System

In this manual: System
How to Use This Manual — 1Precautions — 1Preparation — 1Vehicle Information — 1Basic Inspection — 1Preparation. Commercial Service Tools Or/and Repair Part — 1Description — 1Component Parts — 1System — 1Diagnosis System (vcm) — 1Ecu Diagnosis Information. Vcm — 1Ev Control System — 1Ev/hev (vcm) — 1Component Parts /circuit Diagnosis — 1Ev Control System — 1Periodic Maintenance. Ev System Warning Lamp — 1Removal and Installation. Vcm — 1Traction Motor System :: Front Traction Motor — 1Preparation — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Traction Motor System :: Rear Traction Motor — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Ev Battery System :: 66kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 2Service Data — 1Ev Battery System :: 91kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 1Service Data — 2Preparation. Vehicle Charging System — 1Vehicle Charging System :: Description — 1Component Parts — 2System — 1Diagnosis System (on-Board Charger) — 1Diagnosis System (dc/dc Converter) — 1Ecu Diagnosis Information — 1Vehicle Charging System — 1Charger/pd Module (on-Board Charger) — 1Cplc (cplc) — 1Dcdc (dc/dc Converter) — 1Component Parts/circuit Diagnosis — 1Symptom Diagnosis — 1Evse Inspection — 1Periodic Maintenance — 1Removal and Installation — 1Disassembly and Assembly — 1Preparation. High Voltage Cooling System — 1Description — 1Symptom Diagnosis. Overheating Cause Analysis — 1Periodic Maintenance — 1Coolant — 1Removal and Installation — 1Radiator — 1Service Data — 1Removal and Installation. Accelerator Control System — 1Reduction Gear: Re1f62a — 1Removal and Installation — 1Transaxle & Transmission :: Electric Shift — 1Description — 3Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Rear Final Drive: Rn1r62a — 1Removal and Installation — 1Preparation. Front Axle System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data. Front Drive Shaft — 12wd — 14wd — 1Periodic Maintenance — 1Removal and Installation — 1Preparation. Front Suspension System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Road Wheels & Tires System — 1Description — 1System — 1Ecu Diagnosis Information. Bcm (body Control Module) — 1Tpms — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Road Wheels & Tires — 1Removal and Installation — 1Service Data — 1Preparation. Brake System — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Electrically-Driven Intelligent Brake Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Parking Brake System — 1System Description — 1Component Parts — 1System — 1Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit) — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Brake Control System :: With Vdc — 1System Description — 3Basic Inspection — 2Dtc/circuit Diagnosis — 1Symptom Diagnosis — 2Removal and Installation — 1Brake Control System :: Automatic Brake Hold — 1System Description — 3Component Parts /circuit Diagnosis — 1Removal and Installation — 1Brake Control System :: E-Step — 1System Description — 3Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Symptom Diagnosis — 1Rear Automatic Braking — 1System Description — 1Basic Inspection — 1Preparation. Steering System — 1System Description — 1Component Parts — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Steering Wheel — 1Removal and Installation — 1Service Data — 1System Description — 1Component Parts — 1Steering Control System — 1Ecu Diagnosis Information. Power Steering Control Module — 1Dtc/circuit Diagnosis — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation. Power Steering Control Module — 1System Description — 1Removal and Installation — 1System Description — 1System — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Component Parts — 1Basic Inspection — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information. Air Bag Diagnosis Sensor Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1System Description. Description. Ventilation System — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1Basic Inspection — 1Symptom Diagnosis — 1Removal and Installation — 1Electric Compressor — 1Cooler Pipe and Hose — 1A/c Unit Assembly Cover — 1A/c Unit Assembly — 1Heater & Air Conditioning Control System :: Automatic Air Conditioning — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 2Dtc Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 2Preparation. Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Preparation. Instrument Panel — 1Component Parts — 1System — 1Ecu Diagnosis Information. Flexible Center Storage Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information. Driver Lumbar Support Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Manual Function Does Not Operate — 1Memory Function Does Not Operate — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1System (intelligent Key System) — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1U2141-87 Can Comm Circuit — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Automatic Back Door Operation Does Not Operate — 1Back Door Does Not Open — 1Door Does Not Lock/unlock with Door Lock and Unlock Switch — 1Removal and Installation — 1Hood — 1Radiator Core Support — 1Charge Port Lid — 1Front Fender — 1Front Door — 1Rear Door — 1Back Door — 1Hood Lock — 1Front Door Lock — 1Rear Door Lock — 1Back Door Lock — 1Outside Key Antenna — 1System Description — 1System — 1Ecu Diagnosis Information. Inverter (front), Inverter (rear), Bcm, Intelligent Key Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Front Passenger Side Power Window Does Not Operate — 1Rear Lh Side Power Window Does Not Operate — 1Rear Rh Side Power Window Does Not Operate — 1Removal and Installation. Power Window Main Switch — 1Preparation. Preparation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Sunroof Switch Assembly — 1Symptom Diagnosis — 1Auto Operation Does Not Operate — 1Removal and Installation — 1Preparation — 1Description — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Service Information — 6Repair Information — 1Precaution — 1Preparation — 1Removal and Installation — 1Service Data — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information — 1Wiring Diagram. Door Mirror — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Removal and Installation — 1Exterior Lighting System :: Led Headlamp — 1System Description — 3Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1System Description — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm, Intelligent Key Unit — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis. Interior Lighting System Symptom — 1Removal and Installation — 1Service Data. Bulb Specifications — 1System Description — 1System — 1Ecu Diagnosis Information. Bcm, Ipdm E/r — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Removal and Installation. Horn — 1Preparation. Commercial Service Tools Or/and Repair Part — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Approaching Vehicle Sound for Pedestrians (vsp) Control Unit — 1Approaching Vehicle Sound for Pedestrians (vsp) — 1Vsp [approaching Vehicle Sound for Pedestrians (vsp) Control Unit] — 1Approaching Vehicle Sound for Pedestrians (vsp) System — 1Removal and Installation — 1Removal and Installation — 1Wireless Charger — 1System Description — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Removal and Installation — 1Component Parts — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Can Fundamental — 1Description — 1Trouble Diagnosis — 1Can (controller Area Network) — 1Description — 1
~12min read
  • Body Control System
  • Combination Switch Reading System
  • Signal Buffer System
  • Power Consumption Control System
  • Shipping Mode Control System

