Removal and Installation
- Front Seat
- Front Seatback
- Front Seat Cushion
- Front Seat Cushion Finisher
- Rear Seat
- Rear Seatback
- Rear Seat Cushion
- Power Seat Switch
- Lumbar Support Switch
- Seat Blower Motor
- Rear Heated Seat Switch
Front Seat Nissan Ariya 1st generation
Exploded View
REMOVAL

| Headrest | Front seat assembly | ||||
| : N·m (kg-m, ft-lb) | |||||
DISASSEMBLY
Power seat

| Headrest holder (lock) | Headrest holder (free) | Seatback assembly | |||
| Lumber support unit | Inside seat cushion finisher inner | Inside seat cushion finisher outer | |||
| Inside seat cushion finisher lower outer | Inside seat cushion finisher lower inner | Seat cushion suspension | |||
| Seat cushion harness bracket | Seat cushion blower motor * |
Seat cushion pad | |||
| Seat cushion trim | Seat cushion lower end cap front inner | Seat cushion lower end cap front outer | |||
| Driver seat control unit | Seat cushion frame | Outside seat cushion finisher lower | |||
| Power seat switch | Lumber support switch | Slide switch knob | |||
| Reclining switch knob | Outside seat cushion finisher outer | Seat cushion lower end cap rear outer | |||
| Seat cushion lower end cap rear inner | Outside seat cushion finisher inner | Seatback blower motor * |
|||
| : Clip | |||||
| : Pawl | |||||
| : Metal clip | |||||
| : Always replace after every disassembly. | |||||
| : N·m (kg-m, ft-lb) | |||||
*: With heater and ventilation seat system

| Headrest holder (lock) | Headrest holder (free) | Seatback blower motor *1 |
|||
| Outside seat cushion finisher inner | Seat cushion lower end cap rear inner | Seat cushion lower end cap rear outer | |||
| Power seat switch | Outside seat cushion finisher outer | Reclining switch knob | |||
| Slide switch knob | Outside seat cushion finisher lower | Seat cushion frame | |||
Passenger seat control unit *2 |
Seat cushion lower end cap front outer | Occupant detection system control unit | |||
| Seat cushion lower end cap front inner | Seat cushion blower motor *1 |
Seat cushion pad | |||
| Seat cushion trim | Seat cushion harness bracket | Seat cushion suspension | |||
| Inside seat cushion finisher lower inner | Inside seat cushion finisher lower outer | Inside seat cushion finisher outer | |||
| Seatback suspension | Inside seat cushion finisher inner | Seatback assembly | |||
| : Clip | |||||
| : Pawl | |||||
| : Metal clip | |||||
| : Always replace after every disassembly. | |||||
| : N·m (kg-m, ft-lb) | |||||
*1: With heater and ventilation seat system
*2: With memory function
Manual Seat

| Headrest holder (lock) | Headrest holder (free) | Seatback assembly | |||
| Seatback suspension | Inside seat cushion finisher inner | Inside seat cushion finisher outer | |||
| Inside seat cushion finisher lower outer | Inside seat cushion finisher lower inner | Seat cushion suspension | |||
| Seat cushion harness bracket | Seat cushion pad | Seat cushion trim | |||
| Seat cushion lower end cap front inner | Seat cushion lower end cap front outer | Seat cushion frame | |||
| Outside seat cushion finisher lower | Lifter knob | Outside seat cushion finisher outer | |||
| Reclining knob | Seat cushion lower end cap rear outer | Seat cushion lower end cap rear inner | |||
| Outside seat cushion finisher inner | |||||
| : Clip | |||||
| : Pawl | |||||
| : Metal clip | |||||
| : Always replace after every disassembly. | |||||
| : N·m (kg-m, ft-lb) | |||||

| Headrest holder (lock) | Headrest holder (free) | Outside seat cushion finisher inner | |||
| Seat cushion lower end cap rear inner | Seat cushion lower end cap rear outer | Reclining knob | |||
| Outside seat cushion finisher outer | Lifter knob | Outside seat cushion finisher lower | |||
| Seat cushion frame | Seat cushion lower end cap front outer | Occupant detection system control unit | |||
| Seat cushion lower end cap front inner | Seat cushion pad | Seat cushion trim | |||
| Seat cushion harness bracket | Seat cushion suspension | Inside seat cushion finisher lower inner | |||
| Inside seat cushion finisher lower outer | Inside seat cushion finisher outer | Seatback suspension | |||
| Inside seat cushion finisher inner | Seatback assembly | ||||
| : Clip | |||||
| : Pawl | |||||
| : Metal clip | |||||
| : Always replace after every disassembly. | |||||
| : N·m (kg-m, ft-lb) | |||||
Removal & Installation
REMOVAL

