal & Installation. GO TO 7.

NO>>

Replace the automatic brake hold switch. Refer to AUTOMATIC BRAKE HOLD SWITCH : Removal & Installation. GO TO 7.

FINAL CHECK

Recheck the symptom and check that the symptom is not reproduced under the same conditions.

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

GO TO 1.

Component Inspection

CHECK AUTOMATIC BRAKE HOLD SWITCH

  1. Power switch OFF.

  2. Disconnect automatic brake hold switch harness connector.

  3. Check the continuity between terminals of automatic brake hold switch connector.

    Automatic brake hold switch Condition Continuity
    Terminal
    1 - 2 Automatic brake hold switch is not pressed Not existed
    Automatic brake hold switch is pressed Existed

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace the automatic brake hold switch. Refer to AUTOMATIC BRAKE HOLD SWITCH : Removal & Installation.

CHECK AUTOMATIC BRAKE HOLD SWITCH INDICATOR

Apply 12 V between automatic brake hold switch connector terminals, and check the automatic brake hold switch indicator.

Automatic brake hold switchConditionAutomatic brake hold switch indicator
Terminal
+-
5 6 Apply 12 V between automatic brake hold switch connector terminals (5 and 6). ON

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace the automatic brake hold switch. Refer to AUTOMATIC BRAKE HOLD SWITCH : Removal & Installation.

Automatic Brake Hold Indicator Lamp Nissan Ariya 1st generation

Component Function Check

CHECK AUTOMATIC BRAKE HOLD INDICATOR LAMP (WHITE) FUNCTION

  1. Set the Nissan Ariya vehicle to READY.

  2. Press automatic brake hold switch, and check that the indicator lamp illuminates when automatic brake hold function is changed to the standby state.

  3. Press automatic brake hold switch again, and check that the indicator lamp turns OFF when automatic brake hold function is stopped.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Refer to Diagnosis Procedure.

CHECK AUTOMATIC BRAKE HOLD INDICATOR LAMP (GREEN) FUNCTION

  1. Check that the indicator lamp illuminates while automatic brake hold function is being applied.

  2. Check that the color of automatic brake hold indicator lamp changes from green to white when the Nissan Ariya vehicle is started and automatic brake hold function is released.

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

PERFORM SELF-DIAGNOSIS

With CONSULT

Perform “All DTC Reading”.

Is DTC ”ABS”, ”CHASSIS CONTROL”, ”BCM”, or ”EV/HEV" detected?

YES>>

Record or print self-diagnosis results and freeze frame data (FFD). GO TO 2.

NO>>

GO TO 3.

CHECK EACH SYSTEM

Perform the trouble diagnosis of system that DTC indicated.

  • ”ABS”: Refer to DTC Index.

  • ”CHASSIS CONTROL”: Refer to DTC Index.

  • ”BCM”: Refer to DTC Index.

  • ”EV/HEV”: Refer to DTC Index.

>>

GO TO 11.

CHECK AUTOMATIC BRAKE HOLD INDICATOR LAMP

  1. Power switch OFF and wait at least 1 minute.

  2. Power switch ON.

  3. Automatic brake hold switch ON.

Is automatic brake hold indicator lamp illuminated?

YES>>

Check automatic brake hold switch. Refer to Component Function Check. GO TO 11.

NO>>

GO TO 4.

CHECK OPERATION CONDITIONS OF AUTOMATIC BRAKE HOLD

Check operation conditions of automatic brake hold function. Refer to System Description.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Satisfy the operating conditions. GO TO 11.

CHECK DATA MONITOR (1)

With CONSULT

Select “CHASSIS CONTROL”, “Data monitor” according this order, check the “VDC malfunction status”. Refer to Values On The Diagnosis Tool.

Is the "ON" displayed?

YES>>

GO TO 8.

NO>>

GO TO 6.

CHECK DATA MONITOR (2)

With CONSULT

Select “CHASSIS CONTROL”, “Data monitor” according this order, check the “Stop hold (VDC)”. Refer to Values On The Diagnosis Tool.

Is the “impossible” displayed?

YES>>

GO TO 8.

NO>>

GO TO 7.

CHECK COMBINATION METER

Check the combination meter. Refer to On Board Diagnosis Function.

Is the inspection result normal?

YES>>

GO TO 11 .

NO>>

Repair or replace integrated interface display. Refer to Removal and Installation. GO TO 11.

CHECK DATA MONITOR (3)

With CONSULT

Select “CHASSIS CONTROL”, “Data monitor” according this order, check the “Accelerator pedal position”. Refer to Values On The Diagnosis Tool.

Is the “127%” or more displayed?

YES>>

GO TO 9.

NO>>

GO TO 10.

CHECK VCM

Check the VCM. Refer to Work Flow.

Is the inspection result normal?

YES>>

GO TO 11.

NO>>

Repair or replace VCM. Refer to VCM : Removal & Installation. GO TO 11.

CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

Check the ABS actuator and electric unit (control unit). Refer to Work Flow.

Is the inspection result normal?

YES>>

GO TO 11.

NO>>

Repair or replace ABS actuator and electric unit (control unit). Refer to ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) : Removal & Installation. GO TO 11.

FINAL CHECK

Recheck the symptom and check that the symptom is not reproduced under the same conditions.

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

GO TO 1.