Body Control System Nissan Ariya 2023

System Description

OUTLINE

  • BCM (Body Control Module) controls the various electrical components. It inputs the information required to the control from CAN communication and the signal received from each switch and sensor.

  • BCM has combination switch reading function for reading the operation status of combination switches (light, turn signal, wiper and washer) in addition to a function for controlling the operation of various electrical components. It also has the signal transmission function as the passed point of signal and the power saving control function that reduces the power consumption with the power switch OFF.

  • BCM is equipped with the diagnosis function that performs the diagnosis with CONSULT and various settings.

BCM CONTROL FUNCTION LIST

SystemReference
Power door lock system Refer to System Description.
Back door opener system Refer to System Description.
Nissan Ariya Vehicle security system Refer to System Description.
Power window system Refer to System Description.
Sunroof system Refer to System Description.
Auto retractable door mirror system Refer to System Description.
Headlamp system Refer to System Description.
Intelligent auto light system Refer to System Description.
High beam assist system Refer to System Description.
Daytime running light system Refer to System Description.
Turn signal and hazard warning lamp system Refer to System Description.
Parking, license plate, side marker and tail lamps system Refer to System Description.
Stop lamp system Refer to System Description.
Front fog lamp system Refer to System Description.
Back-up lamp system Refer to System Description.
Exterior lamp battery saver system Refer to System Description.
Interior room lamp control system Refer to System Description.
Interior room lamp battery saver system Refer to System Description.
Illumination control system Refer to System Description.
Front wiper and washer system
  • Refer to System Description. (with light and rain sensor)

  • Refer to System Description. (without light and rain sensor)

Rear wiper and washer system Refer to System Description.
Defogger system Refer to System Description.
Power distribution system Refer to System Description.
Auto ACC function Refer to System Description.
Combination switch reading system Refer to System Description.
Signal buffer system Refer to System Description.
Power consumption control system Refer to System Description.
Shipping mode control system Refer to System Description.

MAC (MESSAGE AUTHENTICATION CODE)

MAC (Message Authentication Code) is a function that prevents unauthorized communication from other than the ECU with MAC function by secure authentication communication. BCM can write a MAC key required for communication between the ECUs and perform MAC diagnosis.

Fail-safe

FAIL-SAFE CONTROL BY DTC

BCM performs fail-safe control when any DTC are detected.

Display contents of CONSULTFail-safe

B2C40–04: Power window main switch

(When power window lock switch has been pressed for 30 seconds or more)

Power window lock status is continued.