| Headrest holder | |
| Center of installing hole for headrest | |
| Mounting bolt of seatback assembly |
Remove headrest.
Remove lap pre-tensioner anchor from lap pre-tensioner. Refer to Removal & Installation.
Fully lift up front seat.
Remove front seat mounting bolts.Slide front seat to front most position. Remove front seat mounting bolts of rear side. Slide front seat to rear most position. Remove front seat mounting bolts of front side.
Disengage harness fixing clips of seat cushion lower, and then disconnect harness connectors.
When working, be careful to prevent accidental explosion the each air bag module, refer to Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER".
Never insert the screw driver etc. to the each air bag module harness connector. (To prevent accidental explosion the inflator by static electricity)
Remove front seat from Nissan Ariya vehicle.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Front Seatback Nissan Ariya first Gen
Disassembly & Assembly
DISASSEMBLY
Remove outside and inside seat cushion finisher outer. Refer to Disassembly & Assembly.
Disengage seatback trim fixing retainer
.
Power seat

Manual seat

Disengage seatback trim fixing retainers
.

Open seatback trim fixing fasteners
.

Disengage seatback trim fixing retainers
.

Disconnect seatback heater harness connector, and then disengage harness fixing clips. (If equipped)
Disengage fixing pawls according to numerical order 1→4 indicated by arrows as shown in figure, and then remove headrest holders.

Remove seatback blower motor. (If equipped) Refer to Removal and Installation.
Remove lumber support unit. (If equipped)Disconnect lumber support unit harness connector, and then disengage harness fixing clips. Disengage fixing clip, and then remove lumber support unit.
Remove seatback suspension. (If equipped)
Disconnect harness connectors of seat frame and seat cushion harness bracket, and then disengage harness fixing clips.
Remove seatback assembly.Remove outside and inside seat cushion finisher inner. Refer to Disassembly & Assembly. Remove mounting bolts, and then remove seatback assembly.
ASSEMBLY
Note the following items, and then assemble in the reverse order of disassembly.
Front Seat Cushion Nissan Ariya first Gen
Disassembly & Assembly
DISASSEMBLY
Remove fixing screws, and then remove occupant detection system control unit. (If equipped)
Remove outside and inside seat cushion finisher outer. Refer to Disassembly & Assembly.
Disconnect lap pre-tensioner harness connector
.

Disengage seatback trim fixing retainer
.
Power seat

Manual seat

Disengage seatback trim fixing retainers
.

Open seatback trim fixing fasteners
.

Disengage seatback trim fixing retainers
.

Disconnect harness connectors of seat frame and seat cushion harness bracket, and then disengage harness fixing clips.
Remove seat cushion blower motor
fixing screws
. (If equipped)

Disengage fixing pawls according to numerical order 1→3 indicated by arrows as shown in figure, and then remove seat cushion harness bracket.

| : Pawl |
Disengage seat cushion trim fixing retainers
.

Disengage seat cushion trim fixing retainers
.

Remove seat cushion trim and pad as a set from seat cushion frame.

Remove hog rings, and then separate seat cushion trim and pad.
Remove seat cushion suspension.
Remove driver seat control unit. Refer to Removal and Installation.
Remove passenger seat control unit. (If equipped) Refer to Removal and Installation.
Remove seatback assembly. Refer to Disassembly & Assembly.
ASSEMBLY
Note the following items, and then assemble in the reverse order of disassembly.
Front Seat Cushion Finisher Nissan Ariya 2023
Disassembly & Assembly
OUTSIDE SEAT CUSHION FINISHER OUTER / LOWER
DISASSEMBLY (Power seat)
Apply protect tape (A) to prevent damage.

Disengage outside seat cushion finisher outer fixing clip, pawls and metal clip using a remover tool (A).

| : Clip | |
| : Pawl | |
| : Metal clip |
Pull out fixing hook portion
according to numerical order 1→2 indicated by arrows as shown in figure, and then remove outside seat cushion finisher outer.

Disconnect harness connectors of outside seat cushion finisher outer, and then disengage harness fixing clips.
Disengage outside seat cushion finisher lower fixing pawl and metal clip, and then remove fixing screw
.

| : Pawl | |
| : Metal clip |
Remove outside seat cushion finisher lower according to numerical order 1→2 indicated by arrows as shown in figure.

