Removal and Installation
In this manual: Removal and Installation
~1min read
- Chassis Control Module
- E-Step Switch
Chassis Control Module Nissan Ariya 1st generation
CHASSIS CONTROL MODULE : Removal & Installation
REMOVAL
Remove the instrument panel. Refer to Removal and Installation.
Disconnect chassis control module harness connector.
Remove the chassis control module.
INSTALLATION
Note the following, install in the reverse order of removal.
When replacing the chassis control module, be sure to perform the configuration of chassis control module. Refer to Work Procedure.
E-Step Switch Nissan Ariya 2026
e-Step SWITCH : Removal & Installation
Remove center console finisher. Refer to Disassembly & Assembly.
Was this page helpful?