[Power switch OFF (Auto ACC OFF status), and then power switch ON again to cancel the power window lock status.]
B2C41-04: Power window motor FL Front power window motor (driver side) operation is stop or inching
B2C42-04: Power window motor FR Front power window motor (passenger side) operation is stop or inching
B2C43-04: Power window motor RL Rear power window motor LH operation is stop or inching
B2C44-04: Power window motor RR Rear power window motor RH operation is stop or inching
B2C76-04: Ambient light 1 Advanced ambient light (instrument upper RH) OFF or dimmed lighting.
B2C77-04: Ambient light 2 Advanced ambient light (instrument upper LH) OFF or dimmed lighting.
B2C78-04: Ambient light 3 Advanced ambient light (front door RH) OFF or dimmed lighting.
B2C79-04: Ambient light 4 Advanced ambient light (front door LH) OFF or dimmed lighting.
B2C95-01: Combination switch Turns ON the headlamp (LO)
B2C95-64: Combination switch Turns ON the headlamp (LO)
B2C96-49: Light sensor Turns ON the headlamp (LO)
B2CB5-64: Rear wiper Stop rear wiper power supply for 1 minute
B2F98-04: Sunshade motor Sunshade auto operation is forbidden
B2F99-04: Sunroof motor Sunroof auto operation is forbidden
B2FAE-12: Ignition relay-1 Inhibit setting the Nissan Ariya vehicle to READY
B2FAE-14: Ignition relay-1 Inhibit setting the Nissan Ariya vehicle to READY

Combination Switch Reading System Nissan Ariya first Gen

System Description

SYSTEM DIAGRAM

OUTLINE

  • BCM reads the status of the combination switch and recognizes the status of each switch.

  • BCM has a combination of 6 input terminals (INPUT 1 - 6) and 6 output terminals (OUTPUT 1 - 6), reads a maximum of 23 switch states and 6 check diode states.

COMBINATION SWITCH MATRIX

Combination switch INPUT-OUTPUT system list
SystemINPUT 1INPUT 2INPUT 3INPUT 4INPUT 5INPUT 6
OUTPUT 1 Check diode 1 INT volume 1 Front washer switch Front wiper LO INT volume 2 Front wiper OFF
OUTPUT 2 High beam switch Check diode 2 Rear washer switch Front wiper HI INT volume 3 Front wiper MIST
OUTPUT 3 Passing switch Low beam switch Check diode 3 Front wiper INT Rear wiper INT —
OUTPUT 4 — AUTO light switch Turn signal LH Check diode 4 Rear wiper ON —
OUTPUT 5 Front fog switch Tail lamp switch Turn signal RH Light OFF switch Check diode 5 High beam assist switch
OUTPUT 6 — — — — — Check diode 6

COMBINATION SWITCH READING FUNCTION

Description

  • BCM reads the status of the combination switch at 10 ms intervals normally.

  • BCM operates as follows and judges the status of the combination switch.

    • It operates the transistor on INPUT side in the following order: OUTPUT 6–> 5 –> 4 –> 3 –> 2 –> 1, and outputs voltage waveform.

    • The voltage waveform of OUTPUT corresponding to the formed circuit is input into the interface on INPUT side if any (1 or more) switches are ON.

    • It reads this change of the voltage as the status signal of the combination switch.

Operation Example

In the following operation example, the combination of the status signals of the combination switch is replaced as follows: INPUT 1 - 6 to “ - ” and OUTPUT 1 - 6 to “ - ”.

Example 1: When a switch (Turn signal RH) is turned ON

  • The circuit between INPUT 3 () and OUTPUT 5 () is formed when the Turn signal RH is turned ON.

  • BCM detects the combination switch status signal “” when the signal of INPUT 3 is input to OUTPUT 5.

  • BCM judges that the Turn signal RH is ON when the signal “” is detected.

Example 2: When some switches (Front fog switch, Turn signal RH) are turned ON

  • The circuits between INPUT 1 () and OUTPUT 5 () and between INPUT 3 () and OUTPUT 5 () are formed when the Front fog switch and Turn signal RH are turned ON.

  • BCM detects the combination switch status signal “” when the signals of INPUT 1 and INPUT 3 are input to OUTPUT 5.

  • BCM judges that the Front fog switch and Turn signal RH are ON when the signal “” is detected.

WIPER INTERMITTENT DIAL POSITION (WITH WIPER INTERMITTENT DIAL POSITION)

BCM judges the wiper intermittent dial 1 - 5 by the status of INT volume 1, 2 and 3 switches.

Wiper intermittent

dial position
Switch status
INT volume 1INT volume 2INT volume 3
1 ON ON OFF
2 ON OFF OFF
3 OFF OFF OFF
4 OFF OFF ON
5 OFF ON ON

Signal Buffer System Nissan Ariya

System Description

SYSTEM DIAGRAM

Parts nameSystem description
Each switch (sensor) Outputs the each signal to BCM.
BCM BCM has the signal transmission function that outputs/transmits each input/received signal to each unit.
Each unit Inputs the each signal from BCM.