DISASSEMBLY (Manual seat)
Remove lifter knob while pulling portion
according to numerical order 1→2 indicated by arrows as shown in figure.

Remove mounting bolt
, and then remove reclining knob.

Remove outside seat cushion finisher outer fixing screw
.

Apply protect tape (A) to prevent damage.

Disengage outside seat cushion finisher outer fixing clip, pawls and metal clip using a remover tool (A).

| : Clip | |
| : Pawl | |
| : Metal clip |
Pull out fixing hook portion
according to numerical order 1→2 indicated by arrows as shown in figure, and then remove outside seat cushion finisher outer.

Disengage outside seat cushion finisher lower fixing pawl and metal clip, and then remove fixing screw
.

| : Pawl | |
| : Metal clip |
Remove outside seat cushion finisher lower according to numerical order 1→2 indicated by arrows as shown in figure.

ASSEMBLY
Assemble in the reverse order of disassembly.
INSIDE SEAT CUSHION FINISHER OUTER / LOWER OUTER / LOWER INNER
DISASSEMBLY
Disengage fixing pawls, and then remove inside seat cushion finisher lower outer.

| : Pawl |
Disengage harness fixing clip of inside seat cushion finisher lower outer, and then disconnect harness connector.
Remove fixing screw
, and then remove inside seat cushion finisher lower inner.

Remove front seat belt buckle. Refer to Removal & Installation.
Apply protect tape (A) to prevent damage.

Disengage inside seat cushion finisher outer fixing clip, pawls and metal clip using a remover tool (A).

| : Clip | |
| : Pawl | |
| : Metal clip |
Pull out fixing hook portion
according to numerical order 1→2 indicated by arrows as shown in figure, and then remove inside seat cushion finisher outer.

ASSEMBLY
Assemble in the reverse order of disassembly.
INSIDE / OUTSIDE SEAT CUSHION FINISHER INNER
DISASSEMBLY
Remove seat cushion trim and pad. Refer to Disassembly & Assembly.
Remove fixing screw, and then remove inside and outside seat cushion finisher inner.
ASSEMBLY
Assemble in the reverse order of disassembly.
SEAT CUSHION LOWER END CAP INNER / OUTER
DISASSEMBLY
Disengage fixing pawls
and
using a remover tool (C) according to numerical order 1→2 indicated by arrows as shown in figure, and then remove seat cushion lower end cap.
Front side


: Pawl Rear side


: Pawl
ASSEMBLY
Assemble in the reverse order of disassembly.
Rear Seat Nissan Ariya SUV
Exploded View
REMOVAL

| Headrest LH | Center headrest | Seatback assembly LH | |||
| Headrest RH | Seatback assembly RH | Seatback striker RH | |||
| Seatback bolster RH | Center hinge | Seat cushion assembly | |||
| Seat cushion hook | Seatback bolster LH | Seatback striker LH | |||
| Center hinge cover | |||||
| : Pawl | |||||
| : Always replace after every disassembly. | |||||
| : N·m (kg-m, ft-lb) | |||||
DISASSEMBLY
Seat cushion

| Seat cushion trim | Seat cushion pad |
Seatback RH

| Headrest holder (lock) | Headrest holder (free) | Seatback lock knob escutcheon | |||
| Seatback lock knob | Knob cable | Seatback lock cover | |||
| Seatback frame | Seatback silencer | Seatback pad | |||
| Seatback trim | |||||
| : Clip | |||||
| : Pawl | |||||
| : Metal clip | |||||
Seatback LH

| Seatback lock cover | Knob cable | Seatback lock knob escutcheon | |||
| Seatback lock knob | Headrest holder (lock) | Headrest holder (free) | |||
| Center seat belt finisher | Seatback frame | Armrest hinge cover* | |||
| Armrest bush* | Armrest assembly* | Armrest hinge bush* | |||
| Seatback pad | Seatback trim | Seatback silencer | |||
| : Clip | |||||
| : Pawl | |||||
| : Metal clip | |||||
| : N·m (kg-m, ft-lb) | |||||
*: With armrest
Removal & Installation
REMOVAL
Remove seat cushion assembly.Lift up seat cushion assembly at a close position
of engaging portion
, and then disengage seat cushion hooks.


Remove seatback bolster.Remove mounting bolt
.