OUTLINE

BCM has the signal transmission function that transmits each input signal to each unit.

Signal transmission function list

Signal nameInputOutputDescription
Door switch signal Each door switch
  • Combination meter

  • Driver seat control unit

  • ADAS control unit 2

  • Around view monitor control unit

  • VCM

  • ABS actuator and electric unit (control unit)

Inputs the each door switch signal and transmits the door switch signal judged with BCM via CAN communication.
Brake pedal position switch signal Stop lamp switch ADAS control unit 2 Inputs the stop lamp switch signal and transmits the brake pedal position switch signal judged with BCM via CAN communication.
Drive mode select switch signal Driver mode select switch Chassis control module Inputs the drive mode select switch signal and transmits the drive mode select switch signal judged with BCM via CAN communication.
Seat belt buckle switch (driver side) signal Front seat belt buckle switch (driver side)
  • Air bag diagnosis sensor unit

  • Combination meter

  • Chassis control module

  • ABS actuator and electric unit (control unit)

Inputs the front seat belt buckle switch (driver side) signal and transmits the seat belt buckle switch (driver side) signal judged with BCM via CAN communication.
Hazard switch signal Hazard switch Around view monitor control unit Inputs the hazard switch signal and transmits the hazard switch signal judged with BCM via CAN communication.
Stop lamp switch signal Stop lamp switch
  • Approaching Nissan Ariya vehicle sound for pedestrians (VSP) control unit

  • ADAS control unit 2

  • Chassis control module

  • ABS actuator and electric unit (control unit)

  • Electric shift control module

Inputs the stop lamp switch signal and transmits stop lamp switch signal via CAN communication.
Combination switch reading function Combination switch
  • IPDM E/R

  • Around view monitor control unit

Inputs the combination switch reading function and transmits the each combination switch signal judged with BCM via CAN communication.

Power Consumption Control System Nissan Ariya 1st generation

System Description

SYSTEM DIAGRAM

ComponentFunction
BCM BCM transmits sleep wake up signal to each unit when condition is established, and then goes into each mode.
Intelligent Key unit
  • Transmits the sleep-ready signal and wake up signal to BCM via CAN communication.

  • Receives the sleep wake up signal from BCM via CAN communication.

IPDM E/R
Steering column control module
Driver seat control unit
Automatic back door control unit
Passenger seat control unit
TCU
Combination meter
  • Transmits the sleep-ready signal to BCM via CAN communication.

  • Receives the sleep wake up signal from BCM via CAN communication.

VCM
Chassis control module
AV control unit
BOSE amp.
Electrically-driven intelligent brake unit Receives the sleep wake up signal from BCM via CAN communication.
Each switch Each switch transmits the Nissan Ariya vehicle status to BCM.

OUTLINE

BCM incorporates a power saving control function that reduces the power consumption according to the Nissan Ariya vehicle status.

Low power consumption mode (sleep)

  • CAN transmission is stopped to other units

  • Each control with BCM is operating low power consumption mode

Normal mode (wake-up)

  • CAN communication is normally performed

  • Each control with BCM is operating normally

Low power consumption mode activation

  • BCM receives the sleep-ready signal from each unit via CAN communication.

  • BCM transmits the sleep wake up signal (sleep) to each unit when receive the sleep-ready signal from each unit.

  • Each unit stops the transmission of CAN communication with the sleep wake up signal (sleep).

  • BCM perform the low power consumption control when fulfilled with all sleep conditions.

    • Power switch OFF (not auto ACC status)

    • Interior room lamp power supply OFF

    • Navigation and audio system OFF

Wake-up operation

  • BCM transmits sleep wake up signal (wake up) to each unit when sleep conditions change, and then goes into normal mode from low power consumption mode.

  • Each unit starts transmissions with CAN communication by receiving sleep wake up signal (wake up).

  • BCM stop the low power consumption control when fulfilled with any wake up conditions.

    Power switch OFF → ON Door closed → opened Door lock / unlock operation

Shipping Mode Control System Nissan Ariya: FE0

System Description

SYSTEM DIAGRAM

DESCRIPTION

  • BCM switches the status (shipping mode or normal mode) by itself according to the extended storage fuse switch condition, and transmits shipping mode status signal to combination meter and each unit via CAN communication.

  • When shipping mode function operates, each control unit does not detect DTCs.

  • BCM control functions are limited in shipping mode. Refer to Description.

  • The combination meter displays extended storage fuse warning message on the information display, when BCM is in shipping mode.