Remove seatback assembly RH.Remove headrest RH. Remove luggage finisher mask RH. Refer to Removal & Installation. Remove seatback assembly RH mounting nuts
.


Remove seatback assembly LH.Remove center headrest and headrest LH. Remove luggage finisher mask LH. Refer to Removal & Installation. Remove center seat belt anchor plate. Refer to Removal & Installation. Remove seatback assembly LH mounting nuts
.


Remove luggage floor spacer. Refer to Removal & Installation.
Remove center hinge cover.

Remove mounting bolts
, and then remove center hinge.

Disengage fixing pawls while turn over floor carpet, and then remove seat cushion hook.

| : Pawl |
Remove luggage side lower finisher. Refer to Removal & Installation.
Remove mounting bolts
, and then remove seatback striker.

INSTALLATION
Note the following items, and then install in the reverse order of removal.
Rear Seatback Nissan Ariya
Disassembly & Assembly
DISASSEMBLY
Disengage fixing pawls according to numerical order 1→3 indicated by arrows as shown in figure, and then remove center seat belt finisher. (Seatback assembly LH)

| : Pawl | |
| : Nissan Ariya Vehicle front |
Disengage fixing pawls while raising up part
of seatback lock knob by using remover tool (A), and then remove seatback lock knob escutcheon.

| : Pawl | |
| : Nissan Ariya Vehicle front |
Disengage fixing metal clips using a remover tool (A), and then remove seatback lock cover.

| : Metal clip |
Disengage seatback trim fixing retainer
.
Seatback assembly LH

Seatback assembly RH

Open seatback trim fixing fastener
.
Seatback assembly LH

Seatback assembly RH

Pull out end of seatback trim fixing fastener
, and then open it.
Seatback assembly LH

Seatback assembly RH

Disengage seatback trim fixing retainer
.
Seatback assembly LH

Seatback assembly RH

Remove armrest assembly. (If equipped)Remove fixing clip
, and then remove armrest hinge cover.



Disengage fixing pawls while pinching pawls according to arrows as shown in figure, and then remove headrest holder.

Remove seatback trim and pad as a set from seatback frame.
Remove seatback silencer.
Remove hog ring, and then separate seatback trim and pad.
Remove seatback lock knob.Disengage knob cable fixing clip. Disengage the end of knob cable
from seatback frame latch
according to numerical order 1→3 indicated by arrows while pulling latch as shown in figure.



Remove knob cable from seatback lock knob according to numerical order 1→3 indicated by arrows as shown in figure.

ASSEMBLY
Note the following items, and then assemble in the reverse order of disassembly.
Rear Seat Cushion Nissan Ariya first Gen
Disassembly & Assembly
DISASSEMBLY
Remove hog rings, and then separate seat cushion trim and pad.
ASSEMBLY
Note the following items, and then assemble in the reverse order of disassembly.
Power Seat Switch Nissan Ariya 2023
Removal and Installation
REMOVAL
Disengage fixing pawls using a remover tool (A) and then remove sliding switch knob
.

Disengage fixing pawls using a remover tool (A) and then remove reclining switch knob
.

Remove outside seat cushion finisher outer. Refer to Disassembly & Assembly.
Remove fixing screws
and then remove power seat switch
.

INSTALLATION
Install in the reverse order of removal.
Lumbar Support Switch Nissan Ariya 2026
Removal and Installation
REMOVAL
Remove outside seat cushion finisher outer. Refer to Disassembly & Assembly.
Remove fixing screws
and then remove lumbar support switch
.

INSTALLATION
Install in the reverse order of removal.
Seat Blower Motor Nissan Ariya SUV
Removal and Installation
REMOVAL
Since the seat cushion blower motor is integrated with the seat cushion pad, replace the seat cushion pad. Refer to Disassembly & Assembly.
Open the seatback trim on the front seat to reveal the seat back blower motor. Refer to Disassembly & Assembly.
Disengage seatback blower motor harness connector fixing clip and then disconnect harness connector
.

| : Clip |
Remove seatback blower motor mounting bolts
.

Disengage fixing pawls and then seatback blower motor.

| : Pawl |
INSTALLATION
Install in the reverse order of removal.
Rear Heated Seat Switch Nissan Ariya SUV
Removal and Installation
REMOVAL
Remove center console finisher rear upper. Refer to Disassembly & Assembly.
Disengage fixing pawls and then remove rear heated seat switch
.

| : Pawl |
INSTALLATION
Install in the reverse order of removal.